For Sale - SRP - 3869 - Stamixco Mixing Nozzle

- StaMixCo Technology Ltd., Switzerland, is a company having specialization in static mixers for laminar flow applications such as the homogenization of polymer melts in plastics processing injection molding and extrusion machinery.
Stamixco Mixing Nozzle (SMN) contains 8 very efficient static mixing elements that homogenize the polymer melt prior to injection results in the following benefits.

- Reduced spots, streaks and clouds of color
- Reduced colorant usage (10% - 40%)
- Narrower part tolerance
- Reduced reject rates
- Less part distortion
- Less weight variation
- Improved part quality when using regrind material
- Shorter cycle time
- Improved melt flow
- Increase regrind ratio with consistent product quality
- Rapid nozzle heat-up

-Example:
- Color distribution in toothbrush shaft of SAN

- The SMN mixing nozzle is available in various sizes covering applications from small to large shot weights.

- Stamixco Filter (SMF) can be installed with stamixco mixing nozzle (SMN) without any modifications and which would be useful for processing regrind material.

Benefits:
- Retains solids and only partially molten granulates
- Protects hot runner systems and tools from clogging and / or damaging
- Retrofitting possible without modification of the nozzle body
- O.D. filter = O.D. mixing elements
- Length of filter = length of two (2) mixing elements

- Stamixco Melt Blender (SMB-R) for Extruders are used in
1) Sheet extrusion
2) Profile extrusion
3) Blown film
4) C - Extrusion
5) Foam sheet
6) Wire & cable
7) Fibers & monofilaments
8) Injectuion blow moulding of bottles

Benefits :
- Thermal and composition gradients are virtually eliminated
- Reduced spots, streaks and clouds
- Reduced colorant usage (10% - 40%)
- Improved melt flow, uniform filling of multi-cavity dies
- Homogenous melt and practically only low temperature and concentration differences
- Improved quality when using regrind material
- Foam cell size and distribution uniformity in foamed products
- Improved mechanical characteristics

Static Mixer Melt Blenders For Extrusion Blow Molding Of Bottles Made Of Polyolefines:

Application :
- Homogenizing the polymer melt in the die just before blowing-up the tube to form the bottle.
- Producing a polymer melt of uniform temperature and uniform viscosity. This allows the production of bottles having a uniform wall thickness
- Improving colorant distribution and thus eliminating color streaks in the end product

Characteristics of the Mixer:
- The StaMixCo static mixer melt blender for extrusion blow molding contains in the standard design 4 (four) very efficient mixing elements, which homogenize the polymer melt just before it is formed into tube(s). As the polymer melt flows through the static mixer grid, it is divided into many thin layers that are continuously moved in radial direction and rearranged. By this process, differences in temperature and concentration (e.g. colorant pigments), are reduced by a factor of approximately 3. differences in temperature are reduced further inside the formed tube due to the effect of thermal conductivity and thus temperature differences are practically eliminated. Due to the uniform colorant distribution, colorant streaks in the end product disappear.

- Payback of all these mixing nozzles is within few weeks.

(For images, please see next pages)

For details contact:
Madhu Machines & Systems Pvt Ltd, Vadodara
Mr. Sabu Philip
Phone no:+91 265 2321104 / 2353886
Email Id:machinery@madhu-group.com