Use of lightweight plastics in EVs to drive penetration rates and growth

05-Jun-12
With the electric vehicle (EV) production set to grow at a CAGR of over 80% 2017, plastics used in these vehicles will also see a tremendous growth. The need to increase EV mile range, paralleled by the inherent advantages of plastics, particularly that of lightweight – will drive penetration rates. Analysis from Frost & Sullivan finds that the market earned revenues of US$ 0.5 mln in 2010 and estimates this to reach US$73 mln in 2017. The research covers power train plastics, battery casing plastics, thermal management system materials and wire and cable plastic materials. As the electric vehicles market takes off, it is set to have a positive ripple effect on the uptake of plastics. "Plastics for EVs are driven by lightweighting trends which, in turn, are fuelled by the need to improve EV mile range," notes Frost & Sullivan Research Analyst Shree Vidhyaa Karunanidhi. "EVs are typically characterised by huge batteries which add to the overall weight of the vehicle and affect the mile range. To compensate for the battery weight, metals are increasingly being substituted by plastic." Important structural components such as gears and motors are made of metal. Strength and crash-resistance requirements indicate that metals will remain the preferred material for these applications. However, plastics have huge potential in some of the minor, non-moving components such as energy recovery devices, cooling pipes, pumps, fans, and casing materials. The current level of penetration of plastics in these components varies. In the case of cooling pipes and fans, plastics are preferred, whereas for other components such as energy recovery devices (pedal and pump) and casing materials, plastics have low to moderate penetration. The inherent features of plastics are, nonetheless, set to push their rapid growth rate in these segments. "The reduced scope for plastics in EVs in comparison to conventional, gasoline-fuelled vehicles poses a major restraint to market prospects," cautions Shree Vidhyaa. "EU end-of-life vehicle (ELV) recycling legislation, which entails the use of recyclable materials, poses another challenge to market participants." Although thermoplastics used in these cars are recyclable, automotive shredders are typically made up of different types of plastics. These need to be sorted out before they are recyclable. Therefore, on the one hand there is a need for lightweight cars to improve the mile range in EVs. On the other hand, ELV recycling legislation requires the OEMs to use recyclable materials. "This issue can be solved if OEMs work with tier-1 suppliers to develop recycling technologies," advises Shree Vidhyaa. "This will ensure sustainable use of plastics in the long-term."
  More News  Post Your Comment

Previous News

Next News

{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Name Required.

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha
Dispenser Pump, Spray Pump

Dispenser Pump, Spray Pump