Required - TTE - 3259 - Melt Pressure Transducers - MDA410 Series

Dynisco Range of MDA410 Series:
1) MDA410
- Pressure ranges: 0 - 35 bar to 0 - 700 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.25 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Handles temperatures up to 1000 Degree F
- Superior thermal compensation
- Inconel diaphragm
- Internal 80 percent shunt calibration
- CE Approved

Dynisco's MDA410 Series of pressure transducers are the ideal choice for non-mercury, food and medical extrusion applications requiring a fill material that meets FDA and USDA requirements. Model MDA410 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000 Degree F.

The transducers are supplied with a high accuracy (0.25 percent), great repeatability and reliability. An 6-pin Bendix-style connector is used for easy connect and disconnect.

The MDA410 is the most commonly used alternate fill melt pressure transducer in the world.

2) MDA412
- Pressure ranges: 0 - 35 bar to 0 - 700 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.25 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Handles temperatures to 538 Degree C
- Advanced thermal compensation at the tip
- Inconel diaphragm
- Internal 80 percent shunt calibration
- CE approved

Dynisco's MDA412 Series of pressure transducers are the ideal choice for non-mercury, food and medical extrusion applications. The model MDA412 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 538 Degree C.

The transducers are supplied with a high accuracy (0.25 percent), great repeatability and reliability. Model MDA412is designed with a 6" snout and 18" flexible stem to provide thermal isolation between the electronics housing and the rigid stem. The units come equipped with an 6-pin Bendix-style connector for easy connect and disconnect.

The MDA412 is the most commonly used flexible alternate filled melt pressure transducer in the world

3) TDA412
- Pressure ranges: 0 - 35 bar to 0 - 700 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.25 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Handles temperatures to 538 Degree C
- Single point pressure and temperature measurement
- Inconel diaphragm
- RTD and optional thermocouples are available
- Internal 80 percent shunt calibration
- CE Approved

Dynisco's TDA412 Series of pressure/temperature transducers are the ideal choice for non-mercury, food and medical application measurements. Model MDA412 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 500 Degree C. A 6-pin Bendix-style connector is used for easy connect and disconnect. The TDA412 comes standard with a removable type J thermocouple.

The TDA412 is the most commonly used flexible alternate filled melt pressure/temperature transducer in the world.

4) LDA415
- Pressure ranges: 0 - 35 bar to 0 - 700 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.25 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: 1/2-14 NPT Conduit
- Temperature up to 538 Degree C
- All welded stainless steel with wash down capability
- Available with hermetic connector or conduit fitting
- Internal 80 percent shunt calibration
- CE approved

Dynisco's LDA415 Series of wash down pressure transducers are the ideal choice for food and medical extrusion measurements requiring wash down capability and a mercury free sensor. Model LDA415 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 538 Degree C.

The transducers are supplied with a high accuracy (0.5 percent), great repeatability and reliability. An 1/2-14 NPT conduit fitting or 6-pin hermetically sealed Bendix-style connector is used for easy connect and disconnect.

Dynisco's manufactures a wide variety of robust 3.33 mV/V melt pressure transducers, which are designed specifically for harsh and rugged environments of the extrusion and Polymer Processing Industries. Select from one of the many robust and reliable products offered on the market today. No matter what the pressure requirement, whether it is for safety reasons or control to help tighten product specifications, Dynisco can supply it.

(For images, please see next pages)

For More Details Contact:
Manan Enterprise
Mr. Yogesh Desai
Tel.: +91-22-26102833
Mobile: +919819301890
E-mail: manan@bom4.vsnl.net.in