Plastivision India 2007

Plastivision India 2004

Held once in three years, Plastivision India is considered as one of the most important national trade shows for the Indian plastics industry. Featuring various segments of the industry, this exhibition is organised by All India Plastics Manufacturers’

Plastivision India 2004, the sixth in the series was held from December 23-27, 2004. It was inaugurated by R R Patil, deputy chief minister of Maharashtra at NSE Complex, Mumbai. While Nawab Malik, minister for labour, Government of Maharashtra, was the chief guest, Kamal Nanavaty, president, Polymers and Crackers – Reliance Association (AIPMA). Industries Ltd, and

Ghisulal Rathod, Cello Group were the guests of honour. Another first for AIPMA was the unique threeday seminar on ‘Unleashing India’s true potential in plastics’ with speakers expressing their views on varied subjects. The seminar sessions were chaired by eminent personalities from the plastics industry. The exhibition highlighted the industry’s growth & progress and also proved that India is emerging as one of the most promising hubs for plastics. The visitors’ influx set a new record and there were visitors from all over the country as well as neighbouring nations. Business visitors from UAE, Middle East as well as the US were present at the exhibition and had tie-ups with Indian exhibitors this time. The exhibitors were happy that they had a good volume of the business generated at this event.

It was indeed a mega event for the entire plastics industry where participants could converge to establish new relations and conceive new ideas. This event also provided an opportunity for various businesses to showcase their product innovation and technology to the world and at the same time gain new insights into the latest technologies available. Further, Plastivision India 2004 proved to be an ideal platform for entrepreneurs to interact with internationally renowned companies and broaden their horizons.

Kailash B Murarka vice president (West Zone), AIPMA and co-chairman - marketing (West Zone), PVI 2007
Plastivision India 2007 (PVI 2007) is in pursuit of growth excellence, and it gives me immense pleasure to meet you through this medium. As a result of the confidence and credibility established by AIPMA during the course of the previous six expos, we are once again flooded with an overwhelming response from exhibitors for the forthcoming PVI 2007. The forthcoming event will be spread over more than 40,000 sq m with increased number of exhibitors and product profiles. Besides, there will be international participants from countries like Belgium, China, Italy, Germany, Switzerland, Japan, Taiwan, Singapore, Malaysia, Korea and UAE. Today, the Indian plastics industry offers immense opportunities as far as exports are concerned. It is		also gaining momentum in segments like plasticulture, medical plastics, healthcare, IT-related products, energy conservation and infrastructure, among others. The petrochemical industry too plays a vital role in the economic growth and development of the Indian plastics industry. Downstream of plastics processing sector is highly labour intensive, which currently provides good employment opportunities and also has the potential to generate employment by 2011-2012. I am confident that PVI 2007 will not only help new entrepreneurs to consolidate their market presence, but also help them finalise new contracts and business. The concept of this ‘Exhibition Preview’ as a medium to showcase new applications and product profiles will certainly yield good results in locating customers and business visitors at PVI 2007, which is scheduled to be held from December 6-10, 2007. I wish all the exhibitors success and good luck.

Raju D Desai honorary secretary, AIPMA and chairman - Visitors’ Promotion Committee (International), PVI 2007
India is steadily emerging as a sourcing hub for plastics. The plastics sector is on the growth path with increasing number of units being set up across the country. In such a scenario, Plastivision India 2007 serves as the right opportune event for generating long-term business prospects.		Our new initiative of bringing out Exhibition Previews with specialised product profiles has been welcomed by the industry. With participation from several foreign countries, Plastivision India 2007 would certainly be an event to remember, and hence one should not miss this opportunity. We wish the exhibitors good business and good prospects at PVI 2007.

Dr M B Parmar joint honorary secretary - AIPMA and chairman – Visitors’ Promotion Committee (National), PVI 2007
Plastivision India 2007 has gained international stature and will be the most important and biggest show witnessed by the Indian plastics industry in 2007. More than 600 exhibitors will showcase their products in three air-conditioned halls. This is a proven industrial plastics show organised by AIPMA – an organisation that has been serving the Indian plastics industry for over 60 years now.		With India emerging as the sourcing hub for plastics, we are glad to inform you that PVI 2007 will cover over 40,000 sq m area booked by different segments of the industry. It will also witness live demonstrations by leading machinery manufacturers. Organisers of PVI show are planning to provide world-class facilities such as business centres/ conference rooms besides a clean and hygienic cafeteria for the visitors and exhibitors.

HRP precision injection moulding machine

Huarong Plastic Machinery Co offers HRP precision injection moulding machine. It comes with PQ valve implemented close-loop system. To control pressure & speed, both clamping and injection carriage are available with five segments. While the injection carriage (forward) is offered with two segments, the ejector (forward/backward) comes with three segments and can be controlled by a potentiometer.

