UM - 21792
Three Layer Rajoo Co-Extrusion Blown Film Line
Year Of Manufacture
Plant was shut down in running condition in january 2021. Since then is sitting idle
HDPE Or BLENDS of either of these finished Product : Wound Rolls of Flattened Film
Line Dimension LxWxH mm 9000 x 6000 x 10000 350mm diameter die lip.
Two: 50mm / 30D / 30 kW grooved feed barrier screw extruder
One: 60mm / 30D / 45 kW grooved feed barrier screw extruder
Three: Lever type single action manual screen changer
One:Die carriage & die-head with one die
One:Dual flow air ring with blower
One:CKD type tower with two walk-around platforms
One:Oscillating take-off unit
One:Dual station surface winder
One:Process control panel SALIENT FEATURES OF THE LINE A. S
Screw Diameter mm 50 x 2, 60 x 1 B.
Screw Length D 30 C.
Standard Die Diameter mm 350-1.2 & 2.0 gap D.
Lay flat Width Range mm 750-1500 E.
Film Thickness Range micron 25-100
Maximum output kg/hr 250
Line Speed mts/min 7-70
Total Installed load KW 186.48*