For Sale - PCM - 4976 - 100 To 120 Kg/Hr Recycling Line

Reprocessing Line Model: GMS-60-I with Forced Hopper
Polymers to Reprocess: PE, PP, BOPP, PS, ABS, PC, PBT, EVA, POM, CA, TPE, OPS, PMMA, SAN, ETC.
Final Product: Granules (Dieface).
Max Output: 100 ~ 120 Kgs Per Hour with Injection / Blow / Roto
Moulded and Pipe Waste alike.
Output Depends on No of times Screen Change and
Density of Waste

Scope of Supply:
1. Forced Hopper AFH 60 I
Installed Power: 3.0 kW
Hopper Capacity: 30 Litres
Feeding Screw: EN-41-B – 80mm

Single Screw Extruder GMS 60-I
Installed Power: 55kW (Includes Heating Load)
Screw Diameter: 60mm
L/D: 35:1
Main Screw: EN-41-B – Nitrided and Mirror Polished
Bimetallic (Optional)
Speed Reduction: Premium, Gearlinc, Craftsman or alike with Thrust
Bearing and Water Cooling, Direct Coupled with
Special Coupling to brake in case of Screw Jam.
Heating Zone: 4 Zones, 25 kW
Cooling Fan: 4 Nos
Venting: Included
Vent Pump: Optional

Screen Changer: Online Hydraulic – GMS BDP 125-I
Installed Power: 7.0kW
Filter Diameter: 125mm
Pump Pressure: 200 bar (Max)
Hydraulic Oil Capacity: 25 Litres
Installation: Direct Coupled to Barrel and Cutter.
Melt Pressure: Pressure Transducer of Max 250 Bar.
Machine Stoppage: No Stoppage of Machine to Change Screen

Dieface Cutter: GMS TF 150-I + 180-C
Installed Power: 6.7 kW
Centrifugal Drier: Included
Internal Water Circulation: Closed Loop with Heat Exchanger.
Water Requirements: 20 LPM in closed loop.
Water Cooling: Depends on Polymer to be Recycled and its MFI
Capacity: 80 to 250 kgs per hour.
Filter Mesh: 20, 40, 60, 80, 100

Electrical Components (As Available)
Panel: Analogue
Motors: Bharat Bijllee, Hindustan
AC Drives: Fuji, Danfoss
Controllers: Multispan, Selec
Contractor & Relay’s: Eaton, Schneider
SFU: Siemens
Digital Relay’s: PLA, Omron, Salzer
Switches: Technic
Potentiometer: Pankaj, Pawan
Fuse: Fast Blowing Tube Fuses
MCB: Eaton, Schneider, L&T, Siemens
Wiring: Panel to Machine Included