For Sale - PCM - 4796 - 250 Liter Blow Molding Machine

Moulded article capacity max. : 250 litre
Parison weight (HMWHDPE) max. : 16 kg
Die diameter min. / max. : 160 / 220 mm
Plasticising capacity approx (HMW HDPE with HLMI 2) : 340 kg / hr
No. of parison control points : 200
Accumulator head type : FIFO with overlapping and streamlined
flow; Conducive for easy colour change
Extruder type : With grooved feed section and special
mixing element suitable for processing of
HMWHDPE with HLMI as low as 2.and
yielding high quality extrudate.
All barrel heat zones blower-cooled.
Screw diameter : 110 mm
Screw L : D ratio : 28 :1
Screw speed min. / max : 35 / 60 RPM
Extruder height adjustment stroke (motorized) : 580 mm
Mould clamping force max. : 610 kN
Clamp daylight min. / max. : 550 / 1550 mm
Clamp opening stroke : 2 × 450 mm
Mould envelope max. (Height × Width × Thickness) : 1520 × 1080 × 800 mm
Clamp unit traverse (for mould mounting only) : 1067 mm
Electric motor for main hydraulics : 30 + 5.5 = 35.5 kW
Electric motor for parison hydaulics : 5.5 kW
Electric motor for extruder : 90 kW
Electric motor for extruder platform lift : 1.5 kW
Heating load : 55 kW
Total connected load 415 V × 3 Ø × 50 Hz : 187.5 kW
Sh: 2/4
Blow and Unscrew Unit
Horizontal adjustment parallel to mould parting plane : ± 10 mm
Horizontal adjustment traverse to mould parting plane : ± 25 mm
Vertical stroke of blowpin cylinder(3 step movement) : 170+75+5 = 250 mm
Blow pins expand – together (min / max) : 125 / 425 mm
Take-out gripper
Stroke : By rodless cylinder (Pneumatic)
Grip : By hydraulic cylinder Control
Machine sequence : TMC
Heaters : TMC
Parison programmer : TMC
Total weight (approx.) : 25 tonne