For Sale - UM - 12421 - Bruckner 3 Layer BOPP Line

Specification

Reference Number

UM - 12421

Product

Bruckner 3 Layer BOPP Line

Year Of Manufacture

1986

Present Condition

In production

Location

Middle East

Product Details

- Year of operation: 1990
- Capacity ( t/a).: 4800 t/year
- Max. output: 600 kg/hr
- Max. speed ( m/min): design 160 m/min
- In production: 150 m/min.
- Final film width: 4800 mm. divided to 3 separate winders with working width of 2200 mm.
- Film thickness range: 20 - 35 micron .
Produced films type: Transparent films.
- Machine descriptions:
Main extruder: barmage, DC drive, L/D=33
Metering pump: barmage make, DC drive.
Main filtter: LLF-12, Barmage make, with serface area 1.2 m2. With its oil heating system + 1 stand by electrical heating station& 1 spare filter.
Co-extruders:
2 co extruders with max. output =45 kg/hr., Dc drive , included with double filters with surface area = 100 cm2/unit.
Flat Die: simplace make, 3 layers, slot opening =750 mm.
Casting unit: Include chill roll + air knife + film & chill roll draying + water bath.
MDO (machine direction orienting unit) bruckner make : 8 pre heating rolls, 6 drawing rolls, 2 annealing rolls & 3 nip rolls, tension control at inlet ang out let,
-Oil heating system for the rolls including pumps, control valves, ..etc.
- Dc drive, stretching value up to 5 times.
TDO (Transfer direction orientation), Bruckner make
Chain and chain track model: FOK 4 - 4 - 1.
Heating system: Circulating oil via individual heating system / zone (heat exchanger, fans, control valves … etc).
Edge guide system at inlet
Mechanical speed = 170 m/min, production speedup to 150 m/min
Dc drive
PRS with edge trim on line recycling unit and 2 corona treatment stations.
Dc drive
Corona power = 50 kw / station .
Winders:
Working width = 4800 mm divided to 3 separate winders with max. working width 2200 mm.
Core: Steel cores with max. diameter = 750 mm with film.
AC & PLC:
Fully integrated system PLC step 5 with monitors… etc.
- Thickness gauge:
For cast film, FAG system, out of operation.
For final film: scantech - SIG 214
- Material feeding equipments:
Feeding trench, conveying fan, daily silo, volumetric dosing unit for main extruder
- Edge trim recycling:
Edge trim grinder, conveying fans