This injection moulding machine also has a proportional valve with linearity and temperature compensation ability. With the HELP menu description, insufficient and overflow injection can be detected.

Injection moulding machine

Jih Hsing Electric Apparatus Manufactory Co offers a range of products and services. The injecting machine offered by the company has a shot weight ranging from 4.5 oz with 80 tonne clamping pressure to 375 oz with 1,680 tonne clamping pressure. The company also produces battery, plastic container sets, computer monitor casing & components, light lamp cover, vehicle plastic cover, sporting goods and furniture, among others. It also offers complete CAD/CAM engineering capability for design of new and revised products, as well as a complete onsite tool room for mould revisions and repairs.

Hall 6

Moving die rheometer

Gotech Testing Machine Inc offers M-2000 moving die rheometer (rotorless cure meter) that is used for the measurement of selected vulcanisation characteristics of rubber compounds. The M-2000A can be used to isolate the die’s opening and frame by the sealed ring, thus the upper and lower die can be totally sealed. On the other hand, M-2000 can be used to precisely adjust the gap between upper and lower die freely.

The moving die rheometer is equipped with a computer (includes monitor, floppy disk, hard disk and a printer). This computer can be used to control the temperature.

The other accessories include torque calibrator (inside the main unit), two heater plates, a pair of gloves, power regulator, screw driver, 500 sheets of printer paper and 10 sealed rings (only for sealed die)
Hall 6

Hotrunner controller

Selectron Process Controls offers hotrunner controller TC75 for the plastics industry. This controller is a microprocessor-based, 3-digit dual LED display temperature controller. This product is available in single to multiple zone configurations. It comes with superior PID auto tune control algorithm with closed (auto) and open (manual) loop operation. It operates with industry standard ‘J’ or ‘K’ type thermocouple with °F or °C temperature configurations selectable option. All mould performance and monitoring information is accomplished by using the operator interface panel located on the front of controller with universal symbols. The controller comes with special features like Ramp start to prolong heater moisture, built in diagnostics with alarm and heater current monitoring. This hotrunner is designed with in-built zero crossing triac triggering output (15 amp) to get the correct ratio for the output power requirement. This controller is available with mainframes, cables and connectors.

Hall 1, Stall B-8,9

Plastic blow moulding machine

jagmohan Pla-Mach offers plastic blow moulding machine from 100 ml to 2,00 ltr. The company also manufactures blow moulding machine with auto-deflashing from 200 ml to 5 ltr capacity. The range of products include single/double station, double colour, multi layer and special kind of machine as per customer’s requirement. The company also offers complete turnkey project for producing blow moulding containers. It has technical knowhow and relevant industrial experience in the field of machine design, manufacturing, supply of ancillary equipment and mould. The company can also prepare the complete project, develop blow moulding machine, outsource the ancillaries and commission the project at the site. The company’s superfine and high production rate 210 ltr (modified) blow moulding machine is capable to produce 30 to 32 containers of ‘L’ ring of 8.2 kg each per hour out of extra HMHDPE material.

Hall 1, Stall C-4,5

Double-drive axle crusher

omkar Sales offers SGS**60 series light model double drive axle crusher machine manufactured by Shini Plastics Technologies Inc. This machine series was created to resolve the problem and design question posed by crushing machines, which were unable to recycle waste material. Integrated in the double axle crushing Machines is the latest Vshape array cycling cutting technology.
With superior machine performance, compact structure, attractive design, powerful capabilities, it is a top performer among light crushing machines. It is suited to a wide range of use for plastic injection moulding machines, and conveniently adapted for all kinds of plastic parts, viz, plastic sticks, every kind of thin layered plastic products, foam mattress, tissue waste, fodder, wood pieces, scrap wood and crushed car wheelwaste.
This machine uses the latest V shape array cycling cutting technology; it solves the problem of crushing waste without hindrance. It increases machine stability during the crushing process and employs two units of 15 kW speed regulator. During the crushing process, it rotates towards the opposite direction of the input, the distance from the single axle rotation could reach 3,460 Nm.
This machine is suited to long-term use, the crushing chamber can be dismantled, maintenance is convenient, and is manufactured as per European safety standards. Double-drive axle crusher

Hall 5, Stall B 6

Plastic dispenser

turbhe Polycans Pvt Ltd, a leading manufacturer of plastic dispensers, offers a wide range of products, ie, trigger sprayer, finger tip sprayer, liquid dispenser and push pull cap. Trigger sprayers are widely used at home, in industry, agriculture and for other various purposes. Finger tip sprayers are widely used for household cleaners, automotive care , haircare, various pharmaceuticals and pet care industry. Liquid dispensers are widely used for liquid soap, lotions, shampoos and hair conditioners. Push pull caps are widely used in water bottle, sports bottle, liquid food and various industries.

