For Sale - AIE - 2751 - Solid Granulator
Specification
Reference Number
AIE - 2751Product
Solid GranulatorManufacturer
Ashwin EngineersProduct Details
Ashwin Make Solid Granulator is used for the grinding of rejected plastics products which are first cut in small pieces and then grinded as per mesh size. These grinded pieces can be reused for the following application.
Granulator Body
The granulator main body is fabricated from heavy MS plates and sections. The top housing for material inlet has open able arrangement with hinged type movement for ease of cleaning and for use of operator. The opening arrangement can be adjusted by bolts and nut arrangement. Rotor pulleys are covered with protection cover. Input hopper is fabricated from heavy M.S plates and is designed in way that material / parts do not come out from the hopper.
Blades
The blades are made from special alloy steel which are further hardened and grounded for the longer life. The material and design the blades are selected as per input material to be grinded. The blades are designed The blade cutting angle is preset- or factory set which ensures the positive and effective grinding of the input material.
Rotor
The rotor is made from nitro alloy steel which is dynamically balanced which ensures faster grinding and defined output.
Drive
Fixed speed Rotation of main rotor by means of 3 phase AC Induction motor. V type Pulleys and belts are used for transmission from motor.
Application Areas
Specially designed for grinding clean waste of following products.
- Blow molded articles like bottles, Jerry cans, drums, jars.etc.
- Injection Molded hollow articles like buckets, baskets, cabinets, etc.
- Rotational Molded Articles, scrap of Plastics tanks.
- Pipes from pipes dia 20 mm to 200 mm OD
For More Details Contact:
Ashwin Engineers
Mr. Bharat Mistry
Email: info@ashwinengineersindia.com
Tel.: +91-79-22811879, 22813670
Modile: +91-9974003841,
Fax: +91-79-2281 1879
Granulator Body
The granulator main body is fabricated from heavy MS plates and sections. The top housing for material inlet has open able arrangement with hinged type movement for ease of cleaning and for use of operator. The opening arrangement can be adjusted by bolts and nut arrangement. Rotor pulleys are covered with protection cover. Input hopper is fabricated from heavy M.S plates and is designed in way that material / parts do not come out from the hopper.
Blades
The blades are made from special alloy steel which are further hardened and grounded for the longer life. The material and design the blades are selected as per input material to be grinded. The blades are designed The blade cutting angle is preset- or factory set which ensures the positive and effective grinding of the input material.
Rotor
The rotor is made from nitro alloy steel which is dynamically balanced which ensures faster grinding and defined output.
Drive
Fixed speed Rotation of main rotor by means of 3 phase AC Induction motor. V type Pulleys and belts are used for transmission from motor.
Application Areas
Specially designed for grinding clean waste of following products.
- Blow molded articles like bottles, Jerry cans, drums, jars.etc.
- Injection Molded hollow articles like buckets, baskets, cabinets, etc.
- Rotational Molded Articles, scrap of Plastics tanks.
- Pipes from pipes dia 20 mm to 200 mm OD
For More Details Contact:
Ashwin Engineers
Mr. Bharat Mistry
Email: info@ashwinengineersindia.com
Tel.: +91-79-22811879, 22813670
Modile: +91-9974003841,
Fax: +91-79-2281 1879
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}