For Sale - UM - 25166 - Engel 3200 Ton Injection Moulding Machine
Specification
Reference Number
UM - 25166Product
Engel 3200 Ton Injection Moulding MachineLocation
EuropeProduct Details
Screw Diameter: 135/150/160 mm
Screw Stroke: 720 mm
Max. Injection Capacity: 10310/12720/14480 cm³
Screw Speed: 85
L/D Ratio (3-zone screw): 22
Recovery Rate (3-zone screw): 139/181/200 g/sec
L/D Ratio (Barrier Screw): 22
Recovery Rate (Barrier Screw): 182/237/279 g/sec
Injection Rate (Barrier Screw): 1445/1785/2030 cm³/sec
Injection Rate (Regenerative): 1704/1410/1240 cm³/sec
Injection Pressure (Max): 2250/1820/1600 bar
Ejector Stroke + Nozzle Contact Pressure: 1100-210 mm
Heating Wattage: 109/118/133 kW
Heating Zones (Incl. Nozzle): 7
Clamping Unit
Clamping Force: 20000 kN
Opening Stroke: 3000 mm
Mold Height Min-Max: 800-1800 mm
Total Daylight Max: 3800 mm
Platen Size (Standard H x V): 2700 x 2430 mm
Enlarged Platen (Wide Platen) H x V: 2000 x 1600 mm
Dist. Between Tie Bars (H x V): 62000 mm
Drop Out Chute Width: 10 x 30 mm
Mold Weight Max A/B: 400 - 385 mm
Number of Mold Cooling Circuits: 5.5 - 1400 # x L/min
Drive
Rated Drive Power: 225 kW
Oil Reservoir Capacity: 3000 l
Weight and Dimensions
Net Weight (Approx.): 96/29
Injection Unit Length x Width x Height: 14.4 x 4.3 x 3.5 m
Screw Stroke: 720 mm
Max. Injection Capacity: 10310/12720/14480 cm³
Screw Speed: 85
L/D Ratio (3-zone screw): 22
Recovery Rate (3-zone screw): 139/181/200 g/sec
L/D Ratio (Barrier Screw): 22
Recovery Rate (Barrier Screw): 182/237/279 g/sec
Injection Rate (Barrier Screw): 1445/1785/2030 cm³/sec
Injection Rate (Regenerative): 1704/1410/1240 cm³/sec
Injection Pressure (Max): 2250/1820/1600 bar
Ejector Stroke + Nozzle Contact Pressure: 1100-210 mm
Heating Wattage: 109/118/133 kW
Heating Zones (Incl. Nozzle): 7
Clamping Unit
Clamping Force: 20000 kN
Opening Stroke: 3000 mm
Mold Height Min-Max: 800-1800 mm
Total Daylight Max: 3800 mm
Platen Size (Standard H x V): 2700 x 2430 mm
Enlarged Platen (Wide Platen) H x V: 2000 x 1600 mm
Dist. Between Tie Bars (H x V): 62000 mm
Drop Out Chute Width: 10 x 30 mm
Mold Weight Max A/B: 400 - 385 mm
Number of Mold Cooling Circuits: 5.5 - 1400 # x L/min
Drive
Rated Drive Power: 225 kW
Oil Reservoir Capacity: 3000 l
Weight and Dimensions
Net Weight (Approx.): 96/29
Injection Unit Length x Width x Height: 14.4 x 4.3 x 3.5 m
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}