For Sale - UM - 18419 - Husky 90 Ton Hycap Hydroelectric Machine

Specification

Reference Numbers

UM - 18419

Product

Husky 90 Ton Hycap Hydroelectric Machine

Location

India

Product Details

Model:- H90 RS45/42
Weight:- 5900 kg (13000 lb)
Hyd Oil Capacity:- 360 ltrs
Gear Box Oil :- 12 ltrs
Working hours:- 7235.09

Technical Details
Injection unit
Screw diameter:- 42 mm
Metering:- 210 mm
Screw speed:- 364 U/min
Screw L/D ratio:- 25.0/1 L/D
Injection capacity:- 291 cm3
Max.Injection pressure:- 200 bar

Clamping Unit
Tie Bar Distance:- 450 X 450 mm
Mold height:- 510 mm
Mold Traveling:- 200-500 mm
Ejector stroke:- 120 mm
Clamping:- 90 ton

Further information
Accumulator:- 2 X 20 ltrs
Drive motor:- 75 Amp
Heat Load:- 21 Amp
Hot runner Load max:- 30 Amp

2.Husky Hot runner controller
Model :- GLC2I-E030W-08
Electrical cap.:- 400 v, 3-ph, 30Amp.

3.Plastic system conveyer
Make:- Plastic system
Electircal connction: 400V, 3-ph

4.Conair Loader Unit
Make:- NuVu Conair P.Ltd.
Model:- AT2-MC-0.90 kw
Connected load:-0.9kw
Elect. Connection:- 415V, 3ph, 2.40A

5.Conair Dehumidifier unit
Make:- NuVu Conair P.Ltd.
Model:- MS-1
Air flow Rate:- 400CMH
Connected load:-5.0kw
Elect. Connection:- 415V, 3ph, 8.0A

6.Conair chiller
Make:- NuVu Conair P.Ltd.
Model:- ECW 15
Cooling Capacity:- 58.1 kw (15 TR)
Connected load:-12.4kw
Elect. Connection:- 415V, 3ph, 24 A

7.Sliting & Folding M/C
Make:- Hem Automation –Mumbai
Model:- SF-400
Elect.con.:- 3 X 415 V
Conn. Load:-3.0 kw
Output :-400 cpm

8.Liner MC Technical Details
Make:- Packsys Globle Ltd.
Machine Type:- KDP 50-12
Machine Plate No.041002-19
Mfg Year:- 2002
Length:- 2210 mm
Width :- 1530 mm
Height :- 1930 mm
Gross weight :- 4000 kg
Extruder weight:-1600 kg
Tranformer weight :- 160 kg
Machine Is equipped for plastic caps dia. 28 X 19.6 mm
Liner weight:- 240mg
Production speed:- 500 cpm
Electrical connection:- 3 X 415 , 50 Hz
Connected load :- 35 kw
Air consumption:- 35 Nm3/h
Extruder Drive load :- 13.2 kw

9. Husky cap mold
Cold Half Make:- Corvaglia
Cap Type : cr-cap 103-4 for pet bottles with 28 mm PCO 1810 neck finish
Cap opening force : -10-16 in/lbs
Cap Height :-19.6 mm
Cap Dia.:-30.3 mm
Mould Height -: 546 mm
Mould Width: -450 mm
Hotrunner: -Husky injection moulding systems pvt.ltd.
Manifold Temp. :- 220 deg.
Mould Temp.( Water):- 15 deg.
Total current load : -49.2A
Cycle time :- 4.2 sec
Production Per hrs : 60kg