For Sale - PCM - 2747 - Three Arm Bi-Axial Machines
Specification
Reference Number
PCM - 2747Product
Three Arm Bi-Axial MachinesProduct Details
Rotational Molding process is different as compared to other plastics processes in which heat is prime & crucial factor.
In the complete process, first the mold is loaded with the raw material in resin form. The loaded mold is then shifted in to Hot air oven where it is oriented and rotated at suitable low speed. As the molten resin gets properly heated & oriented, it adheres to the mold's inner surface until completely fused. Then the mold is moved to the air, water or the both to slowly reduce the temperature when the mold is still in rotating mode. Finally, the mold is dismantled to get the finished Roto molded article & is then again reloaded for the next cyclic process.
Salient Features of our machines:
- Most efficient in Fuel & energy consumption compared to other types of machines.
- Very consistent product quality due to smooth Bi-axial rotation,
- Highest production due to lowest cycle time.
- Uniform heating of the mould with forced air circulation in heating chamber.
- Uniform distribution of material hence possible to produce tank with lesser weight.
- Best compatibility in market due to lowest production cost per tank.
- Lowest rejection rate due to sound & proven technology
- Clean & silent operation of machine.
- Automatic package burner of Italian make which is most fuel efficient
- Flexibility to produce double & triple layer tanks due uniform distribution of material.
- AC variable drives of reputed make for all Minor & major axis's for minute & accurate speed control
- Powder coated electrical control panel with dust proof construction & with all switch gears of either imported / highly reliable.
- Control panel is equipped with AC drives, Digital indicators, temperature controller, timer, & advance automation circuit for entire process control & all necessary safety features
For More Details Contact:
Ashwin Engineers
Mr. Bharat Mistry
Email: info@ashwinengineersindia.com
Tel.: +91-79-22811879, 22813670
Modile: +91-9974003841,
Fax: +91-79-2281 1879
In the complete process, first the mold is loaded with the raw material in resin form. The loaded mold is then shifted in to Hot air oven where it is oriented and rotated at suitable low speed. As the molten resin gets properly heated & oriented, it adheres to the mold's inner surface until completely fused. Then the mold is moved to the air, water or the both to slowly reduce the temperature when the mold is still in rotating mode. Finally, the mold is dismantled to get the finished Roto molded article & is then again reloaded for the next cyclic process.
Salient Features of our machines:
- Most efficient in Fuel & energy consumption compared to other types of machines.
- Very consistent product quality due to smooth Bi-axial rotation,
- Highest production due to lowest cycle time.
- Uniform heating of the mould with forced air circulation in heating chamber.
- Uniform distribution of material hence possible to produce tank with lesser weight.
- Best compatibility in market due to lowest production cost per tank.
- Lowest rejection rate due to sound & proven technology
- Clean & silent operation of machine.
- Automatic package burner of Italian make which is most fuel efficient
- Flexibility to produce double & triple layer tanks due uniform distribution of material.
- AC variable drives of reputed make for all Minor & major axis's for minute & accurate speed control
- Powder coated electrical control panel with dust proof construction & with all switch gears of either imported / highly reliable.
- Control panel is equipped with AC drives, Digital indicators, temperature controller, timer, & advance automation circuit for entire process control & all necessary safety features
For More Details Contact:
Ashwin Engineers
Mr. Bharat Mistry
Email: info@ashwinengineersindia.com
Tel.: +91-79-22811879, 22813670
Modile: +91-9974003841,
Fax: +91-79-2281 1879
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}