Reference NumbersAIE - 4235
ProductStandard Drying Loaders
ManufacturerShini Plastics Technologies India Pvt Ltd
1) SDL series "Standard" Drying loaders integrate plastic drying and loading into one unit.
- Especially applicable to that large injection moulding machine which are placed in height limited workshop
- This combination offers a group of standard photo sensor hoppers, which can be used to load dried materials.
- Besides, SAL-900G is available for choose to realize the two-stage loading function.
- Adopts P.I.D. temperature controller to accurately control regenerative temperature.
- Various model for customer to choose freely.
- Takes little space and easy for transportation.
- Stainless steel hopper ensures no material pollution.
- Hopper separated from its base, which ensures convenient cleaning.
- A closed loop material loading system to prevent the dried material from contacting with outside air so to avoid moisture reabsorption.
- Hopper is ready for polishing so to ensure no material pollution.
- Equipped with alarming light to show faults at once.
- Single tube suction box is a standard accessory.
- SDL-300 and even smaller models below it are equipped with standard base. SDL-400 and even bigger models above it are equipped with magnetic base.
- SDL integrates drying and single stage loading into one unit, adopts temp. controller to accurately control temp. 24-hour timer is available for choose.
- Environment protective hot air recycling device can save energy without hot air or dust discharging.
- Can match with SAL-900G to realize the two-stage loading function.
- Hot air recycler, blower inlet filter, air filter, cyclone dust collector, magnetic base, hopper magnet, Euro suction box as your options.
2) SDL-U series of drying loaders combine conventional hot air drying and two-stage conveying functions into a compact unit.
- It is particularly suitable for using with the big tonnage moulding machines when height restriction is concerned at the workshop.
- The SDL-U series has a unique function of two-stage conveyingf that can transport both raw material to its own drying hopper and dried material to the moulding machine.
- SDL-U integrates autoloading and drying into one unit, while SDL-U-HD integrates dehumidifying, drying and autoloading into one unit.
- Adopts microprocessor and P.I.D. control system to accurately control drying temperature.
- Occupy a small place, making movement easily and replacing units conveniently.
- Hoppers are made of stainless steel to avoid contamination.
Full functional alarming system can immediately show faults.
- Closed-loop conveying device eliminates the possibility of moisture reabsorption during dried material conveying.
- Hot air recycling device is equipped as a standard, featuring energy saving, no exhaust of hot air and dust, and environmental protection.
- Standard shut-off suction box ensures no residual material after each loading process.
- European type heat insulated hopper ensures no heat loss and no material pollution.
- 7-day start/stop timer is standard equipment, which can be customized.
- Heatless regenerative device of SHD-U-HD can supply dry air with relative low dewpoint to speed up material handling process.
(For images, please see next pages)
For More Details Contact:
Shini Plastics Technologies India Pvt Ltd
Mr. J N Bhat
Email ID: firstname.lastname@example.org