PCM - 2724
Extruding and Film Casting Machine (Stretch Film Making Machine)
Used for producing LDPE stretch film
Is equipped with single screw; the extruded stretch film has adhesives on both sides. If the machine adopts double screws, the two hoppers should use different type of material, one side of the extruded stretch film is adhesive and the other side is normal. It is widely used for packing architecture and hardware parts etc.
Main Technical Parameters
Diameter of screw - Die 60 mm
L/D - 30:1
Width of products - 200-550 mm
Thickness - 0.015-0.03 mm
Output - 30 kg/h
Main motor power - 15 kw
Heating power - 30 kw
Machine weight - 3 T
Overall dimensions - 6000×1500×2500 mm
Power supply - 380/3/4/50(Volt/Ph/Line/Hz)
- Screw and cylinder are all made of 38CRMOALA alloy and treated by nitrogen. It has an advantage of corrosion resistance and endurance etc.
- The cooling device adopts cycle water-cooling provide the best transparent effect of the stretch film.
- Take-up equipment adopts friction type rewinding, and equipment with edge correcting device to ensure quality.