For Sale - UM - 11140 - Cellier 3 layer BOPP Film Line

Specification

Reference Number

UM - 11140

Product

Cellier 3 layer BOPP Film Line

Location

Italy

Product Details

- Overhaul/renovation: Upgrades with new PLC System
1. Upgrade winder control unit in Jun 2000, LG Brand programmable logic controller model GLOFA GM3/4 Series. DC drive is digital.
2. Included pull roll( cooling roll) modified at year 2000, such as 4200 x 300 mm. and AC motor 3.7 KW, inverter controller
- Width (mm): 4200

Extruder 1 Description: 1 Main extruder Davis Standard
- Screw diameter 170 mm

Extruder 2 Description: 2 Satellite extruders Screw Diameter 70 mm

Head description: extrusion dies brand, Chippewa Falls, WI U.S.A - No. of Bolts = 19 set,1 Phase, 240Vac, 200W/SET - It is a manual operated . DIE Type = PERF. Metal 3",
Widex50"LG ALUM. CHANNELS 7/8"x2.1/4"x50"LG ALUM. ANGLE (saw cut)1"x3"x3.1/4"LG

Thickness controll system: Thickness gauge system, make & model. - Web gauge is
Yokokava brand, Model WG8PC2 installed in1994. - Air Knife system.

MDO description: MDO pump flow rate = 600L/Hr (hot oil.).
- Temperature = 130 c ,at Stretching = 4150 mm.
- Number of MD rolls: 14 rolls totally that devide to 4 heating zone X
- 2 rolls each, 2 stretching zone 2 olls each and 1 stabilize zone with 2 rolls

TDO description: No of Chain clip
- Both sides approx. 1042. Chain clip is 521 set (left section).
Chain clip is 521 set (right section). Bearing in each clips. No Bearing, Overhauled 3 years ago.
Good condition. - Latest overhauled at 4/11/2003 years such as clip - TDO: Devide to 8 zones
with 2.79 m long per each zone . .Returning of chain from out side of the TDO or inside the oven.
Sliding see tech. 4.1.2 - inside the oven. Chain is capable for thickness from - 12 to 40 micron.
Min. and maximum stretching width of the chain. - Min = 4000 mm. - Max = 4200 mm. Make of
TDO chain. - Cellier, France.
Corona treatment: Corona treater make, and condition - Sherman Treater 25 KV(maximum)
Pull roll unit: No. pull roll at out of TDO - It is a 1 pull rolls stand (roller at 2 set ) DC motor 16.2
KW = 1 set

Rewinder description: Cellier, France.
- Winder motor DC, 6KW x 2(core A, core B) = 1 set
Winder PLC, LG Brand programmable logic controller model GLOFA GM3/4 Series. DC drive is
digital. Trim conveying system, make, model and capacity.
- Cellier, France. Inline system.Inline
recycle system. - AC Grinder+Cutter 8.5 KW = 1 set

Slitter: Atlas 4200mm.Primary slitter is Atlas. Made in England.
- Paper core 3 inch and 6 inch.
- Min width cutting 350 mm.
- Max width cutting 2000 mm.
- Max cutting 9 Roll / Set.
- Rewinding
- roll diameter max = 1025 mm.

Additional informations: Heating capacity and heaters type.
- hot oil type .Mode of heating.
- PID controller.
- ELECTRICAL PANEL AND DC DRIVE. 1. DC drive and PLC make, model.
- PLC line BOPP, Telemecanique Brand, Electrical panel MCC and PCC included in this scope.
- Heating oil, temp, heat load of each equipment. At width 4150 mm. thickness 20 micron.
- Main Extruder= screw barrel heater 5
ZONE = adaptor heater 1 ZONE = filter heater 1 ZONE = melt pipe heater 3 ZONE - Satellite
Extruder 1 = screw barrel heater 4 ZONE = filter heater 2 ZONE = melt pipe heater 3 ZONE =
filter heater 1 ZONE = melt 1 ZONE - Satellite Extruder 2 = screw barrel 4 ZONE = filter 2 ZONE
= melt pipe 3 ZONE = melt filter 1 ZONE = melt 1 ZONE - DIE = Heater 5 ZONE - MDO =Hot oil
7 ZONE- TDO =Electrical heater 8 ZONE

Thickness range 12 micron - 40 micron, Final jumbo width at 4200 mm. The design capacity of
plant at 20 micron basis. - The plant capacity at 20 micron basis is 10.8 tons / day.