Central Institute of Plastics Engineering
& Technology (CIPET) is a premier institution devoted
to manpower training and technical services to the plastics
and allied industries. CIPET has been accredited with ISO
9001:2000 certification on "DESIGN,
DEVELOPMENT AND CONDUCT OF SPECIALIZED TRAINING COURSES IN
PLASTICS ENGINEERING & TECHNOLOGY AND RENDERING TECHNICAL/
CONSULTANCY SERVICES IN DESIGN, TOOLING, PLASTICS PROCESSING
& TESTING TO THE PLASTICS & ALLIED INDUSTRY".
CIPET was first established in 1968 at Chennai
under the Ministry of Chemicals & Fertilizers, Govt. of
India with the assistance of UNDP. Over the years, the need
and necessity of CIPET services was felt by various State
Govts. and extension centres were established at Ahmedabad,
Amritsar, Bhopal, Bhubaneswar, Hyderabad, Imphal, Lucknow,
Mysore, Hajipur, Haldia and Guwahati. Recently,
Planning Commission Government of India has approved establishment
of New CIPET Centres in States of Rajashthan, Maharashtra
and Haryana.
All CIPET centres have uniform infrastructure
facilities in the areas of Design-CAD/CAM, Tooling, Plastics
Processing, Testing & Quality Assurance under one roof.
CIPET conducts seven long term courses leading to Post Graduate
Degree (M.Tech.), Post Graduate Diploma, Post Diploma and
Diploma in various disciplines of Plastics Engineering &
Technology. The infrastructure facilities in terms of machineries,
equipments are continuously upgraded/modernised to match with
the technology development and needs of the industry globally.
CIPET has ambitious plans of extending its presence in South
East Asian and Middle East Countries. Asian Institute for
Development Studies, Manila (Phillipines), UNIDO - Nigeria
have enrolled CIPET as consultant for providing technical
and training services in Plastics Engineering & Technology.
Discussion with German, American, Malaysian and reputed Indian
Institutions are in progress for mutual co-operation/collaboration.
 |
| OBJECTIVES |
The objectives of CIPET are well in line with the
country’s plan for developing employment opportunities
for youth, self-employment and entrepreneur development.
To keep the industry abreast with the new technological
development and update the skill levels of the personnel
working in the industry, short term programmes, tailor made
programmes, modular training programmes, technical seminars
are conducted on Design, Tooling, Plastics Processing, Plastics
Testing and Quality Assurance.
a) Manpower Development
Since inception, CIPET has been providing dedicated service
to the plastics industries in India by providing Trained
manpower in different disciplines of Plastics Engineering
and Technology.
CIPET’s achievements with regard to long-term courses,
short-term courses & technical services are summarised
as follows: -
Long-term courses
Over the years, with the significant growth of
Petrochemical Sector in India, CIPET has played a consequential
role supplementing the growth of downstream plastics industries
by providing trained Manpower for the Plastics Industries
through Long-term courses in the field of Plastics Engineering
& Technology.
CIPET trainees are very well recognised by the
industry for Placement at different levels in India as
well as in other neighbouring countries such as, UAE,
Singapore, Malaysia, Saudi Arabia and in recent years,
demand for CIPET trained candidates in Europe, North America
and Australia is also increasing.
CIPET centres across the country offer following
long-term training courses in various disciplines of Plastics
Engineering & Technology.
| S.No. |
Title of the Course (Duration) |
Entry Qualification |
Max. Age |
| 1 |
Master of Technology in Plastics
Engineering (M.Tech-PE) – 2 years |
B.E./B.Tech./B.Sc., Engg. In Mech./
Chem./Prodn. /Polymer/Tool Engg./M.Sc. in Polymer
Science/Chemistry |
35 Years |
| 2 |
Post Graduate Diploma in Plastics
Engineering (PGD-PE) – 1 Year |
B.E./B.Tech./B.Sc.,
Engg. In Mech./Chem./Prodn./ Polymer/Tool Engg. |
26 Years |
| 3 |
Post Graduate Diploma in CAD/CAM
for Plastics Engineering (PGD-Cad PE) – 1 year |
B.E./B.Tech./B.Sc., Engg. In Mech./Chem./Prodn./
Polymer/Tool Engg. |
26 Years |
| 4 |
Post Graduate Diploma in Plastics
Processing & Testing (PGD-PPT) –1½
Years |
A 3 Year Degree in Science with
Chemistry |
24 Years |
| 5 |
Post Diploma in Plastics Mould Design (PD-PMD) –
1 Year |
A 3 Year Diploma in Mech/ Plastics Tech./Tool/ Plastics/
Prodn. Engg./CIPET DPMT/ Equivalent |
24 Years |
| 6 |
Post Diploma in Machine Maintenance (PD-MM) –
1 Year |
A 3 Year Diploma in Mech./ Elect./Electronics Engg./CIPET-DPMT/equivalent |
24 Years |
| 7 |
4-year integrated Dual Diploma/Post Diploma in Plastics
Mould Technology (DPMT/PD-PMT) |
X Std. With Maths, Science and English |
18 Years |
CIPET courses are very well accepted by plastics and
allied industries in India and abroad. CIPET qualified
graduates are offered employment in supervisory/ managerial
positions in different technical departments of plastics
conversion/ processing/tooling/raw material manufacturing
industries not only in India but also in South-East Asia,
Middle-East and North American countries. On successful
completion of CIPET course about 10% aspirants opt for
entrepreneurship.
