Required - TTE - 3260 - Melt Pressure Transducers - PT418 Series

Dynisco Range of PT418 Series:
1) PT418:
- Pressure ranges: 0 - 1,000 psi to 0 - 10,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF Jam bushing
- Standard electrical connection: Bendix PT02A-10-6P

2) PT419:
- Pressure ranges: 0 - 1,000 psi to 0 - 10,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF Jam bushing
- Standard electrical connection: Bendix PT02A-10-6P

3) TPT419:
- Pressure ranges: 0 - 1,000 psi to 0 - 10,000 psi
- Output: 3.33 mV/V
- Accuracy: +/- 0.5 percent FSO
- Standard process connection: 1/2-20 UNF Jam bushing
- Standard electrical connection: Bendix PT02A-10-6P

The PT418 Series transducer is a +/- 0.5 percent sensor ideal for food or medical applications requiring simple installation, repeatability and reliability. The food grade oil fill material meets FDA requirements 21 CFR 178.3620, 21 CFR 172.878 and 21 CFR 573.680 for contact with food and medical products. The PT418 Series transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The PT418 comes equipped with an six pin Bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT418 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections, if desired.

Features:
- Accuracy of better than +/- 0.5 percent
- Oil fill meets FDA requirements
- DyMaxTM coated convoluted SST wetted parts
- 0 - 1,000 to 0 - 10,000 psi
- 3.33 mV/V FSO

Benefits:
- Reliable, repeatable pressure measurements
- Designed for extremely high process temperatures
- Ideal for medical and food applications
- Excellent abrasion resistance
- Wide variety of pressure ranges
- Easy to calibrate with local indicator

Specifications:
1) Performance characteristics:
- Output: 3.33 mV/V +/- 2.0 percent
- Input voltage: 10 Vdc recommended, 12 Vdc maximum
- Accuracy: +/- 0.5 percent FSO
- Repeatability: +/- 0.2 percent FSO
- Configuration: Four-arm bonded foil Wheatstone bridge strain gage
- Bridge resistance: Input: 345 Ohms minimum, Output: 350 Ohms +/- 10 percent
- Over pressure: 2 x FSO
- Zero balance: +/- 10 percent FSO
- Internal shunt calibration (R-Cal): 80 percent FSO +/- 1 percent
- Insulation resistance: 1000 megohms at 50 Vdc

2) Temperature and mechanical characteristics
- Max diaphragm temperature: 527 Degree F (275 Degree C)
- Zero shift (due to temperature change): 36 psi/100 Degree F typical (65 psi/100 Degree C)
- Electronics operating temperature: 250 Degree F (121 Degree C)
- Zero shift due to temperature change: +/- 0.05 percent FS/Degree F max (+/- 0.1 percent FS/Degree C max)
- Sensitivity shift due to temperature change: +/- 0.02 percent FS/Degree F max (+/- 0.04 percent FS/Degree C max)
- Mounting torque: 500 inch/lbs. maximum
- Standard wetted parts: Inconel 718

Dynisco's manufactures a wide variety of robust 3.33 mV/V melt pressure transducers, which are designed specifically for harsh and rugged environments of the extrusion and Polymer Processing Industries. Select from one of the many robust and reliable products offered on the market today. No matter what the pressure requirement, whether it is for safety reasons or control to help tighten product specifications, Dynisco can supply it.

(For picture, please see next page)

For More Details Contact:
Manan Enterprise
Mr. Yogesh Desai
Tel.: +91-22-26102833
Mobile: +919819301890
E-mail: manan@bom4.vsnl.net.in