For Sale - PCM - 950 - Injection Moulding Machine upto 350 tons
Specification
Reference Number
PCM - 950Product
Injection Moulding Machine upto 350 tonsProduct Details
Model:- PAM350T
Injection Unit:
Shot weight [PS]:-1210/1575 gms.
Swept Volume:-1154/1508cc
Screw dia:-70 /80Mm
Screw Stroke:-350mm
Screw Speed:-200RPM
Injection Pressure:-1800/1378 Kg/sqcm
Clammping Unit:
Clammping Force:-350Ton
Distance between Tie Bars (HxV):-700x700mm
Minimum Mould Height:- 300mm
Max. daylight:-1300mm
Mould Opening Stroke:-1000mm
Hydrulic Ejector Force:-7.50Ton
Hydrulic Ejector stroke:-140mm
Power /Heating Unit :-
Pump Motor:-45.0Kw
Heater Capacity:-18.0Kw
Controller:-
* Self-Adopted PID Temp. Controller
* Mould Memory-30 sets.
* All Input diagnostic display from the screen.
* All output diagnostic display from the screen.
* 16bit high speed Microprocessor.
* Cold start Prevention of Screw.
* Production Counter Facility.
* Self-diagnosis system for fault alarms.
* Graphic for Machine Movement.
* Digital setting of Proportional Pressure & Flow.
Machine:
* Direct Hydrulic Clamping Unit.
* Linear Transducer for clamp and Injection.
* Clamping force can be adjusted up to the maximum figure started to suit the size of the mould.
* Mould safty device gives low-pressure platen approach. Which avoids possible cavity damaged caused by incompletely ejected moulding.
* Speed Movements of the moving platen are adjustable for the complete stroke in both directions of travel and speed of low approach when clamping and opening can be independently varied.
* Large platen area.
* Long rapid platen stroke
* Transducer for Clamp & Injection.
* Injection Pressure applied to material is infinitely variable.
* Screw Speed Infinitely variable by hydraulic control.
* Screw reaction pressure during plasticization is hydraulically adjustable.
* Swiveling Mechanism [Mechanical]
* Suck back in multiple stages.
* Adjustable nozzle Movement in Multiple stages.
* Auto Purge facility.
* Programmable Hydraulic ejector
* Programmable Air Ejector.
* Electrically and Hydrlically Interlocked safety guards.
Injection Unit:
Shot weight [PS]:-1210/1575 gms.
Swept Volume:-1154/1508cc
Screw dia:-70 /80Mm
Screw Stroke:-350mm
Screw Speed:-200RPM
Injection Pressure:-1800/1378 Kg/sqcm
Clammping Unit:
Clammping Force:-350Ton
Distance between Tie Bars (HxV):-700x700mm
Minimum Mould Height:- 300mm
Max. daylight:-1300mm
Mould Opening Stroke:-1000mm
Hydrulic Ejector Force:-7.50Ton
Hydrulic Ejector stroke:-140mm
Power /Heating Unit :-
Pump Motor:-45.0Kw
Heater Capacity:-18.0Kw
Controller:-
* Self-Adopted PID Temp. Controller
* Mould Memory-30 sets.
* All Input diagnostic display from the screen.
* All output diagnostic display from the screen.
* 16bit high speed Microprocessor.
* Cold start Prevention of Screw.
* Production Counter Facility.
* Self-diagnosis system for fault alarms.
* Graphic for Machine Movement.
* Digital setting of Proportional Pressure & Flow.
Machine:
* Direct Hydrulic Clamping Unit.
* Linear Transducer for clamp and Injection.
* Clamping force can be adjusted up to the maximum figure started to suit the size of the mould.
* Mould safty device gives low-pressure platen approach. Which avoids possible cavity damaged caused by incompletely ejected moulding.
* Speed Movements of the moving platen are adjustable for the complete stroke in both directions of travel and speed of low approach when clamping and opening can be independently varied.
* Large platen area.
* Long rapid platen stroke
* Transducer for Clamp & Injection.
* Injection Pressure applied to material is infinitely variable.
* Screw Speed Infinitely variable by hydraulic control.
* Screw reaction pressure during plasticization is hydraulically adjustable.
* Swiveling Mechanism [Mechanical]
* Suck back in multiple stages.
* Adjustable nozzle Movement in Multiple stages.
* Auto Purge facility.
* Programmable Hydraulic ejector
* Programmable Air Ejector.
* Electrically and Hydrlically Interlocked safety guards.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}