For Sale - AIE - 4234 - Standard Hopper Dryers

1) SHD series Standard hopper dryers offer an effective and low-cost method for plastic material drying.
- Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles.
- They can be directly mounted on the moulding machine for quick drying and space saving.
- For this series, hot air blows evenly from bottom to the top (both SHD-800 and SHD-1000 have down-blowing air pipe and accessible door for easy material clearance) of the hopper with capacity ranging from 12~1,000 kg, Optional 24-hour timer is available for each model.

Features

- Adopt hot air diffuser to gain an even hot air flow to improve drying efficiency.

- Unique hot air inlet elbow design can prevent dust piling up at bottom of the pipe heaters so as to avoid burning.

- All material contact surfaces are made of stainless steel to eliminate material contamination.

- Hopper separated from its base, ensuring convenient cleaning.

- Proportional deviation display thermostat for accurate temperature control.

- All series are equipped with exposed power switch.

- Equipped with excitation tripping overheat protection, making machine operation secure and reliable.

- For SHD-25~150, heater pipes are connected by aluminium sheets and other models are equipped with temperature protection to prevent heater pipe from damaging by blower faults.

- Overheat tripping can automatically cut off power when drying temperature exceeds set deviation value.

- Adopts heat-insulated blower to prolong blower lifespan. 24 hours auto start/stop timer and double insulated hopper are available as options.

- Cyclone dust separator, exhaust air filter, magnetic base and blower inlet filter are optional.

- Hot air recycler, suction box, hopper magnetic, N type floor stand and storage hopper are optional.



2) SHD-U series hopper dryers adopt hot air down-blowing design and use stainless steel made material hoppers to avoid contamination.
- With this design, they are also ideally suitable for use with honeycomb dehumidifiers to dry engineering plastics.
- There are 25 models available, ranging from 20 to 8000 litres.

Features
- Microprocessor is used for accurate temperature control.

- Digital P.I.D. temperature control with LED display.

- Overheat protection to ensure reliable operation.

- 7-day automatic start/stop timer to improve energy saving.

- Unique design of down blow air pipe can spread hot air evenly, keeping plastics dry and temperature stable to raise drying efficiency.

- Models SHD-80U and above have material clearance door to make the clean more convenient and effective.

- SHD-450U and models below are equipped with stainless steel lining aluminium base. SHD-600U~1200U are equipped with aluminium magnetic base. SHD-1500U and model above are equipped with manual butterfly valve.

- Floor stand and safety protective ladder are standard equipments for SHD-1500U and models above.

- Cyclone dust separator, exhaust air filter, magnetic base and blower inlet filter are optional.

- Hot air recycler, suction box, hopper magnetic, N type floor stand and storage hopper are optional.

- Safety protective ladder is optional for SHD-1500U and models above.

- SHD-U-HD heatless dehumidifying hot-air dryer, fit with heatless regenerative device, which can supply dried air with relative low dew-point for speedup materials drying.

- SHD-U-HD heatless dehumidifying hot-air dryer, standard with hot air recyclers, which can save energy effectively. Without dust discharging, which ensures environment protection.

(For images, please see next pages)

For More Details Contact:
Shini Plastics Technologies India Pvt Ltd
Mr. J N Bhat
Mob: 9820305715
Email ID: jnbhat@shiniindia.com