For Sale - SRP - 2985 - Infrared Heaters

Hitco Short wave infrared heaters:
Infrared heat is transmitted directly in the form of electromagnetic rays, at a velocity of approx. 300,000 km / sec: i.e at the speed of light.

IR is therefore not only the faster form of heat, but is also suitable for particularly demanding applications such as vacuum technology and clean room conditions.

Infrared heat is particularly economical on energy compared to other heat sources because it acts quickly, directly on product.

Short wave IR emitters are suitable for all applications in which the attainment of high temperatures in the shortest possible time is what counts.

Applications:
- PET preform heating in stretch blow moulding machines.
- Paint baking.
- Rubber coating drying.
- Soldering fusing in PCB industries.
- Sterilizing mirror coating drying in glass industries.
- Printing ink drying in offset machines.
- Powder coating curing.
- Impregnation plants.
- Paper coating drying
- All type of laminations.
- Preheating prior to embossing.
- Screen printing curing on T-shirts & textiles

Medium wave quartz infrared heaters:
Quartz heater consist of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with specially designed insulating caps which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Quartz heaters are designed to be used in a horizontal position only. Quartz heaters are available in various diameters like 8,10,12,15,19 mm & length 300 to 1500 mm.

Single/Twin tube quartz in emitters with gold coating:
Gold plating is done on quartz tube over 1800. These heaters reflect the radiant energy through the opening are only, improving element efficiency by as much as 20 percent compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surrounding work area temperatures are cooler. These heaters are also available with or without gold plating.

MW quartz IR heating modules:
A resistance wire is enclosed in a small diameter quartz tube running parallel to each other and mounted in a special housing. The two sizes are designed to be installed in the same dimensional spacing as the ceramic infrared elements. IR heating modules half are available in different wattage from 125 to 650 watt and IR heating full are available from 250 to 1000 watt.

Features:
- Good radiant efficiency upto 80 percent.
- Very rapid Heat-up, cool-down time 30 to 60 seconds.
- Watt density up to 40 watts / sq. inch.
- Infrared wavelength Range from 2.5 to 3.0 microns m
- Low power consumption.

Applications:
- Thermoforming
- Plastic forming
- Shrink packaging
- Tunnels
- Laminating
- Curing rubber
- Drying textiles
- Drying lacquers and paints.

(For picture, please see next page)

For More Details Contact:
Ms. Anuradha Gupta
Hitco Electricals Pvt. Ltd.
sales@hitcoheaters.com, vikas@hitcoheaters.com
Tel: + 91-11-41061011
Mobile: +91-9350246220