| Click
on Enquiry to View Details |
| |
| URGENT
REQUIREMENTS |
 |
|
High
speed 3 Layer 250 kg/hr HM/LL/LD film plant
for producing 2.2 meter lay flat width tubing
Minimum output 250 kgs/hr
Film thickness - 50 to 150 microns
Machine should be in good working condition and
less than 10 years old, and of reputed brand only |
Extrusion Machine for PET Monofilament Yarn
- Flaments are to be used for manufacturing paint
brushes
Capable of extruding monofilament made of PET, PBT,
PET / PBT mix.
Able to make filaments both from the recycle material
as well as the virgin chips
Production capacity should be about 40-50 kgs per
hr.
Able to produce both the solid and the hollow filament
from the same machine just by changing the die.
No other changes in the machine should be required.
Required diameter : between 0.1 mm to 0.3 mm
Interested seller may contact us at:
Tel No. +91 22 26736750 / 51 +91 98694 34892, Email:sales@plastemart.com |
FIBC
bags required by one of the leading food
companies in the world.
Manufacturer must have AIB (American Institute of
Baking) certification, Metal detection capability
and well equipped testing facility.
Interested suppliers may write to:
sales@plastemart.com |
| Pet
Preforms : 1 million pieces of 24 gram
+/- 1 gram for exports to Africa |
PVC
off grade resin : K65 / K67 any colour,
upto 500 Tons / Month
Clean PVC waste, regrind of cable grade, pipe
grade, (both soft and rigid waste) |
Plastic Melamine
Product manufacturing Machine - Reconditioned
or Brand New
to manufacture Plastic Melamine utensils such as
Plate, Tea Pot and Mug. |
100
kg/hr PVC Pipe Plant to produce pipe size
2" and 4", Application of Pipes : Electrical, Water,
Sanitary
Location: Columbia, South America |
|
uPVC SWR Drainage Pipe Fittings in Germany or in
Italy |
|
| HDPE
recycled material to manufacture trash /
garbage bags & also shopping bags, Quantity:
200 MT per month Any colour acceptable.
White, Blue, Black or mixed. Terms & Conditions:
Price not more than USD 500 / Ton (based on June
2006 prices) Quote CNF Kuwait City.
|
PVC Scrap material suitable to manufacture
rigid PVC pipes
Color: White & Clear Grey
Location: Cif La Guaira Venezuelan sea port. |
Recycled
LLDP/LDP in natural colour (next to virgin
mat.) : 50 mt during 3 months starting September'
06
Price range - Rs. 50-55 per kgs
Location: Northern India |
White
PP Flakes or Granules, Qty
50 - 100 Tons a month.Milky white, Natural
(but not greyish) and white shades are acceptable
, MFI 3 to 12 is acceptable
Delivery required in Mumbai, India , Filler shoud
not be more than 5% |
RAW
MATERIALS AVAILABLE AT FANTASTIC PRICES
|
| HDPE
for blow moulding with high filler content. Price
INR. 29 per kg |
| HDPE
black for houseware at Rs. 36 per kg. |
SAN in various colours at
INR 39 per kg
Grey & Black SAN at INR 36 per kg
Natural SAN at INR 46 per
kg
Material
is suitable Gift Items and Pen |
ABS
in colours at
Rs. 51 per kg
ABS Steel Grey Rs.49,
ABS black Grade I INR 33
ABS Black Grade II INR 29
Material
suitable for applications such as engineering parts,
moulding, components of household applicances |
HIPS
Black at INR 29 per kg
HIPS multi coloueds at INR 41 per kg
Suitable for sheets, moulding, extrusion |
| STATE-OF-THE-ART
PRINTING EQUIPMENT from POLYGRAPH |
|
|
|
|
|
|
|
| USED
MACHINERY AVAILABLE |
|
| Windsor
SP 300 Injection Moulding machine |
| Windsor
SP 230 Injection Moulding machine |
Double
Wall Corrugated Pipe Line
All Line New, Worked Approx 3595 Hours, Worked on HDPE
and PP - Diameter 94-110MM, located in USA |
