For Sale - PTP - 4089 - Frankische Corrugator Model FDC 450 - 51 and moulds

Model: FDC 450 - 51
Technical Data - FDC 450
1) Current supply
- Connect power: 11 KW
- Drive: Thyristor-controlled DC motor 5.2 KW protecting mode IP 44
- Wiring: according to VDE 0113, VDE 0100, 415/240 V. 50 Hz

2) Water and compressed air
- Compressed air supply: 3 bar Minimum, 12 bar Maximum
- Water supply: G 1.5 - 2 bar Minimum, 6 bar Maximum
- Water discharge: G 1.5 screwed flange

3) Production capacity
- Production speed: gear I 3.5 m/mim, gear II 7.3 m/mim
- Max output: PVC approx 850 Kg / h
- PE approx . 380 Kg / h (single - Walled)
- PE approx. 630 Kg / h (double - Walled)
- Max pipe outside diameter: 450 mm
- Min pipe inside diameter: 140mm

4) Cooling
- Primary (corrugator): Plate exchanger type PL 04 (may add corrosion inhibitor)
- Secundary (mould blocks): Per 100 completely desalted water add 150 g Albaphos GS2 and 50 g calcuimnitrate - tetra hydrate (container contents approx. 400)

5) General
- Operating Height: 1050 mm
- Number of mould blocks: 51 pairs
- Length of chain: 8011.08 mm
- Weight: 10,000 Kg
- Lacquer: RAL 5010
- The machine and all moulds are in good condition

Year of manufacture 1995

Located in Germany

(For images, please see next pages)