For Sale - PTP - 1479 - Stand-up pouch, zipper bag automatic 3-side-seal bag making machine

Specification

Reference Numbers

PTP - 1479

Product

Stand-up pouch, zipper bag automatic 3-side-seal bag making machine
Click here to download  

Product Details

1. Applicable Material: Sealable laminated film, thickness 40-150µ.(80-150µ for Stand-up pouch and Zipper bag)

2. Main Drive: Main drive servo motor with driver provide accurate sealing time control, suitable for constant sealing time control system

3. Feeding Motor: Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control

4. Unwind Section:(a) Horizontal type unwind stand / Swing-out/Lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient.

(b) Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control.

(c) Equipped with Line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position.

(d) Upgraded dancer-roller provides stable tension for films before entering the bag making section.

(e) Two bottom-gusset-unwinding devices are equipped with motors and position detectors, which can provide stable feeding speed and tension.

5. Bag Making: (a) ABM-53SPZ can make four kinds of bags: 3-side-seal bag, stand-up pouch, 3-side-seal bag with zipper, and stand-up pouch with zipper.

(b) 3-side sealed bags can be made by 3-lanes operation within maximum parent-web width.

(c) Stand-Up pouches and zippers bags can be made by 2-lanes operation within maximum parent-web width.

(d) Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.

(e) Equipped with Ultrasonic Welder, the zipper (in the side-sealed position) can be welded and flattened perfectly, solve the leakage problem.

(f) Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request).

(g) Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops.

(h) The design of safety cutter provides extra safety for the operator.

6. Maintenance: Central Lubrication System is connected to each important internal parts, makes maintenance easier and faster.

7. Computer Control System, Touch-Screen, and 3-Servo System :(a) Maintain a constant sealing time, which may largely reduce test-run scraps. When the machine speed is changed, it is not necessary to adjust temperature of the heater.

(b) Touch-screen makes operation easier and faster.

(c) Built-in Sealing Temperature Controller.

(d) Auto alarm/Stop available for abnormal condition.

(e) Alarm messages are displayed on the screen.

(f) Modem interface available for remote maintenance.

(g) Data base for saving 100 sets of working parameters.

(h) Operation and maintenance procedures and parameters are memorized in the computer control system for easy setup or review.

8. Optional Accessories:(a) Unwind 3"/6" airshaft

(b) Pneumatic loading device (in unwind section)

(c) 6" air chuck

(d) Vertical/horizontal 2nd unwind stand

(e) Various puncher

(f) Conveyer

(g) Round corner cutter


{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Name Required.

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha