Four station surface winder

Incorporating:

- Winder type: Surface winding

- No. of station: Four

- Nip Roller assembly

a. Chrome-plated cylinder: One

b. Pressure cylinder (rubber covered): One

c. Opening of the cylinders: Pneumatically operated

- Surface winding drums

a. Two surface drums on self aligned pillow blocks

b. Radial displacement for four winding shafts on bearings working simultaneously

- Side / Centre slitting: 6 nos.

- Web rollers: Provided to guide the film upto winding shafts

- Bow rollers: Provided for wrinkleless winding

- Trim collection venturi system: 0.75 KW

- Air expandable shafts: 4 nos.

Drive details:

- Nip roller assembly: 1.1 KW (AC frequency driven)

- Surface winding drum: 1.5 KW x 2 nos. geared motor (AC frequency driven)

- Linear speed: 60 mts/min.

- Digital programmable length counter: Included

Operational requirement (To be provided by the customer)

- Power supply: The supply voltage should be 415 +/- 5 percent.

If the voltage fluctuation is beyond this limit, it is essential to install a voltage stabilizer.

- Total connected load: 183 KW

- Working area: 14 x 5 x 11 mtrs (LxBxH)

- Cooling Tower (Recommended):

(For grooved feed extruders and gear boxes)

- Heat Transfer rate: 10,000 Kcal/hr

- Inlet water temperature: 25 degree C

- Temperature rise (max): 5 degree C

- Compressor (Recommended)

(For bubble inflation & Pneumatic cylinders)

- Single stage

- Displacement: 566 Ltrs/min

- Working pressure: 10 kg/cm square

- Motor: 3.75 KW

- Tank capacity: 150 litres

- Water pump: 2 HP

- Hot air drier & loader