Plastics Portal For Buying And Selling Plastic Products
CONNECTING BUSINESSES IN THE WORLD OF PLASTICS
Go to->Home - PlasticNews
DSM to invest €100 mln in three new R&D facilities in the Netherlands (24-5-2012)
 
Royal DSM has announced that it is going to invest approximately €100 million in three new R&D facilities in Delft and Sittard-Geleen (both in the Netherlands) over the next two years. The investment confirms DSM’s commitment to the Netherlands, where the Life Sciences and Materials Sciences company was founded over 110 years ago. The investment in Delft concerns a new laboratory for biotechnological research as well as a DSM contribution to the recently formed consortium for the Bioprocess Pilot Facility (BPF) for bio-research. In Sittard-Geleen a new materials sciences research building will be realized on the Chemelot Campus. Since the new R&D units will closely collaborate with knowledge institutes, government bodies and other companies (including SMEs), the investments will have a major impact on the strengthening of the Dutch knowledge-based economy, precisely in the fields that the Dutch government has designated as key top sectors for the future.
The laboratories in Delft and Sittard-Geleen are expected to open their doors in 2014. Some 700 researchers will be working there on innovative solutions to major global challenges in fields such as energy & climate and food & health. As such, the investments fit in with the Netherlands’ position as a front-runner in the field of sustainability.
The Delft-based DSM Biotechnology Center supports the innovation processes of DSM Food Specialties, DSM Sinochem Pharmaceuticals, DSM Biobased Products & Services and DSM BioSolutions. The new laboratory in Delft will house the R&D processes of the DSM Biotechnology Center, offering working space for 285 people and meeting the highest standards for biotechnological research. The province of South Holland contributes to the realization of the research building in the form of an agreement under which there will be scope for the development of an open campus on the DSM site. This will give biotech start-ups a place for rapid growth in the Northern part of Delft. A number of facilities in the new building will also be available to these companies. Besides realizing a new laboratory in Delft, DSM also is a partner in the recently opened ‘Bioprocess Pilot Facility’ (BPF) on the DSM site in Delft. This consortium, in which DSM, CSM/Purac and Delft University of Technology collaborate, boasts facilities for upscaling biotechnological processes that can be used for both R&D and educational purposes. The BPF is of key importance for upscaling fermentation and purification processes as well as for the pretreatment of vegetable residues to convert them into fermentation feedstock, for instance as used for second-generation biofuels.
Previous News Previous News
Next News Next News
Forward to friend Forward this news to friend Print this News Print this news
Back
Back To Recent News Archives
Disclaimer
Recent News
• Sipchem shortlists HSBC as adviser for Sahara merger
• BP receives approval from Chinese government for Zhuhai PTA plant
• Polymer Group to invest in Nanhai to expand capacity of non woven products
• Petrobas Board of Directors approves restructuring of its petrochemical portfolio
• Kuwait Petroleum International to break ground on Vietnam refinery and petrochemical complex in July
  
Available
UM-8242 - Tie bar spacing: 28" x 28" - Platen size: 42' x 42" - Dayligh...
UM-8241 Model: 35IN35 - One (1) used 3.5" Davis Standard extruder - 30:...
UM-8240 Model: HL1100 - Platen size: 76.77" x 70.87" - Distance between...
UM-8239 Model: Hydradamp Wide-Platen '84 Remanufactured:'96 Camac 486 Co...
UM-8231 - Volume cm3: 392 - Cores: 2 - Between tie bars: 510 x 510 Mou...
UM-8224 1) Davis Standard / Maag Melt Pump Model: 70/70 - Mounted on c...
UM-8223 Model: 45/45 - Replacement Pump Only - No drive or Controller ...
UM-8237 Model: 1000 - Auto cut - 40" roll capacity - Hydraulic toll un...
UM-8236 1) Nissei 400 Ton Injection Molding Machine - Shot size: 47.68 o...
UM-8235 - Volume cm3: 13,254 - Cores: 5 - Between tie bars: 1,750 x 1,2...