| Film
Blowing Line with 8 Printing Machines of 2-Color Flexographic
and 2 Printing Machines of 4-Color Flexographic
Used only for 6 months |
| Computer-controlled
Bag Maker Used only for 6 months in USA |
|
Hemingstone High-Speed Bag-Making Machine-
, 6 months of use In USA |
| IMF
Hurricane Resin Blending/Mixer, Blending Capacity:
1,000 lbs/hr Used for 6 months , Location, USA |
| High
Output Blown Film mono extrusion line,
Location: Europe |
|
|
| 2.2
Mtr, 250 Kgs/ hour LD/LLDPE Film Plant |
| Battenfeld
Calandrette Line with thermoregulation unit,
completely overhauled, For rigid and semi-rigid PVC foils |
| Windmoller
Holscher Extrusion Line for Production of polyethylene
(PELD and PEHD) film, Capacity-25 MT per month |
Uniloy 1 liter Blow Moulding Machine at Brazil
 |
| SPARE
PARTS & COMPONENTS |
|
|
|
|
|
|
|
|
|
|
|
|
|
| PRINTING EQUIPMENT |
|
|
|
|
| |
|
|
|
|
|
| FLEXOTECNICA
Stack-type flexo press in-line, year 1987, 6 Colour Flexo
Printing Machinery, Location: Europe |
|
|
| AUXILARY
EQUIPMENT |
|
|
|
|
|
|
|
|
|
|
|
|
| Pre-Heating
Ovens |
| Pre-Heating
Ovens |
|
|
|
|
|
|
|
|
| Granulator
"BRANND TRIA" Italian made. Delivery Time: Ready
Ex Stock |
|
|
|
|
MASTERBATCHES
AND ADDITIVES |
| Universal
Masterbatches in over 700 colours |
| MOULDS |
For
All Molds listed below, contact
Gujarat
Toolroom Ltd, India, Mr. Suresh Jain,
Mobile No.: +91 9825414699 Telephone No.: +91 79 25830117
/ 25896949, Email Id: kinariwala@icenet.net |
Mould
set for Audio Cassettes
Cassette Top Cover:
Mould Size: 420X346X264 , Mould Weight: 265 Kgs, No.
Of Cavities: 4, Material of Mould: STAVAX, Product Material:
PS,
Residual Life of Mould: 4 Million Shot , Status: Ready
Cassette Base Cover:
Mould Size: 396X296X260, Mould Weight: 210 Kgs, No.
Of Cavities: 4, Material of Mould: STAVAX, Product Material:
PP
Residual Life of Mould: 4 Million Shot, Status: Ready
Cassette Housing:
Mould Size: 360X296X260, Mould Weight: 205 Kgs, No.
Of Cavities: 4, Material of Mould: STAVAX, Hardness
HRC: 45 TO 48, Cycle Time: 15 Sec, Product Weight: 11.5
grams, Product Material: PS, Residual Life of Mould:
4 Million Shot, Status: Ready
|
Mould
set for Pens
Pen Barrel
Mould Size: 496 X 346X290, Mould Weight: 390 kgs., No.
Of Cavities: 16, Material of Mould: STAVAX, Hardness
HRC: 45 TO 48, Cycle Time: 30 Sec, Product Weight: 7
gms, Product Material: SAN, Status: 90 Days from the
date of receiving advance
Pen Cap
Mould Size: 496 X 346 X224, Mould Weight: 300 kgs, No.
Of Cavities: 16, Material of Mould: STAVAX, Hardness
HRC: 45 TO 48, Cycle Time: 20 Sec, Product Weight: 3
grams, Product Material: PC, Status: 90 Days from the
date of receiving advance
Pen Button
Mould Size: 296 X 246 167, Mould Weight: 95 kgs, No.
Of Cavities: 32, Material of Mould: STAVAX, Hardness
HRC: 45 TO 48, Cycle Time: 15 Sec, Product Weight: 1.5
grams, Product Material: PP, Status: 90 Days from the
date of receiving advance
|
Moulds for Thin Wall Containers
Mould Size: 296X296X369, Mould Weight: 175 kgs, No.
Of Cavities: 1, Material of Mould: H-13, Hardness HRC:
45 TO 48 Cycle Time: 10 Sec, Product Weight: 17.3 grams,
Product Material: PP, Residual Life of Mould: 4 Million
Shot, Status: Ready
|
Moulds
for Dabur Type Cap
Mould Size: 396X296X324, Mould Weight: 230 kgs, No.
Of Cavities: 8, Material of Mould: H-13, Hardness
HRC: 45 TO 48 Cycle Time: 18 Sec, Product Weight:
7 grams, Product Material: HDPE, Residual Life of
Mould: 3 Million Shot, Status: Ready
Mould Size: 396X296X220, Mould Weight: 230 KGS, No.