CIPET has trained around 27,000 trainees till
date in different disciplines of Plastics Engineering
& Technology i.e. Mould Manufacturing, Design, Plastics
Processing, Testing & Quality Control and Machine
Maintenance. With the consistent growth of Plastics Industry
and manpower requirement. CIPET Alumnus are very well
placed in Supervisory & Managerial positions in Plastics
industry and working in different technical departments.
CIPET courses have created employment opportunities for
Engineering Graduates, Science Graduates, Diploma Holders
who after pursuing specialised courses of CIPET get absorbed
in plastic industries at different positions.
Short duration skill & technology upgradation courses
The Personnel/Executives from Plastics Industries
are trained by CIPET on all technological aspects i.e.
Tooling, Design & CAD, Plastics Processing, Testing
& Quality evaluation of Materials & products by
organising short-duration training courses, modular/tailor-made
courses with duration varying from 2 days to 4 weeks.
These programmes are well designed for the upgradation
of technical know-how & skill of the participating
personnel.
Topic/Course Title
Plastics Materials, Testing of Materials and Products
Injection Moulding
Blow Moulding
 |
Types of blow moulding
and processing variables for quality production |
|
Design & manufacturing of blow
moulds |
Extrusion Techniques
Tooling & Design
CAD/CAM/CAE
|
CAD/CAM using Pro-Engineer
/ Unigraphics / CATIA / I-Deas / Ansys / Moldflow |
|
Application of CAD/CAM in Mould/Product
Design |
Dates and duration of the programme can be viewed
in CIPET website www.cipetindia.com
Training for foreign nationals
To contribute towards the rapidly growing concept
of “globalisation”, CIPET offers training
to the students, technical personnel & executive from
the Industries of SAARC, GCC and Developing countries.
ILO, UNIDO/UNDP, sponsored trainees/ Fellows are trained
by CIPET in different field of Plastics Engineering & Technology.
Modular/Tailor-made programme
Modular training programmes and Tailor-made Courses
in the specific disciplines of mould design, CAD, Tooling,
Processing and Testing of plastics are organised for the
benefit of industrially sponsored personnel and entrepreneurs.
Entrepreneurship Development programme
Entrepreneur Development Programmes are organised
for potential entrepreneurs and to assist them to become
prosperous entrepreneurs. The entrepreneurs are provided
with adequate technical guidance for setting up of Plastics
based Industry.
b) Technical and consultancy services
Since inception, CIPET has been providing dedicated
service to the plastics industries in India by providing
Trained manpower in different disciplines of Plastics
Engineering and Technology.
CIPET’s achievements with regard to long-term courses,
short-term courses & technical services are summarised
as follows: -
Long-term courses
Over the years, with the significant growth of Petrochemical
Sector in India, CIPET has played a consequential role
supplementing the growth of downstream plastics industries
by providing trained Manpower for the Plastics Industries
through Long-term courses in the field of Plastics Engineering
& Technology.
CIPET trainees are very well recognised by the industry
for Placement at different levels in India as well as
in other neighbouring countries such as, UAE, Singapore,
Malaysia, Saudi Arabia and in recent years, demand for
CIPET trained candidates in Europe, North America and
Australia is also increasing.
CIPET centres across the country offer following long-term
training courses in various disciplines of Plastics Engineering
& Technology.
| S.No. |
Title of the Course (Duration) |
Entry Qualification |
Max. Age |
| 1 |
Master of Technology in Plastics
Engineering (M.Tech-PE) – 2 years |
B.E./B.Tech./B.Sc., Engg. In Mech./Chem./Prodn./Polymer/Tool
Engg./M.Sc. in Polymer Science/Chemistry |
35 Years |
| 2 |
Post Graduate Diploma in Plastics
Engineering (PGD-PE) – 1 Year |
B.E./B.Tech./B.Sc.,
Engg. In Mech./Chem./Prodn./Polymer/Tool Engg. |
26 Years |
| 3 |
Post Graduate Diploma in CAD/CAM
for Plastics Engineering (PGD-Cad PE) – 1 year |
B.E./B.Tech./B.Sc., Engg. In Mech./Chem./Prodn./
Polymer/Tool Engg. |
26 Years |
| 4 |
Post Graduate Diploma in Plastics
Processing & Testing (PGD-PPT) –1½
Years |
A 3 Year Degree in Science with
Chemistry |
24 Years |
| 5 |
Post Diploma in Plastics Mould Design (PD-PMD) –
1 Year |
A 3 Year Diploma in Mech/ Plastics Tech./Tool/ Plastics/
Prodn. Engg./CIPET DPMT/ Equivalent |
24 Years |
| 6 |
Post Diploma in Machine Maintenance (PD-MM) –
1 Year |
A 3 Year Diploma in Mech./ Elect./Electronics Engg./CIPET-DPMT/equivalent |
24 Years |
| 7 |
4-year integrated Dual Diploma/Post Diploma in Plastics
Mould Technology (DPMT/PD-PMT) |
X Std. With Maths, Science and English |
18 Years |
CIPET courses are very well accepted by plastics and
allied industries in India and abroad. CIPET qualified
graduates are offered employment in supervisory/ managerial
positions in different technical departments of plastics
conversion/ processing/tooling/raw material manufacturing
industries not only in India but also in South-East Asia,
Middle-East and North American countries. On successful
completion of CIPET course about 10% aspirants opt for
entrepreneurship.
