Required - TTE - 2254 - Hydro - Static Pressure Testing Machine
Specification
Reference Number
TTE - 2254Product
Hydro - Static Pressure Testing MachineManufacturer
IndianProduct Details
Our hydrostatic pressure testing m/c. is used to find out the internal hydro-static pressure of HDPE, R-PVC, C-PVC. MDPE & LLDPE pipes as per IS, ASTM or equivalent standards.
Plastic pipes are mainly used for transportation of portable water from one place to another place. Hence, these pipes will undergo tremendous pressure by water. To check, whether all these plastic pipes are having quality to withstand pressure, we provide "Hydro-Static Pressure Testing M/C." for this purpose.
If the Pipes are made with higher percentage of filler and processing method is not proper, then chances of failure in hydrostatic pressure test is too much.
Features
- Pressure range upto 70 kg/cm2 or as per requirement.
- Pressure is control by Electro-mechanical contact type pressure gauge with analogue adjustment & display of the test pressure.
- Microprocessor based time totalizes is incorporated with long term stations to calculate the actual testing period.
- Pipe failure indicating device is also provided.
- Machine is provided with single, two, three up to six stations.
- Provision for master pressure gauge also provided
- Attachment of Microprocessor based digital controller for display of test pressure is available at extra cost.
- Attachment of temperature and pressure recorder is available at extra cost.
Plastic pipes are mainly used for transportation of portable water from one place to another place. Hence, these pipes will undergo tremendous pressure by water. To check, whether all these plastic pipes are having quality to withstand pressure, we provide "Hydro-Static Pressure Testing M/C." for this purpose.
If the Pipes are made with higher percentage of filler and processing method is not proper, then chances of failure in hydrostatic pressure test is too much.
Features
- Pressure range upto 70 kg/cm2 or as per requirement.
- Pressure is control by Electro-mechanical contact type pressure gauge with analogue adjustment & display of the test pressure.
- Microprocessor based time totalizes is incorporated with long term stations to calculate the actual testing period.
- Pipe failure indicating device is also provided.
- Machine is provided with single, two, three up to six stations.
- Provision for master pressure gauge also provided
- Attachment of Microprocessor based digital controller for display of test pressure is available at extra cost.
- Attachment of temperature and pressure recorder is available at extra cost.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}