For Sale - UM - 17645 - CMR Lamination And Coating Machine

Specification

Reference Numbers

UM - 17645

Product

CMR Lamination And Coating Machine

Year Of Manufacture

2011

Location

Europe

Product Details

Type of lamination/coating: Solvent based, Solventless, Hotmelt
Working width (mm): 1000
Materials: Primary unwinder ;Polyester: 10- 12 my ,OPP/BOPP:
15- 25 my,MET.
Polyester: 12 -25 my,LDPE – HDPE – LLDPE : 40- 60 my,PETP :9- 30 my,
OP: 12- 18 my,
Nylon cast : 30- 80 my,PP CAST:60-150 my,Paper :40-150 g/m2,
ALU: 6,25 - 40 my,
Secondary unwinder :- BOPP :12- 80 my,PP CAST: 20-150 my ,ALU :7- 40 my,LDPE – LLDPE:
20- 200 my,NYLON CAST:20- 80 my,Polyester :10- 20 my,PETP :9- 30 my,OPA :12- 18 my,PAPER :40-150 g/m2 ,
Speed: Production speed: Solventless : 250 mts/min, Solvent base: 200 m/min, Hot melt: 100 m/min
Max diameter reel unwinder: 800
Max diameter reel unwinder: 800
Max diameter reel rewinder: 1000
Coating unit: Coating via rotogravure trolley and hot melt trolley .Coating Group (5 cylinders type)
with interchangeable coating units ( NR. 1 cylinder coating .NR. 1 cylinder CARRIER
(sleeves type) NR. 1 cylinder METERING NR. 1 cylinder metering NR. 1 cylinder
Pressure
Drying: Electric
Corona treatment :- cason
Additional informations: Suitable for Solvent Less - Solvent Base and Hot Melt processes
Primary unwinder:
Max. Reel Diameter: 800 mm
Inner core diameter: 76 – 152 mm
Secondary unwinder:
Max. Reel Diameter: 800 mm
Inner core diameter 76 – 152 mm
Rewinder:

Max. reel diameter: 1000 mm
Inner core diameter: 76- 152 mm
TENSION RANGE :
Unwinder: 3-30 Kg
Rewinder: 5-50 Kg
Coating group solventless configuration composed by 5 cylinders
drive by AC Vectorial motors
Coating grup solvent- rotogravure coating concept composed by
1 cylinder coating (anylox roll)
1 cylinder pressure roller (sleeves type) on trolley
Wax coating device, mainly composed by :
Nr. 1 Collecting tank with double chamber
Heated by thermic oil re-circulation
Up to A max. 170° constantly kept
Nr. 1 tank with double gradient t facilitate the complete discharge
FEEDING system of the tank on two ( 2 ) sides to make even the wax distribution.
Nr. 1 Metering rubber coated back cylinder
Nr. 1 AC motor to drive the metering back cylinder , with possibility
to change the speed from 10% to 50% according to the material’s range
Nr. 1 Pneumatic system to approach to the rubber coated cyclinder, with pneumatic pistons
and pressure regulators
On removable trolley
Edge guide BST type Installed on the secondary unwinder