Of Cavities: 12, Material of Mould: H-13, Hardness
HRC: 45 TO 48 Cycle Time: 23 Sec, Product Weight:
4 grams, Product Material: HDPE, Residual Life of
Mould: 3 Million Shot, Status: Ready
|
Moulds
for Nicorin type Cap, Bottle, Pug
Mould Size: 246X196X220, Mould Weight: 96 KGS, No. Of
Cavities: 4, Material of Mould: H-13, Hardness HRC:
45 TO 48 Cycle Time: 20 Sec , Product Weight: 3grams,
Product Material: HDPE, Residual Life of Mould: 3 Million
Shot, Status: Ready
Nicorin Type Bottle
Mould Size: 296X196X205, Mould Weight: 96 KGS, No. Of
Cavities: 4, Material of Mould: H-13, Hardness HRC:
45 TO 48
Cycle Time: 20 Sec, Product Weight: 6 grams, Product
Material: PP, Residual Life of Mould: 3 Million Shot,
Status: Ready
Nicorin Type Pug
Mould Size: 196X196X202, Mould Weight: 67, KGS No. Of
Cavities: 4, Material of Mould: H-13, Hardness HRC:
45 TO 48
Cycle Time: 15 Sec , Product Weight: 1 grams, Product
Material: LDPE, Residual Life of Mould: 3 Million Shot,
Status: Ready |
Mould Set for 2 ml Syringes
Barrel Mould:
Mould Size :2ml Barrel 346 X 396 X 258
No. of Cavity : 24, Material of Mould : STAVAX, Hardness
HRC : 45 TO 48, Cycle Time : 19 Sec, Product wt :1.2
grams, Product Material : PP, Residual Life of Mould
: 4 Million Shot
Plunger Mould
Mould Size wt [Approx] : 2ml Plunger 446 X 446 X 220,
No.of Cavity : 24, Material of Mould : STAVAX, Hardness
HRC : 45 TO 48, Cycle Time :15 Sec, Product wt:0.95GMS,
Product Material : HDPE, Residual Life of Mould : 4
Million Shot
|
10
ml 2 Part Syringes Mould Set
Barrel Mould:
Mould Size : 10ml Barrel, No. of Cavity : 24, Material
of Mould : STAVAX, Hardness HRC : 45 TO 48, Cycle Time
: 20 Sec, Product W/T :3.2 grams, Product Material :
PP, Residual Life of Mould : 4 Million Shot, Status
: Under Manufacturing Delivery 40 days from the date
of advance
Plunger Mould
Mould Size W/T [Approx] : 10ml Plunger 446 X 446 X 250,
No.of Cavity : 16, Material of Mould : STAVAX, Hardness
HRC : 45 TO 48, Cycle Time :16 Sec, Product wt :205
grams, Product Material : HDPE , Residual Life of Mould
: 4 Million Shot
Status : Under Manufacturing Delivery 40 days from the
date of advance
|
Mould
for I.V. Dripper Set
We offer complete set of 4 moulds
Needle Adaptor
Mould Size 316X296X208, Mould Weight: 150 Kgs, Cavities:
32, Material of Mould: STAVAX, Hardness HRC: 45 TO 48,
Cycle Time: 22 Sec, Product W/T: 0.4 gms, Product Material:
PP, Expected Life of Mould : 3 Million Shot, Status
: Ready, Un Used
Drip Chamber
Mould Size: 396 X 370 X 263 , Mould Weight: 300 Kgs,
No.of Cavity : 32, Material of Mould : STAVAX, Hardness
HRC : 45 TO 48, Cycle Time :24 Sec, Product W/T :3.3
grams, Product Material : Soft PVC, Residual Life of
Mould : 3 Million Shot
Status : Ready, Un Used
Spike
Mould Size: 396 X 370 X 260, Mould Weight :
300 Kgs, No.of Cavity : 32, Material of Mould : STAVAX,
Hardness HRC : 45 TO 48
Cycle Time :25 Sec, Product W/T :2.3 grams, Product
Material : ABS, Residual Life of Mould : 3 Million Shot
Status : Ready, Un Used
Spike Cover
Mould Size: 446 X 370 X 262, Mould Weight: 340 Kgs,
No.of Cavity: 64, Material of Mould : STAVAX, Hardness
HRC : 45 TO 48, Cycle Time :35 Sec, Product W/T :0.5
grams, Product Material : LDPE, Residual Life of Mould
: 3 Million Shot, Status : Ready, Un Used
|
Barrel
and Plunger Mould for 2 Part 5 ml Syringe
Barrel Mould
Mould Size :5ml Barrel 346 X 496 X 270, NO. of Cavity
: 32, Material of Mould : STAVAX, Hardness HRC : 45
TO 48, Cycle Time : 20 Sec, Product W/T : 2.1 grams,
Product Material : PP, Residual Life of Mould : 4 Million
Shot, Status : Ready, Under Use
Plunger Mould
Mould Size W/T [Approx] : 5ml Plunger 446X446X220, No.of
