| Technical Data | ||||
| Machine Type | P-20 | P-50 | P-70 | |
| Injection Unit | ||||
| Screw Diameter (M.M.) | 25-30 | 30-35 | 35-40 | |
| Max.Injected Weight(GMS.) | 42-62 | 85-116 | 125-165 | |
| Screw Stroke (M.M.) | 100+10 | 140+10 | 150+10 | |
| Screw Revolutions(Min-1) | 250 | 225 | 200 | |
| Plasticizing Capacity(KG/Hr) | 15-20 | 20-30 | 30-40 | |
| Heating Capacity (K.W.) | 3 | 3.5 | 4 | |
| No.of Heating Zone | 3 | 3 | 3 | |
| Clamping Type | ||||
| Clamping Type | Double Toggle | Double Toggle | Double Toggle | |
| Clamp Force (Ton) | 20 | 50 | 70 | |
| Mold Opening Stroke (M.M) | 200 | 250 | 300 | |
| Min.Mould Height(M.M) | 125 | 125 | 150 | |
| Max.Mould Height(M.M) | 250 | 300 | 325 | |
| Max. Daylight (M.M) | 450 | 550 | 625 | |
| Distance Between Tie Bar (HXV) | 225 x 225 | 275 x 275 | 325 x 325 | |
| Die Mounting Plate Size (HXV) | 375 x 375 | 425 x 425 | 525 x 525 | |
| Ejector Force Ton | 2.5 | 3.5 | 4 | |
| Ejector Stroke (M.M) | 65 | 70 | 85 | |
| General Data | ||||
| Pump Drive (KW) | 3.75 | 5.5 | 7.5 | |
| Total Electric Power(KW) | 6.75 | 9 | 11.5 | |
| Oil Tank Capacity (Lit) | 150 | 225 | 300 | |
| Net Weight (Without Oil)(Ton) | 1.5 | 2.25 | 3.5 | |
| Machine Dimension(M)(LxWxH) | 2.50x0.575x 1.2 | 2.75 x0.675x1.25 | 3x0.70x1.30 | |
 |
||||