FLEXO PRINTING PRESS
FOUR COLOUR 800 MM (WOVEN SACK) & UNWIND & REWIND MACHINE
WITH CARONA TREATING EQUIPMENT |
| 1 NO. UNWIND & REWIND MACHINE WITH CARONA TREATING
EQUIPMENT |
ONE INTEGRATED UNWIND UNIT:
Equipped with 1 No. Web Guiding System (Pneumo Hydraulic Trolley Type),
1 No. Manual Tension Control System consists of spring-loaded brake,
that helps Control the Unwind Tension, 1 No. Manual Unwind Shaft 76
mm, which is interlocked with the Manual brake at one end. |
PLATFORM BETWEEN UNWIND AND SLITTING STATION:
The Web is passed below the platform on support idlers; the platform
facilitates the accessibility to the Corona Treating section operation. |
GUIDE R0LLER:
The Guide rollers located between the unwind and rewind sections are
1050 mm wide balanced aluminum idler rollers. |
PRIMARY NIP STATION:
Consisting of one driven steel and one Manually operated
Rubber Roller linked to the main machine drive motor. The steel and
Rubber Roller are 1050 mm wide. The main 5-hp. dc drive motor drives
the in feed station. |
SIDE FRAME ASSEMBLY:
The side frame construction is of 30 mm thick Mild Steel Plates precisely
machined from all sides, and supported by sufficient crossbeams to
ensure perfect alignment and a vibration free performance. |
SURFACE REWIND STATIONS:
Consists of 1 No. “Surface” Rewind Station, maximum reel
outer diameter is 1000 mm, and maximum reel weight is 300 kgs. Rewinding
shaft supported by bearing on both sides. 1 No. Manual shaft with
reel cones for 76 mm core i.d. is provided. |
CORONA TREATING EQUIPMENT
1 No. Corona Treater will be provided on the top of the machine. The
web is passed through the Corona Treater so as to treat the surface
of the web. |
CONTROL PANEL:
1No.Control Panel consists of following controls.
* 1 No. Thyrister Drive suitable for 5-hp.dc. (Main)
* On – off switch for D.C. Motor.
* Miniature Circuit Breakers.
* Main Motor Pot.
* Contactors and overload relays.
* 1 No. Emergency Stop.
* 1 No. Auto Stop for break in web. |
Back |
Next |