For Sale - RM - 3295
Specification
Reference Number
RM - 3295Location
IndiaProduct Details
HDPE and HMHDPE by Hostalen Plant Technology
- Indian Oil has set up dedicated High Density Polyethylene (HDPE) plant with capacity of 300 KTA to produce HOPE & HMHDPE grades.
- This plant is based on state-of-the-art low pressure Slurry Process Technology (Hostalen) from Lyondell Basell. Germany.
- The Hostalen Process is the high-tech slurry process delivering outstanding HDPE Bimodal products.
- A key lecture is the excellent combination of processability with final product performance.
- depending on product needs, the Hostalen' process can be run using different set-ups of the two reactors to produce variety of unimodel and bimodal HDPE glades.
- Hostalen is a well accepted technology globally and 36 such plants are already operating worldwide with total production of - 6,5 million MT.
Key Features of our HDPE made by Hostalen Process
- Product density ranging 0,94010 0,965 g/cc
- MFR ranging 0.12 to 60.0 (1,) g/10 min
- High resistance to stress cracking.
- High toughness and elongation at break
- Very good chemical resistance
- Higher notch impact strength
Dedicated HDPE (Hostalen) Plant - Product Envelope
HDPE is used for making injection moulded caps, heavy duty crates, containers, bins, textile bobbins, household goods, luggage ware, storage bins, pressure pipes (for gas and water), high molecular weight films, woven sacks, small blow moulded bottles, L-ring drums, jerry-cans
- Mono Filaments etc.
For More Details Contact:
Indian Oil Corporation Limited, New Delhi, India
Ishan Agarwal
Tel: +91 8588811905/2125
Email ID: agarwali@indianoil.in, agarwalpuneet@indianoil.in, georgemc@indianoil.in
- Indian Oil has set up dedicated High Density Polyethylene (HDPE) plant with capacity of 300 KTA to produce HOPE & HMHDPE grades.
- This plant is based on state-of-the-art low pressure Slurry Process Technology (Hostalen) from Lyondell Basell. Germany.
- The Hostalen Process is the high-tech slurry process delivering outstanding HDPE Bimodal products.
- A key lecture is the excellent combination of processability with final product performance.
- depending on product needs, the Hostalen' process can be run using different set-ups of the two reactors to produce variety of unimodel and bimodal HDPE glades.
- Hostalen is a well accepted technology globally and 36 such plants are already operating worldwide with total production of - 6,5 million MT.
Key Features of our HDPE made by Hostalen Process
- Product density ranging 0,94010 0,965 g/cc
- MFR ranging 0.12 to 60.0 (1,) g/10 min
- High resistance to stress cracking.
- High toughness and elongation at break
- Very good chemical resistance
- Higher notch impact strength
Dedicated HDPE (Hostalen) Plant - Product Envelope
HDPE is used for making injection moulded caps, heavy duty crates, containers, bins, textile bobbins, household goods, luggage ware, storage bins, pressure pipes (for gas and water), high molecular weight films, woven sacks, small blow moulded bottles, L-ring drums, jerry-cans
- Mono Filaments etc.
For More Details Contact:
Indian Oil Corporation Limited, New Delhi, India
Ishan Agarwal
Tel: +91 8588811905/2125
Email ID: agarwali@indianoil.in, agarwalpuneet@indianoil.in, georgemc@indianoil.in
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}