Required - TTE - 3252 - Melt Pressure Transducers - MDA460 Series

Dynisco Range of MDA460 Series:
1) MDA 460
- Pressure ranges: 0 - 100 bar to 0 - 2,000 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- DyMax coated 15-5 PH stainless steel wetted parts
- Great stability and repeatability
- Internal 80 percent shunt calibration
- CE approved

Dynisco's MDA460 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements requiring simple installation, high accuracy (0.5 percent), repeatability and reliability.
Standard transducers are supplied with a DyMax coated diaphragm for increased wear resistance and longevity. A 6-pin Bendix-style connector is used for easy connect and disconnect.

2) MDA460-M10
- Pressure ranges: 0 - 350 bar to 0 - 700 bar
- Output: 3.33 mV/V
- Accuracy: +/- 1.0 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Internal 80 percent shunt calibration
- Good stability and repeatability
- Reduces mounting hole dead space
- Flexible stem offers greater thermal isolation and mounting ease
- CE approved

Dynisco's MDA460-M10 melt pressure transducer utilizes a small 6mm sensing diaphragm for space restricted areas making it the ideal choice for small extruders and rheometers.

The MDA462 provides simple installation, high accuracy (1 percent), repeatability and reliability. Standard transducers are supplied with a DyMax coated diaphragm for increased wear resistance and longevity. A 6-pin Bendix-style connector is used for easy connect and disconnect.

3) MDA462
- Pressure ranges: 0 - 100 bar to 0 - 2,000 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- DyMax coated 15-5 PH stainless steel wetted parts
- Flexible stem offers greater thermal isolation and mounting ease
- Good stability and repeatability
- Internal 80 percent shunt calibration
- CE approved

Dynisco's MDA462 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements requiring simple installation, repeatability and reliability.
Standard transducers are supplied with a DyMax coated diaphragm for increased wear resistance and longevity. A 6-pin Bendix-style connector is used for easy connect and disconnect.

4) TDA463
- Pressure ranges: 0 - 100 bar to 0 - 2,000 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Single point temperature and pressure measurement
- RTD and optional thermocouples available
- Field - replaceable type J thermocouple
- Internal 80 percent shunt calibration
- CE approved

Dynisco's TDA463 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements requiring separate temperature output, simple installation, repeatability and reliability.
Standard transducers are supplied with a DyMax coated diaphragm for increased wear resistance and longevity. A 6-pin Bendix-style connector is used for easy connect and disconnect. The TDA463 comes standard with a removable type J thermocouple.

5) MDA467:
- Pressure ranges: 0 - 35 bar to 0 - 2,000 bar
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF
- Standard electrical connection: Bendix PT02A-10-6P
- Fits in tight locations
- Internal 80 percent shunt calibration
- CE approved

Model MDA467 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The MDA467 features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation.
Standard transducers are supplied with a DyMax coated diaphragm for increased wear resistance and longevity. A 6-pin Bendix-style connector is used for easy connect and disconnect.

The MDA467 designed for the restricted locations is ideal for nozzle pressure measurements in injection molding.

Dynisco's manufactures a wide variety of robust 3.33 mV/V melt pressure transducers, which are designed specifically for harsh and rugged environments of the extrusion and Polymer Processing Industries. Select from one of the many robust and reliable products offered on the market today. No matter what the pressure requirement, whether it is for safety reasons or control to help tighten product specifications, Dynisco can supply it.

For More Details Contact:
Manan Enterprise
Mr. Yogesh Desai
Tel.: +91-22-26102833
Mobile: +919819301890
E-mail: manan@bom4.vsnl.net.in