PLASTICIZERS Product Specification Test Method DI-2ETHYL HEXYL PHTHALATE PDOP DI-BUTYL PHTHALATE PDBP(M) DI-ISO-BUTYL PHTHALATE PDIBP DI-ISO-DECYL PHTHALATE PDIDP DI-ISO-DECYL PHTHALATE PDINP DI-n-BUTYL PHTHALATE PD-n-BP DI-ETHYL PHTHALATE PDEP DI-METHYL PHTHALATE PDMP APPEARANCE PHYSICAL WATER WHITE CLEAR LIQUID Colour in Max Hazen Unit ASTM-D-1045-86 30 30 30 40 30 30 20 20 VOLATILE LOSS (130ºC for 3 hrs. % By Mass) Max. TM-P-11-92 0.1 0.1 (110ºC for 2 Hrs.) 0.1 (110ºC for 2 Hrs.) 0.1 0.1 0.1 (110ºC for 2 Hrs.) 0.1 (110ºC for 2 Hrs.) 0.1 (110ºC for 2 Hrs.) ACIDITY % (AS ACID) BY MASS, Max. ASTM-D-1045-86 0.01 0.01 0.01 0.01 0.01 0.01 0.015 0.02 ACIDITY AFTER HEAT TREATMENT (180ºC for2 Hrs.)% By Mass, Max ISI-9591-96 0.03 0.03 0.03 0.03 0.03 0.03 0.05 0.05 HEAT STABILITY AT 180ºC for 2 Hrs. ISI-9591-96 NO CHANGE IN COLOUR NO CHANGE IN COLOUR NO CHANGE IN COLOUR (150ºC,2 Hrs) NO CHANGE IN COLOUR NO CHANGE IN COLOUR NO CHANGE IN COLOUR (150ºC,2 Hrs) 50 Hu. (150ºC,2 Hrs) 50 Hu. (150ºC,2 Hrs) SPECIFIC GRAVITY AT 27ºC ASTM-D-1045-86 0.983±0.003 1.04±0.001 1.035±0.005 0.967±0.004 0.973±0.003 1.043±0.002 1.117±0.003 1.185±0.005 REFRACTIVE INDEX AT 27ºC ASTM-D-1045-86 1.486±0.002 1.492±0.003 1.492±0.003 1.4845±0.0015 1.487±0.002 1.4845±0.0015 1.507±0.002 1.512±0.004 ESTER VALUE (mg KOH/gm) ASTM-D-1045-86 287±3 385±9 402±3 251.5±2.5 267.5±2.5 403±3 503±3 575±3 ESTER CONTENT %BY WEIGHT, Min ASTM-D-1045-86 99.5 99.5 99.5 99.5 99.5 99.5 99.5 99.5 MOISTURE% BYMASS Max TM-P-12-98 99.5 99.5 99.5 99.5 99.5 99.5 99.5 99.5 VISCOSITY AT 20ºC IN CPS TM-P-13-97 82±2 23±2 34.5±1.5 108±2 79±3 21±2 12±2 - BOILING AT ATM.PR.(IN ºC) IS:5298-73 386 - 327 - 400 340 293 - IODINE VALUE MAXIMUM BRITISH-PHARM-88 - - - - - - - - Back