Hall 6, Stall E5-2

Electronic balances

Contech Instruments Ltd offers precision electronic weighing machines ranging from 0.001 gm accuracy to 100 tonne based on electro-magnetic field compensation (EMFC) technology. Its analytical balances come with motorised internal calibration and standard bi-directional RS-232 interface. These are ISO GLP compliant and have multiple weighing units. Along with a backlit LCD graphical display, these have several functions like % weighing, counting, fill mode, GSM, etc. These also have capacity tracking indication as well as a density determination kit.

Apart from high precision weighing balance based on EMFC technique, the company also offers loadcell based weighing scales. Its range of products include tabletop scales, platform scales, pallet scales, crane-weighing scales, hanging scales and electronic weigh bridges.

Hall 5, Stall L-2

Piping systems

Jyoti Plastic Works offers SureflowEFLO™ piping systems that are manufactured from 100 per cent polypropylene random copolymer resins. These pipes are fusion welded and pressure tested to a maximum pressure of 20 kg/cm2.

The fittings for PPR piping systems are high pressure and high temperature resistant, thus making it ideal for hot and cold water supply application. These are non-toxic and hence suitable for drinking water supply. High impact resistance makes its use possible in external applications.

The fusion welding process offers risk free joints and leak proof piping system. These are corrosion and maintenance-free. Due to low thermal conductivity, heat loss is minimum and in ratio of 1:200 as compared to metallic pipes. These are easy and fast to install and light to handle.

The company offers in-house ‘concept-to-commerce’ facilities which include injection moulding, extrusion, composite moulding, plastic fabrication, tool room and testing, among others. The products offered by the company are used for various applications like process, fluid engineering, automobiles, electrical & electronics, infrastructure & construction, water treatment, etc.

Hall 6, Stall E1-4

Nylon masterbatches

Polyblend Colour Concentrate offers nylon masterbatches for polyamide spin-dyeing. These are supplied in the form of granules (approximately 3 mm in length; Ø = approximately 2.5 mm). In most cases, dosing equipment is installed on the existing spinning system. The masterbatch is metered directly into the polyamide chips flow by a gravimetric dosing unit. For some specific processes, masterbatch can be added through a side-stream extruder.

Hall 5, Stall E-1,1

Octroi exemption has been granted by Brihanmumbai Municipal Corporation (BMC) for goods entering inside Mumbai city for Plastivision India 2007 exhibition. However, certain formalities have to be completed to avail of this octroi exemption.

(A) Every exhibitor has to deposit a refundable amount of Rs 5,000 by Demand Draft in favour of ‘Municipal Corporation of Greater Mumbai’ per ‘R’ form. This amount has to be deposited with the Octroi department at the check post at the time of entry of goods inside Mumbai. Exhibitors should also send the rubber stamp, necessary documents and the following undertaking on their letterheads in the format mentioned below along with their truck/vehicle. The appointed official octroi agents will provide ‘Octroi exemption certificate’ for each participant at the octroi checkpost (Dahisar, BPH and EEH).
*Note: Please prepare the following certificate on your letterhead.

To whomsoever it may concern:

This is to certify that we are sending _____ packages in words ( ) of exhibition goods for ‘Plastivision India 2007’ exhibition scheduled to be held at Bombay Exhibition Centre, Goregaon (East), Mumbai 400 063 from December 6-10, 2007.
The said goods are of no commercial value and not for sale. The above mentioned goods value Rs 5000 only.

Thank you,
Yours faithfully
For (participating Company Name)
Authorised Signatory

(B) Every exhibitor has to pay Rs 1,800 in cash to octroi agent for completion of incoming and outgoing octroi formalities Refund of deposit Procedure for refund claim of the deposit amount of Rs 5,000 will commence six months after close of exhibition. The refund cheque from BMC will be obtained in the name of each individual exhibitor. Details of octroi agents • Dahisar Check Naka Munaf/Firoz Indian Octroi Centre Behind Shree Krishna Hotel Dahisar Check Naka Tel: 022-2891 6197/9327	• Eastern Express Highway Bipin/Ganesh Jaiyogeshwar Octroi Services Shop No 4, Nayan Co-op Society Near MA Balniketan School, Thane Tel: 022-2537 6070, 2540 6045 Mob: 98201 40001 • Chembur Naka Bipin Katira / Ravi Jaiyogeshwar Octroi Cabin 26, Bombay Panvel Highway C/O Durga Hotel BPH Highway Naka Tel: 022-2555 0282, 2895 6555 Mob: 98210 26104	* Please do not use Mulund Check Naka on LBS Marg Please ensure that along with the ‘R’ form (which should be triplicate), each exhibitor should submit bonafide participants letter from the organiser.

International Seminar

Organised by
AIPMA
on
7th - 8th December 2007 at NSE Grounds, Goregaon, Mumbai

For more information contact: