For Sale - UM - 22690 - LS 2500 Ton Injection Moulding Machine
Specification
Reference Number
UM - 22690Product
LS 2500 Ton Injection Moulding MachineYear Of Manufacture
2003Location
SlovakiaProduct Details
LS LGH2500M 2500t injection molding machine (2003):
Air Valves: n/a .
Distance between tie-bars (h x v): 1.810 x 1.610 mm.
Screw diameter: 140 mm.
Shot weight max: 8.630 (PE) g.
Shot weight max: 10.880 (PS) g.
Injection rate: 1.510 cm³/s.
Injection volume: 11.820 cm³.
Screw speed: 90 / 90 / 75 rpm.
Screw L/D ratio: n/a .
Nozzle stroke / force max.: 600 mm / kN.
Nozzle stroke max: 350 mm.
Clamping force: 25.000 kN.
Mould opening stroke max: 2.700 mm.
Mould height max: 1.700 mm.
Mould height min: 900 mm.
Daylight between platens max: 3.600 mm.
Platen size (h x v): 2.480 x 2.250 mm.
Cascades / Sequential valve gates: n/a .
Heating zones: n/a .
Ejector force: 60 kN.
Control: HICOM-5000 .
Core pulls: n/a .
Oil tank capacity: 3.800 l.
Operating hours: 635 .
Power: installed max: 85 + 55 +55 +55 +11 kW.
Dimensions (long x wide x high): 13.300 x 4.300 x 3.600 mm.
Weight: 140.000 kg.
Air Valves: n/a .
Distance between tie-bars (h x v): 1.810 x 1.610 mm.
Screw diameter: 140 mm.
Shot weight max: 8.630 (PE) g.
Shot weight max: 10.880 (PS) g.
Injection rate: 1.510 cm³/s.
Injection volume: 11.820 cm³.
Screw speed: 90 / 90 / 75 rpm.
Screw L/D ratio: n/a .
Nozzle stroke / force max.: 600 mm / kN.
Nozzle stroke max: 350 mm.
Clamping force: 25.000 kN.
Mould opening stroke max: 2.700 mm.
Mould height max: 1.700 mm.
Mould height min: 900 mm.
Daylight between platens max: 3.600 mm.
Platen size (h x v): 2.480 x 2.250 mm.
Cascades / Sequential valve gates: n/a .
Heating zones: n/a .
Ejector force: 60 kN.
Control: HICOM-5000 .
Core pulls: n/a .
Oil tank capacity: 3.800 l.
Operating hours: 635 .
Power: installed max: 85 + 55 +55 +55 +11 kW.
Dimensions (long x wide x high): 13.300 x 4.300 x 3.600 mm.
Weight: 140.000 kg.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}