Plastics Portal For Buying And Selling Plastic Products
CONNECTING BUSINESSES IN THE WORLD OF PLASTICS
Go to->Home - PlasticNews
Draft Discussion Note on Policy for Setting up of Plastic Recycling Units i... (23-8-2010)
 
1. At present as per rule 18(4) of the SEZ Rules, the Board of Approvals (BOA) for SEZs does not consider proposals for setting up plastic waste/scrap recycling units within SEZs. For existing units also extension of Letter of Approval (LOA) by the Board is decided on a case to case basis by the Board.
2. Rule 18(4)(b) also stipulates that proposals for enhancement of approved import quantum of waste and scrap beyond the average annual import quantum of the unit since its commencement are not be considered by the Approvals Committee. Hence, currently setting up of new plastic recycling units within SEZs is not allowed and extension of LOA is subject to stringent conditions.
3. Point No. 40.3 in the agenda circulated before the 40th meeting of BOA on June 10, 2010, noted that there is a need to finalize the policy for setting up of plastics recycling units in SEZs and during the 39th BOA meeting, the BOA had specifically directed that the same be done at the earliest.
4. On January 7, 2010 a meeting chaired by Shri Anil Mukim, JS, Dept of Commerce was convened to deliberate upon the issue and it was recommended that non-toxic/non-hazardous plastic waste/scrap be allowed to be imported provided the conditions laid down by DGFT for the same are satisfied. It was also recommended that for existing recycling units the letter of approval may be extended provided they comply with all environmental laws.
5. The recycling industry's argument against such restrictions is that processing of plastic waste is an activity which generates employment. It was pointed out that mostly recycling units within SEZs make agglomerates which are sold in the DTA on payment of full duty.
6. Under the present import regime, import of agglomerates is freely allowed and reprocessing of plastics in SEZs results in import substitution. Hence, manufacturing of agglomerates in the SEZ leads to additional jobs and value addition in the country without any revenue implications as sale in the domestic market is on payment of full duty.
7. To formulate an appropriate policy on the subject several inter-ministry consultations were undertaken which were inconclusive and there is no clarity on the issue. In the absence of clear cut directions, BOA as a temporary arrangement has been extending the LOPs of the existing units subject to the final decision on the plastic reprocessing activity by the SEZ units.
8. The key questions facing the stakeholders, which need to be addressed, are the following:
- Review of the present restrictions on permitting setting up of a new SEZ unit for recycling of plastic waste in SEZ.
- Permission to existing reprocessing units in SEZs to continue operations and revalidation of LOP.
- -Whether, mandatory physical exports of the goods made from reprocessed materials produced by units in SEZs be made a part of the policy and what will be a reasonable level of export obligation.
Previous News Previous News
Next News Next News
Forward to friend Forward this news to friend Print this News Print this news
Back
Back To Recent News Archives
Disclaimer
Recent News
• Tight supplies pave the ground for ethylene increases in Asia
• Alpek and BASF ink agreements regarding EPS and PU businesses in Americas
• CEPSA selects Badger Licensing to provide technology for new Cumene plant in Shanghai
• Mitsubishi to discuss US$850 mln petrochemical investment in Trinidad & Tobago
• Small-scale polymer solar cell with a conversion efficiency of 11.5% eclipses previous best
  
Available
UM-9929 50 mm Blown Film extruder for the manufacture of polypropylene fi...
UM-9924 Model: Rotopak 2000 - Printing width: 1120 mm - Printing repea...
UM-9925 120" Gloucester 421 Bag Machine, Rebuilt by J & C
UM-8750 - Film production quantity maximum per month: approx output: 40 t...
UM-9922 Model: JSW J-350E - Quantity: 1 - Year: 1995
UM-9921 For more details please see next pages
UM-9920 80 ton, 90 ton, 120 ton, 150 ton Injection molding machines more ...
UM-9919 - With 150 mm DS extruder - 33D - Flex Lip Die - 2950 mm x 500...
UM-9918 - (1) Used 4.5" Sterling Extruder - 40:1 L/D - Electrically hea...
UM-9916 - Davis Standard 60" Wide X 24" O.D. - 3-Roll chill roll stack ...