Forgot password?Register for an account?
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
For Sale - Used Plastic Grinders, Used Ganulators and Second Hand Crushers
1) Rapid Kurf 205 edge trim granulator with powered nip feed rolls for side trim granulation 2) 660 x 350 mm Cumberland Model: 6/84 Granulator 15 KW AC motor. 3) 900 x 450 mm Cumber......
UM 7972
Model: 50B - 75 KW AC motor - Throat 1270 mm x 510 mm - Potential throughput over 1000 kg/hr. - Sheet nip feed (For images, please see next pages)...
UM 7971
Used Rotogran 22" x 24" 50 hp granulator, - Includes blower for pneumatic discharge but no cyclone. - Open rotor design with 6 fly and 4 bed blades. - Unit completely reconditioned ......
UM 5254
- Year of manufacture: 2002...
UM 7847
400 mm blade Grinder Model: PCH-400 - Year of Purchase: May 2000 400 mm blade Grinder Model: PCH-400 - Year of Purchase: December 2000 400 mm blade Grinder Model: PCH-400 - Ye......
UM 7746
- Infeed: Conveyor - Cutting Chamber: 30" x 72" - Rotor: 9 Knife Staggered - Bed knives: D2 - Screen: 3/8" Diameter Holes w/Hydraulically Operated Screen Cradle - Base: Leg - Disch......
UM 7870
- Infeed: Insulated Tray Feed - Cutting chamber: 12" x 29.5" - Rotor: 2 Knife Open - Bed knives: D2 - Screen: 5/16" Diameter - Base: Casters - Discharge: 1.5 HP Rear Mount Blower w/......
UM 7718
One (1) used Cumberland Granulator Model: 50H, 20" x 50" feed opening - 18 blade solid helical rotor - With feed hopper - 200 hp - 440 volt - 1185 rpm motor - With 48" wide x 23' l......
UM 7570
One (1) used Battenfeld caterpiller dual belt puller saw combination Model: DESC125R - 5" wide x 70" long contact dual belt puller section - With saw attachment (For images, please ......
UM 7381
Model: LP-400 - Feed throat opening top: 16" x 18" - Feed throat opening front: 8" x 15 1/2 - Cutting chamber: 10" x 15" - Cutting circle: 8" - Average through put: 250-500 lb per ho......
UM 2842
Used 72" Wysong - Model: 1472P shear - Was in production cutting 0.250" ABS (For images, please see next pages) ...
UM 7118
Model: C1400 - Grinder is equipped with a high shear - Chevron design - 3 Knife open rotor with 18" cutting circle and 160 mm OD bearings - Belt driven by 150 HP motor & motor starter......
UM 6948
- Has 34" stroke - Includes hydraulic pumping system - Includes feed conveyor with work height of approximately 36" (For images, please see next pages) ...
UM 6947
Model: 4590 - Nip Roll Infeed 1997. - 900 X 450 mm Throat - Soundproofed. - Motorised Nip Infeed. - Circa 45 KW Motor - Panel...
UM 6940
Model: B50 - Hopper opening 3000 mm x 700 mm - 75 kw motor - New screens fitted. - They are in two halves 10 mm in size, but other sizes are available if required. - A lot of m......
UM 6923
- In-feed: Tray feed - Cutting chamber: 14" x 16" - Rotor: 3 Knife open chevron cut - Bed knives: D2 - Screen: 5/16" Diameter - Base: Casters - Discharge: Internal blower w/6" outl......
UM 6802
Model # MS 1500 - 1500 mm x 1500 mm throat - The motor is 575 volt, 60 hertz, 3 phase, 75 hp Canadian voltage. - 10 hp hydraulic power pack - Hydraulic ram - (2) stationary blades lo......
UM 6523
- 18" x 28" hopper opening - (6) rotating blades - (4) stationary blades - 75 hp, 575 volt motor - 5 hp blower/cyclone & gaylord stand - Infeed conveyor - Hydraulic gaylord dumper ......
UM 6527
- 15" x 34" feed throat opening - 20" x 35" hopper opening - (3) rotating blades - (2) stationary blades - Solid rotor - 3/8" Screen - 100 hp, 575 volt motor - 5 hp blower/cyclone ......
UM 6526
Used Previero model PR-812 film shredder. - Has 33" x 49" feed opening, hydraulically driven by a 126 kw hydraulic pumping system. - Includes operator control panel with automatic rever......
UM 2288
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
Mobile Number Required.
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long, and may consist of hyphen (-), underscores (_), dot (.), and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
Friend's Email Id Required.
Friend's Email Id Not Valid.
