Required - TTE - 3247 - Melt Pressure Transducers - DYN-X Series

Dynisco Range of DYN-X Series:
1) DYN-X Rigid:
- Pressure ranges: 0 - 500 psi to 0 - 30,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 1.0 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P

2) DYN-X Flex:
- Pressure ranges: 0 - 500 psi to 0 - 30,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 1.0 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P

3) DYN-X TC:
- Pressure ranges: 0 - 500 psi to 0 - 30,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 1.0 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P

Features:
- Value priced
- Accuracy better than +/- 1.0 percent
- Dymax coated stainless steel wetted parts
- Proven sensor design
- 0 - 500 to 0 -10,000 psi
- Internal 80 percent shunt calibration

Benefits:
- Economical pressure measurement
- Repeatable pressure measurements
- Superior abrasion resistance
- Good stability and repeatability
- Wide variety of pressure ranges
- Easy to calibrate with local indicator

The DYN-X series transducer is a +/- 1.0 percent sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. It is the value leader and widely accepted by OEMs and users throughout the world. The DYN-X transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. Optional thermocouple or RTD configurations are available to provide melt temperature. The DYN-X features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Specifications:
Performance characteristics:
- Output: 3.33 mV/V +/- 2.0 percent
- Input voltage: 10 Vdc recommended, 12 Vdc maximum
- Combined error: +/- 1.0 percent FSO
(Including linearity, repeatability and hysteresis)
- Repeatability: +/- 0.2 percent FSO
- Configuration: Four-arm bonded foil wheatstone bridge strain gage
- Bridge resistance: Input and Output: 345 Ohms minimum
- Over pressure: 2 x FSO
- Zero balance: +/- 10 percent FSO
- Internal shunt calibration (R-Cal): 80 percent FSO +/- 1 percent
- Insulation resistance: 1000 megohms at 50 Vdc

Temperature and mechanical characteristics:
- Max diaphragm temperature: 750 Degree F (400 Degree C)
- Zero shift (due to temperature change): 25 psi/100 Degree F typical (45 psi/100 Degree C)
- Electronics operating temperature: 250 Degree F (121 Degree C)
- Zero shift due to temperature change: +/- 0.05 percent FS/Degree F max (+/- 0.10 percent FS/ Degree C max)
- Sensitivity shift due to temperature change: +/- 0.02 percent FS/Degree F max (+/- 0.04 percent FS/Degree C max)
- Mounting torque: 500 inch/lbs. maximum
- Standard wetted parts: Dymax coated 15-5 PH SST

Dynisco's manufactures a wide variety of robust 3.33 mV/V melt pressure transducers, which are designed specifically for harsh and rugged environments of the extrusion and Polymer Processing Industries. Select from one of the many robust and reliable products offered on the market today. No matter what the pressure requirement, whether it is for safety reasons or control to help tighten product specifications, Dynisco can supply it.

(For picture, please see next page)

For More Details Contact:
Manan Enterprise
Mr. Yogesh Desai
Tel.: +91-22-26102833
Mobile: +919819301890
E-mail: manan@bom4.vsnl.net.in