Cavity : 24, Material of Mould : STAVAX, Hardness HRC
: 45 TO 48
Cycle Time :16 Sec, Product W/T :1.8 grams, Product
Material : HDPE, Residual Life of Mould : 4 Million
Shot
Status : Ready, Under Use |
For
All Above Molds, contact
Gujarat
Toolroom Ltd, India, Mr. Suresh Jain,
Mobile No.: +91 9825414699 Telephone No.: +91 79 25830117
/ 25896949, Email Id: kinariwala@icenet.net |
| PLACEMENT
SERVICES |
| JOB
OPENINGS: OVERSEAS |
| Company
Profile: Innova is the leading Woven Fabric
manufacturer in Ethiopia. We have 3 plants viz; PP woven
Sacks plant supplied by Starlinger with capacity of 30
million bags / annum, PE carry
bags & liner plant supplied by Hyplas with a capacity
of 1500 MT/ annum & a waste recycle plant with a capacity
of 350
MT/ annum for captive use. We require
the following |
| Maintenance
Manager |
| Assistant
Production Manager |
| Marketing
Executive |
| Electrical
/ Electronics Maintenance Engineers |
| Import
/ Export Executive |
| Accounts
& Audit Executive |
| Financial
Controller |
Job
Location : Ethiopia
Besides Salary Company shall provide:
* Independent Accommodation
* Company gives out-of-pocket expenses which are generally
sufficent if there is no extravagant habit
* General Medicines are given free of cost. Medical
expenses does not include serious or chronic ailments
and surgery
* 4 Weeks leave every years for managerial level with
free economy class return ticket to Mumbai or Delhi.
* Company runs an Indian kitchen, laundry and house
keeping service
* Company provides recreational facility like Dish TV
* Salary is payable in local currency and transferable
to India. Income Tax is company liability
Contact Person: Mr. Kashan
K. Ghaswala Tel No: India: +91-9821413234, +91-22- 22615515
/ 22701033 Ethiopia: +2519-11- 406604, +2519 - 650497,
Email Id: info@ikanimpex.com, kashan@inova-plc.com |
| JOB
OPENINGS IN INDIA |
Marketing
& Sales Executive
The candidate should have 3 to 5 years of experience in
handling Plastic Moulders, Automotive OEMs
.Job Profile: * Identification of thermoplastic compounds
application for various industries. (Specially Automotive)
* Working with Plastic Moulders * Demand Generation...Followup
with customers.
Salary: Negotiable (At par with Industry).
Minimum Education : Specialised in Plastics Technology
& Processing (Injection Moulding).
Company Profile : Indore Composite Pvt. Ltd We are a professionally
managed company engaged in manufacturing of products (Strength
Members, Yarn, Tapes) for Fiber optic cables and currently
export 50% of our capacity to countries like North America,
Europe, Russia, Africa and Asia. We have plants in Vapi,
Nashik, Pithampur. Our group turnover is nearly 200 Crores.
The Company is now setting up a new state of art project
for manufacturing engineering thermoplastic compounds
with foreign collaboration. The plant is expected to be
operation in next 6 months.
Contact Person:
Mr. NIKHIL JAIN Tel : ++91 22-22090333 Fax: ++91-22-
22088988 Email Id: njain@indore.co.in
|
|
Sales
Executives
The Candidate should have an experience in selling Engineering
plastics, Raw Material and Compounded Plastic. He need
to have excellent rapport with Injection Moulders & Automotive
Vendors. He should have minimum 3 years of Experience
Openings are available at Bangalore - 2 positions, Chennai
- 1 position, Pune - 1 position.
Minimum Education : Diploma.
Company Profile : Shah Polymers are very well established
polymer trading group based in southern and western India
We are distributors & agents for LG – Chem Korea, Reliance
Industries Ltd & KEPITAL We have offices in major towns
in Southern and Western India.
