For Sale - PCM - 4977 - 40 To 60 Kg/Hr Recycling Line

Reprocessing Line Model: GMS-50-I with Forced Hopper
Polymers to Reprocess: PE, PP, BOPP, PS, ABS, PC, EVA, POM, CA,
TPE, OPS, PMMA, SAN, ETC.
Final Product: Granules (Dieface).
Output: 40 ~ 60 Kgs Per Hour (Depends on Density of Waste).

Forced Hopper AFH 50 I
Installed Power: 2.2 kW
Hopper: 25 Litres
Feeding Screw: EN-41-B
Single Screw Extruder GMS 50-I
Installed Power: 29.7kW (Includes Heating Load)
Screw Diameter: 50 mm, L/D: 35:1
Main Screw: EN-41-B – Nitrided and Mirror Polished
Avg. Max Output: 50 kgs per hour (Depending on Waste Density and
Dirt Content)
AC Drive: Danfoss / ABB
Speed Reduction: Premium with Thrust Bearing and Water Cooling,
Direct Coupled with Special Coupling to brake in
case of Screw Jam.
Heating Zone: 3 Zones, 14.6 kW
Cooling Fan: 3 Nos
Venting: Included
Control Panel: Complete Machine one Panel

Screen Changer: Manual Type – GMS BDM 60-I
Installed Power: 2.4kW
Filter Diameter: 60mm
Installation: Direct Coupled to Barrel and Cutter.
Melt Pressure: Pressure Transducer of Max 250 Bar.
Machine Stoppage: No Stoppage of Machine to Change Screen

Dieface Cutter: GMS TF 50-I + 180-C
Installed Power: 2.6+1.5+.75+.75=5.6 kW
Centrifugal Drier: Included
Internal Water Circulation: Closed Loop with Heat Exchanger.
Water Requirements: 20 LPM in closed loop.
Water Cooling: Depends on Polymer to be Recycled and its MFI
Capacity: 30 to 100 kgs per hour.

5. Electrical Components (As Available)
Panel: Analogue Type
Motors: Bharat Bijllee, Hindustan
AC Drives: Fuji, Danfoss
Controllers: Multispan / Selec
Contractor & Relay’s: Eaton, Schneider, L&T, Siemens
SFU: Siemens
Digital Relay’s: PLA, Omron, Salzer
Switches: Technic
Potentiometer: Pankaj, Pawan
Fuse: Fast Blowing Tube Fuses
MCB: Eaton, Schneider, L&T, Siemens
Wiring: Machine to Panel Wiring included