Click on Enquiry to View Details
URGENT REQUIREMENTS
Injection Moulding Machine 50 tons and 100 ton, should be microprocessor controlled, Maximum machine age should be 6 years.
Less than 1/2 Liter Blow Moulding Machine
Should have micro processor control, Maximum Age - 6 Years.
2 machines: 700 to 1000 Ton Ram Type Molding Machine, for houseware and furniture moulding
Machine is to be delivered in complete overhauled condition.
Any reputed European and Japanese Make only
Calender Line
With Inverted L Roll, Individual Drive, 60" minimum width, to manufacture Stationery, clear sheets
Used Blow Moulding Machine
to produce gasoline tanks with approx capacity 50-70 litres, in a good working condition
BOPP Release film- 40 microns films used for the Laminates while pressing, 1500 kgs per month.
RAW MATERIALS FOR SALE
Reprocessed LDPE
LDPE film grade granules black from Agri Film scrap, @USD$650/MT CNF Mumbai .....
LDPE agri film's granules clear (not very bright but dull) @USD$750/MT CNF Mumbai....
Post Industrial LDPE film's granules in black color, @USD$800/MT CNF Mumbai.....
USED MACHINERY For SALE

Used Calender Line for PVC Films
Manufacturer: Comerio Ercole
Type: reversed L 4 - rolls calander for soft and rigid PVC films
Diameter of rolls: 700 mm, Working Length: 1800 mm, Speed: 60 m/s
Line includes Two Roll Mill (diameter of 700 mm - width of 2200 mm), Planetary extruder manufactured by BKK......

300 tons Nigata Injection Moulding Machine
Manufactured in August 1996.
Hydraulic core puller, Air ejection, Medium size Barrel, Toggle Type, Tie bar distance 660x 660.
Used to run commodity plastics like PP & PS. Shot Volume 1225 cc, Maximum Mold Height -- 750 mm...
Used Extrusion HDPE Pipe Line
3-1/2" 24/1 Welex Model 350-24-RHNV Extruder having a 4 Zone Electrically
Heated, Air Cooled, Non-Vented Barrel. Gearbox is driven by a 75 HP Dc motor with Scr Control.
Integral Panel has 9 Zones of Temperature Controllers......
Used Extrusion Pipe Line
Sterling/Welex (2) Coex Straw Lines For Striped Straws.
Lines consists of 2.5"Primary Extruder, Either Sterling Or Welex, Driven By 40 Hp Dc Motor With Scr Controller.......

PP Film Plant
Model - Windsor PP 500 Machine, 10 years old.
Screw Barrel changed 5 years ago. Can start and give demo as the machine is fully functional.....
6 Colour Rotogravure Printing Machine
Max Printing Width: 700mm. Roller Width: 762mm, reverse printing.
Auto Color Register, Nireco: MR500 (6yr), Low material waste....

Used Reprocessing Extrusion System
Boolani Make, Screw Diameter - 75 mm L/D Ratio - 20:1 Drive - 20 HP Control Panel,
 Water Trough, Aluminium Cutter,- DC Controlled 2 HP Grinder.....
Plastic Sheet Web Aligner
Pneumo-Hydraulic Size - 40 X 100 X 16, Width of Film - 500 mm
Stainless Steel Jacketed Ribbon Mixer
Length-1000 mm, Width - 650 mm, Volume - 340 Liters, Mixing Capacity - 150 Kg per hr......
Used Blow Moulding Kautex KB 250
Year of Manufacture: 1993 Kautex KB 250.01-2 S100/25
Accumulator Head Blowmoulding machines, Extruders adjust up and down.....
SEMI FINISHED PRODUCTS
PP Woven Sacks & Bags PTFE O Rings PTFE Hoses PTFE Bearing Strip PTFE Gaskets PTFE for Clothes Iron Glass-fibre filled PTFE bearing strip Polyamide Rod Polyacteal Rods Pure PTFE Bellows PTFE Sheating Carbon filled PTFE segments & felts Bronze Filled PTFE Segments & Felt Glass-fibre filled PTFE fabric
Polyacetal Sheets
-Dimensional resitance
-High resistance against loads and impact
-Perfect wear and tear resistance
-High mechanical strength and inflexibility
-High elasticity
-Acting as a bearing in environments without grease
-Good level of electricity and insulation properties
-Low absorption (water absorption)
-Resistance against heat(-50° C-, +110° C, 150° in short term).
Cast Polyamide Rods , used in Skids, Wheels, rolls, gears, bearings, reels, hoops, wearing plates, parts for food articles, chemistry, textile and printing industries
With high mechanical, Physical, Electrical and chemical resistance. It is especially resistant against loads, impact and fatigue. It is not recommended for use in humid environments as it is known to absorb water. Propertise
Use temperature of 100° C.
Low Cofficient of friction
Veriy high press resistance, high hardness
High impact resistance
Heat resistance
Chemical Substance Resistance
Less water absorbtion when compared to Nylon 6
Polyamide Wedge Used in Skids, Wheels, rolls, gears, bearings, reels, hoops, wearing plates, parts for food articles, chemistry, textile and printing industries
With a high mechanical, Physical, Electrical and chemical resistance. It is especially resistant against loads, impact and fatigue. It is not recommended for use in humid environments as it is known to absorb water. Propertise:
Use temperature of 100° C.
Low Cofficient of friction, Veriy high press resistance, high hardness
High impact resistance -Heat resistance, Chemical Substance Resistance
Less water absorbtion when compared to Nylon 6
PROCESSING MACHINERY
300 ml Taiwanese Blow Moulding Machine
Screw Diameter-40 mm
L/D - 1:22
Driving Motor - VS 3 HP
Max Extruder Capacity/per hour - 15 kg
Heating Zone (Barrel) - 2 point
Heating Capacity (Barrel) - 2.7 kw .....
PLACEMENT SERVICES
Candidates Available
Production
PGD-PPT from CIPET, 1994 - 1995
Working as Production Supervisor in leading ISO 9002 certified Manufacturer of UPVC, CPVC High Pressure Pipe Fittings (as per DIN 8063 and BS 4346) standards, Drainage fittings and Compression fittings, Crates and Furnitures in the UAE. Department: Injection Moulding Duration: January 2002 till date
Candidates with less than one year experience
Education: B.Tech. (Polymer) from Amravati University with 70.54% in the year 2005
Post Diploma in Plastics Mould Designing (CIPET, MYSORE). Diploma in Tool & Die Making (Govt Polytechnic, Kunnamkulam)
B-Tech Polymer Technology, Amrita Institute of Technology University, 2001-2005, with 72%
BACK TO NEWSLETTER