Please Contact:
Mr. Deepak Shah Mobile No: 09845050280 Email Id: deepak@shahpolymers.com
Mr. Latha Tel No: 080- 23608924 Email Id: business@shahpolymers.com |
We
are one of the leading manufacturing of HDPE / PP Fabrics
& Woven sacks, tarpaulin, FIBC jumbo bags, Multi-layer
films, garbage bag. We are working on mega project started
by group nearly six months ago with installed capacity
of 2000 MT per month. We require at Gujarat
Plant
Manager / Incharge
The candidate should have good experience in Woven Sack
preferably on LOHIA Plants, with 15 years Work Experience |
| Twelve
job openings for Eight shuttle loom Operators
making fabric for Jumbo Bags |
| Two
job openings for Loom Supervisors |
| Loom
Shift Incharge |
| Finishing
Supervisor for Production of Woven Bags |
Winder
man
The Candidate should have an experience of Woven Sack
Industry for atleast 2 yearSix job openings are available
for Winder man
Minimum Education : CIPET Graduate, BSc Can do with good
experience , Work Experience : 4 Years |
Two
job openings for Lamination operator
with 2-4 years Two job openings, Minimum Education: CIPET
Graduate, BSc can do with good experience
Work Experience : 4 Years |
SIX
job openings Quality Supervisor in Woven
Sack Industry
Minimum Education : CIPET Graduate, BSc can do with good
experience , Work Experience : 4 Years |
Polymer
Technologist for Multilayer film structure designing
and Quality.
The candidate should have two to four years of experience
in the same field
Minimum Education : B. Sc Chemistry with a good experience,
Work Experience : 4 Years |
|
Job
Openings at Prince SWR Systems Pvt. Ltd
Contact Shashank Chaturvedi, Email Id: info@princeswr.com,
chaturvedi@princeswr.com |
|
|
Maintenance
Engineer
3 to 7 years of Experience (Preferably from Plastic Industry),
He
should have skills of
Maintenance of utilities like Compressors, Chillers, DG,
Transformer, Computer Literacy. Job Location: Silvassa |
|
| JOB
NEED |
|
|
|
|
|
|
Production
- Extrusion
Education: Pursuing MBA From ICFAI University. PG Diploma
in Plastic Processing and Testing Technology from CIPET,
Chennai.
Presently working at a leading manufacturer of PP/HDPE
woven fabric and bags for packing of cement, fertilizer,
sugar, food grains, salts, chemicals, pesticides, flour.
Designation: System Head with 1.5 Years. |
Production
- Extrusion
Education: B.E (Mechanical) from Kopargaon – Pune University
in the year 2004 with 58%.
Presently working at a manufacturer of Polyester Film.,
Designation: Mechanical Engineer. |
Production - Extrusion
Education: Post Graduate Diploma in Plastics Processing
Technology from CIPET Lucknow.
Presently working at a leading manufacturer and exporter
of DOP/ DBP/ CPW/ PVC Compound,
Designation: Production Supervisor for 7 Years. |
Production
- Moulding
Education: Pursuing PGD-PPT from CIPET Amritsar.
Presently working at one of the Indias dynamic, fast growing
conglomerates, Designation: Shift In-charge.
|
Production - Moulding
Education: Diploma in Mechanical Engineer from Tirupati
with 70% n the year March-2002.
Presently working at one of the largest tractor manufacturers
in India as Junior Engineer.
Duration: June 2005 to October 2005 . |
Quality
Education: M. Sc. in Polymer Science from Bundelkhand
University, Jhansi (U.P.) with 70.5.
Presently working at a leading manufacturer of Acrylic
fiber in Tow, Top & Cut Length as Trainee in R& D cum
Quality Management.
|
|
|
Sales and Services - Raw Materials
Education: M. B. A. (Marketing) from Osmania University,
Hyderabad in the year 1991 - 1993.
Presently working at a leading Thermoplastic Compounder
in India, Designation: Branch Manager – Marketing.
|
| Candidates
with less than one year experience |
|
Post Graduate Diploma in Plastic Processing Testing from
CIPET. |
|
B.Tech (Polymer Technology) from Anna University, Chennai
in the year 2004-05 with 72%. |
|
B.Tech.(CH) from F.E.T. R.B.S. College Agra (A Premier
Institute of U.P. affiliated to Uttar pradesh Technical
University) in 2005 with aggregate 67%. |
|
Diploma in Plastics Mould Technology from CIPET, Bhopal
in the year 2002-2005 |
| BACK
TO NEWSLETTER |
