For Sale - UM - 20067 - 400 MM Double Wall Corrugated Pipe Extrusion Line

Specification

Reference Numbers

UM - 20067

Product

400 MM Double Wall Corrugated Pipe Extrusion Line

Location

India

Product Details

MODEL HDPE 150 - 600 mm
DWC pipe extrusion line (including 150-400mm mold)

Customer need as low as possible weight per meter for each size, but the pipe will also pass the test as per India standard. Reduce the wave of pipe

Stacker will require weighting system

Pipe Diameter List:
Application: Water drainage
Pipe length: 6m
Recommended raw material: new material for PE double wall corrugated pipe;
Color: Outer layer is black, inner layer is blue;
Pipe list and pressure grade: pipe section drawing according to Jwell standard; belling on-line;

Main Technical performance
1. Material:PE

Output:
Extruder:- JWS90/33
Material:- PE
Output:- 400-500kg/h

Extruder:- JWS75/33
Material:- PE
Output:- 200-300kg/h

The output capacity varies with the materials and the operation conditions.
2. Line speed:0.3~3.5m/min°according to the thickness and operation condition)
3. Operation direction:From right to Left°
4. The color of the line:JWELL According to JWELL’s standard.
5. JWELL remains the right
to improve the specification of the line

Automatic feeder and drier
feeding type vacuum suction method
Drying type Automatic hot wind

Extruder
Type JWS90×33

Screw:-
Diameter 90mm
L/D 33:1
Material 38CrMoAlA
Treatment Nitrided treatment

Barrel
Material 38CrMoAlA
Treatment Nitrided
Heating control zones 6
Heating power 8KW×5
Cooling system By blower fan
Cooling power 0.55KW×5

Gearbox
Material of the house QT200
Gear type Helical gears
Material of the gear 20CrMnTi
Heat treatment of the gear surface:- Quenching
Bearings Chinese famous bearing
Lubricating system Press system
Cooling System Equipped with separate Cooling System

Feeding block
Method Water circled cooling system
Material Q235

Driving motor
Method AC motor
Power 160KW
Inverter ABB

Type JWS75×33

Screw
Diameter 75mm
L/D 33:1
Material 38CrMoAlA
Treatment Nitrided

Barrel
Material 38CrMoAlA
Treatment Nitrided
Heating control zones 5
Heating power 7KW×5
Cooling system By blower fan
Cooling power 0.25KW×5

Gearbox
Material of the house QT200
Gear type Helical gears
Material of the gear 20CrMnTi
Heat treatment of the gear surface:- Quenching
Bearings Chinese famous bearing
Lubricating system Press system
Cooling System Equipped with separate Cooling System

Feeding block
Method Water circled cooling system
Material Q235

Driving motor
Method AC motor
Power 110KW
Inverter ABB

Method:- Spiral, mouth die and core die are changeable
Material:- 40Cr, 40CrMo and 38CrMoAlA
Heater:- Die adopt ceramic and casting aluminum
heater, mica heater for mouth die.
Heating Power:- Max 74.5KW
Calibration Unit The material of sizing unit is high-quality
wearing resistance copper
Mould block AL
Quantity of blocks 32 pairs

Structure:- Vertical
Corrugators up/down moving motor 1.5 KW
Vacuum section (22KW/37KW) 4 section, 22KW / 37KW
Guide track 38CrMoAlA The material is 38CrMoAlA
Block seat Material is 40Cr, nitrided
Back/Forward Track Track used Imported bearing
Hydraulic system oil pump: 1.1KW
Corrugators motor DC 11KW
Corrugators gear box Good quality gear box
Corrugators cooling Block is cooled by air, 0.55KW x 6 set cooling fan
With air cooling system
Water pump 4KW * 1set
The material of the tank:- Parts touched with water are made of stainless
steel andsliding window
Cooling fan Fan motor with 2.2KW


Haul-off unit
Tire quantity 4 sets
Clamping type Pneumatic clamp

Cutter
Cutting method Hydraulic control
Pressing method Pneumatic pressing
Moving method of the platform pneumatic system
Cutting range According to the pipe list
Cutting motor 3KW
Rotation Motor 1.5KW
cutting length control photoelectric switch
Type Steel framed
Length 6000mm