Click on Enquiry to View Details
URGENT REQUIREMENTS
Kolsite Twin Screw PVC Pipe Plant
Output should be in the range of 250 to 300 kg/hr.
Present Condition: Should be in working condition
HDPE Pipe Plant to produce pipe from 90mm to 400mm OD.
Maximum output 300 kg hour. The machine should not be more than 4 years old.
Manufacturer: Kolsite
Location: Chile
Reprocessed HDPE
We are looking for regular supply of these items in South India
Reprocessed LDPE/ LLDPE
We are looking for regular supply of these items in South India
Reprocessed PP
We are looking for regular supply of these items in South India
Transparent Release Film
The film which should be easily releasable when stuck on Adhesive Foam tape. Thickness of film 75 micron 20,000 Sq Ft per month
1100 to 1300 Tons Injection Moulding Machine
Tie Bar Distance : 1150 mm, 6 Kg Shot Unit, Ram Locking
100-125 Tons Ram Type Injection Machine
With micro processor.
Preferred brands are Cincinnati, L&T Demag, L&T demag with Toggle locking is acceptable
USED MACHINERY AVAILABLE
Windsor, 3 Layer Film Plant - 150 kgs
Windsor - 2000 Model, 150 kg / hr guaranteed output, 3 x 50 mm extruder
Twin Screw Rigid PVC Pipe Plant
Kabra Extrusiontech, purchased in the year 1992, Model 52/6V,
80 kgs output per hour, Along with this one 50 mm Die and a spare Screw
Present Condition: Excellent working condition
KET 100kg/hr PVC PIPE Extrusion line
 Complete extrusion line with original KET post extrusion equipment including Vaccum Tank.
Haul off unit and Tilting unit. KET- 52 X 18V 1997 Model.
Present Condition: Excellent working condition

PVC PIPE Extrusion Line
Extruder - KET Make 52 x 18V, Diehead - 75mm, Output - 100kg /hour.
Manufacturer: Kolsite, Year Of Manufactur: 1994
Present Condition: Excellent working condition
SP 130 ton Injection Moulding Machine
Reconditioned Windsor machines.
Machine Wiring, Hydraulics, Heaters, Screw Barrels, Paint will be overhauled, Oil seals, Packing will be replaced as required.
Present Condition: Completely Reconditioned
6 Colour Flexo Printing Machine
Width: 1200mm, 7 set repeat cylinders, Web guiding system
All A. C. Drive & A. C. Motors- ABB make, Unwind with Hydraulic Anilox Rollers.
The machine was purchased end of 2003, has been used only for 3 months.
SEMI FINISHED PRODUCTS
PLACEMENT SERVICES
Job Openings
Production Manager
We are one of the leading manufacturer of cable reinforcements for the telecom cables in Asia with its ISO 9001: 2000 certified plant, India.
6-8 year experience in Extrusion and Injection Molding
Location: Mumbai, India
Technical Service Engineer
We are the largest manufacturer of cable reinforcements for the telecom cables in Asia with its ISO 9001: 2000 certified plant, India.
Experience with Injection Molding of running various material especially PP and Nylon with 3-4 years of experience in the same field.
Location: Mumbai, India
Application Development Engineer
We are the largest manufacturer of cable reinforcements for the telecom cables in Asia with its ISO 9001: 2000 certified plant, India. The candidate must have 3-4 years experience in Marketing or Application Development
Location: Mumbai India
Candidates Available
Candidates with less than one year experience
B.Tech, Polymer Technology (2001-2005), Kamaraj College of Engineering and Technology, Virudhunagar. Percentage: 75.46%
Bachelor of (Chemical Technology) from Polymer (Plastic) Technology. Department of Polymer Technology. College of Engineering Technology, Akola. (Amravati University) Year of Passing: 2004, Aggregate Percentage: 75.92%
Work Exp: Working as Research and Development Engineer from March 2005 Till Date with an ISO 9001:2000 certified manufacturing products such as casseroles, tiffins, water jugs, water bottles, soft line products, etc.
B. Tech Polymer Technology Kamaraj College of Engineering and Technology Virudhunagar.
BACK TO NEWSLETTER