For Sale - PNE - 1718 - 140 Meters / Min, 8 colour gravure printing press

Our 8 colour rotogravure press is highly suited for printingon Foils, Films, Laminates and Paper

Main Printing Station:
Consists of
- 1 No. Main motor - AC.
- Eight Nos. Printing Stations.
(Reversible Station Optional)
- Side frame construction of precisely machined Mild Steel Plates.
- Cylinder Shaft supported by bearings mounted on bearing housings.
- Can accept hollow as well as Shaft Type cylinders
- Common Drive for all the printing stations connected through Individual Gear Box.

Gearbox - Helical Gear Box Assembly duly ground and hardened with oil bath Lubrication.

Ink System - Immersion type inking system consists of 1 no. Stainless steel Ink Tray

Pneumatically Operated
- Doctor Blades Assembly
- Impression Roll System
- Drying hood- a unique and important feature of the machine, which is a must for easy web guiding and cleaning of the idler rollers.
- Nip Roll Assembly - for In Feed and Out Feed Station.

Registration System
- Motorized longitude (Vertical) colour register system.
- Manual side lay (lateral) register by means of a mounting blocks on the operator side of + 10mm correction

Heating System - The drying system is designed for following
- Electric Heating System Or
- Diesel Fired Heating System Or
- Thermic Fluid Heated Air Blow System

Exhaust System Unwind Station Consist of
- Web guiding system
- Automatic Tension control system powder brake with load cells
- Auto stop mechanism to stop the machine for the break in web
- Pneumatic shaft

In Feed Station Consist Of
- 1 No. AC Motor Controlled by Programmable Digital AC Drive
- Load cell back up duly synchronized and auto tension controlled

Out Feed Station
- 1 No. AC Motor Controlled by Programmable Digital AC Drive
- Load cell back up duly synchronized and auto tension controlled

Rewind Station Consist Of
- 1 No. AC Motor Controlled by Programmable Digital AC Drive
- Load cell back up duly synchronized and auto tension controlled
- Pneumatic shaft

Optional
- Automatic registration control system
- Web viewing system
- Turret unwind and rewind system
- Motorized ink pumps with immflammable motors
- Electronic line shaft system (Servo drive system)

Technical Specification -
- Type of machine - Rotogravure Printing Machine
- Number of printing stations - Two to Ten colors
- Web width - 500mm to 1500mm
- Print width - 400mm to 1400mm
- Printing Repeat - 320mm - 750mm
- Printing Possibilities - 1 to 10 colours
(Variable as per number of colour of machine)
- Printing Speed - 140 meters / minute maximum Mechanical Speed*
- Power Requirement - Variable as per the Machine size
- Supply Voltage - 415 V, 3 phase, 50 cycles / sec, 4 wire
- Material to be printed - Foil, Paper, Film and Laminates