Required - TTE - 2255 - Zero Degree Chamber
Specification
Reference Number
TTE - 2255Product
Zero Degree ChamberManufacturer
IndianProduct Details
Our Zero Degree Chamber is specially used to condition the R-PVC pipes at 0 Deg. C. For impact testing as per IS 4985 standard.
A true material comparison is possible only when property values are determined by identical test methods under identical conditions. Generally speaking, physical and mechanical properties of plastics and electrical insulating material are affected by temperature and humidity. Plastic materials tested above room temperature will yield relatively higher impact strength and lower tensile strength and modulus. Obviously, in order to make reliable comparisons of different materials and test results obtained by different laboratories, it is necessary to establish standard conditions of temperature and humidity for testing.
Features
- Microprocessor based temperature controller with PID action.
- Temperature - 20 to + 20 deg. C.
- Chamber size: 18* 18* 18 inch or as per requirement.
A true material comparison is possible only when property values are determined by identical test methods under identical conditions. Generally speaking, physical and mechanical properties of plastics and electrical insulating material are affected by temperature and humidity. Plastic materials tested above room temperature will yield relatively higher impact strength and lower tensile strength and modulus. Obviously, in order to make reliable comparisons of different materials and test results obtained by different laboratories, it is necessary to establish standard conditions of temperature and humidity for testing.
Features
- Microprocessor based temperature controller with PID action.
- Temperature - 20 to + 20 deg. C.
- Chamber size: 18* 18* 18 inch or as per requirement.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}