Noticeably increasing demand towards very high clarity packaging articles at reasonable price has led National Petrochemical Industrial Co. (NATPET) to upgrade its range of polypropylene random copolymers. The Saudi Arabian company has introduced two new grades in its Teldene® range, both containing Milliken’s Millad® NX 8000 latest-generation clarifying agent. They are aimed principally at markets for thin-walled injection molded food and non-food containers, especially in Europe, Turkey, the Middle East, and Asia.
As living standards improve in emerging markets, end-users are putting increasing emphasis on aesthetics when buying products such as food storage containers. The new grades cater for this demand. Additional advantage of this grade by virtue of having Millad NX 8000 is that it enables the converters to achieve added benefit of considerable energy and cost savings (value for price) by processing the grade at lower temperatures and cycle times than by similar products in the market. The two new grades, Teldene R25MLT and R40MLT, have melt flow rates of 25 and 40 g/10 min respectively. Mechanical properties are very similar, but Teldene R40MLT, with higher flow, is better suited for complex products and high-speed machines. Both are reactor grades, produced using LyondellBasell’s Spheripol technology, which has an exceptional advantage of producing morphologically uniform resins. Neaz Ahmed, Asst. Manager Product Application at NATPET, says that being reactor grades these ones enjoy an important lead over “controlled rheology (peroxide vis-broken)” grades having intrinsically organoleptic-neutral (odorless) character – an essential requirement for food-contact applications. “End users as well as converters in our target markets are very appreciative of the improved aesthetics, cost and time savings, and wider processing window achievable with the new grades.”
Parts molded with these grades have excellent optical properties; at a thickness of 1 mm, the Haze value is just 6%, compared with 15-20% in grades containing conventional clarifiers when processed at low temperatures. This is attributed to the highly improved solubility of Millad NX 8000 in PP. Injection molders can therefore make significant energy savings and reduce cycle times (decent cost and time savings), while still obtaining articles with outstanding optical characteristics. Reduced energy consumption also means a lower carbon footprint, an environmental factor of thoughtful significance. Ahmed says, “Processors using the new grades can reduce ecological Carbon Dioxide generation by five to eight percent.”
NATPET sees strong potential for PP grades clarified with Millad NX 8000 to open up new business opportunities, especially in China and Turkey. It says the addition of such high value-added products to its portfolio is providing access to more diverse applications. NATPET is already considering extending its range of Teldene PP random copolymer grades, clarified with Millad NX 8000, with higher flow properties, which would likely extend its market prospects even further.