PTFE Resin for Paste Extrusion -LF-201
Item	LF-201
	Excellent	Grade A	Qualified
Smoothness&cleanness	White sheet surface, fiber is averagely , no gravel and metallic power, even sheet quality for mechanical impurity (0.5mm) or organic impurity(2mm).	White sheet surface, fiber is averagely , no gravel and metallic power, even sheet quality 1 for mechanical impurity (0.5mm) or organic imprity(2mm).	White sheet surface, fiber is averagely , no gravel and metallic power
Tensile strength (Mpa)	24.0	20.7	18.6
Elongation at Rupture(%)	350	350	350
Volume Density, (g/L)	475/100	475/100	475/100
Extrude pressure(Mpa)£¨RR100£º1£©	9.7 x 4.2	9.7 x 4.2	9.7 x 4.2
Average Grain	425 x 150	425 x 150	425 x 150
Moisture Content,(%)	0.04	0.04	0.04
Melting Point	327 x 5	327 x 5	327 x 5
Standard Relative Density	2.20	2.20	2.20
Thermal Instability Index.	50	50	50
Electrical Strength, MV/m	2.1
Dielectric Dissipation Factor	3 x 10-4
For check	For check, execute according to requirement of HG/T3028-1999
For fabrication	Paste Extrusion
Usage	It is suitable for plaster extrusion for making small-diameter, thin wall pipe, lead and cable, raw material tape, porous sealing material, etc..
Packing, Storage and transportation	PTFE is packed in double layer PVC bags inside and in hard circularbarrels outsides. On the barrel, there attached label and quality certificate, on whick there are brand, trademark, lot No. and net content=20kg. PTFE should be stored in clean fry warehouse to pervent form dust, moisture, etc, foreign matters. The products are transported according to non-dangerous products. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together.
		Next