CIPET has trained around 27,000 trainees till
date in different disciplines of Plastics Engineering
& Technology i.e. Mould Manufacturing, Design, Plastics
Processing, Testing & Quality Control and Machine
Maintenance. With the consistent growth of Plastics Industry
and manpower requirement. CIPET Alumnus are very well
placed in Supervisory & Managerial positions in Plastics
industry and working in different technical departments.
CIPET courses have created employment opportunities for
Engineering Graduates, Science Graduates, Diploma Holders
who after pursuing specialised courses of CIPET get absorbed
in plastic industries at different positions.
Short duration skill & technology upgradation
courses
The Personnel/Executives from Plastics Industries
are trained by CIPET on all technological aspects i.e.
Tooling, Design & CAD, Plastics Processing, Testing
& Quality evaluation of Materials & products by
organising short-duration training courses, modular/tailor-made
courses with duration varying from 2 days to 4 weeks.
These programmes are well designed for the upgradation
of technical know-how & skill of the participating
personnel.
Topic/Course Title
Plastics Materials, Testing of Materials and Products
Injection Moulding
Blow Moulding
|
Types of blow moulding
and processing variables for quality production |
|
Design & manufacturing of blow
moulds |
Extrusion Techniques
Tooling & Design
CAD/CAM/CAE
|
CAD/CAM using Pro-Engineer
/ Unigraphics / CATIA / I-Deas / Ansys / Moldflow |
|
Application of CAD/CAM in Mould/Product
Design |
Dates and duration of the programme can be viewed
in CIPET website www.cipetindia.com
Training for foreign nationals
To contribute towards the rapidly growing concept
of “globalisation”, CIPET offers training
to the students, technical personnel & executive from
the Industries of SAARC, GCC and Developing countries.
ILO, UNIDO/UNDP, sponsored trainees/ Fellows are trained
by CIPET in different field of Plastics Engineering & Technology.
Modular/Tailor-made programme
Modular training programmes and Tailor-made Courses
in the specific disciplines of mould design, CAD, Tooling,
Processing and Testing of plastics are organised for the
benefit of industrially sponsored personnel and entrepreneurs.
Entrepreneurship Development programme
Entrepreneur Development Programmes are organised
for potential entrepreneurs and to assist them to become
prosperous entrepreneurs. The entrepreneurs are provided
with adequate technical guidance for setting up of Plastics
based Industry.
|
Application development
and applied research in all disciplines of plastics
Engineering & |
| |
Technology |
|
Testing and standardisation for
plastics materials and products |
|
Setting up of plastics based industry
from concept to commercialisation stage |
|
Design and development of moulds
and dies |
|
Material selection for new product
substitution |
|
Machinery and equipment selection |
|
Setting up of testing laboratories |
|
Setting up of tool room/processing
industries |
|
Introduction to modern technology
in plastics processing |
|
Technical Support to the industry
in product design/mould design, |
|
product failure analysis with the
help of CAD/CAM/CAE. |
Major Consultancy projects accomplished by CIPET
Few of the major consultancy industries who have
utilised CIPET services in the recent past.
| 1 |
Haldia Petrochemicals
Ltd. |
- |
Consultancy on Quality
Control & Testing of Plastics Materials for different
applications and grades. |
| 2 |
Indian Petrochemicals Corpn.
Ltd (IPCL) |
- |
Testing of raw material, finished
products and material evaluation for application development. |
| 3 |
Reliance Industries Ltd. |
- |
Testing of raw material, finished
products and material evaluation for application development |
| 4 |
National Organic Chemicals
Industries Ltd. (NOCIL) |
- |
Testing of raw material, finished
products and material evaluation for application development |
| 5 |
Ford India Ltd. |
- |
Testing of products and material |
| 6 |
Royal En Field Ltd. |
- |
Design and development of mould |
| 7 |
Brakes India Ltd. |
- |
Application/material development |
| 8 |
Hindustan Teleprinters Ltd. |
- |
Moulding services for manufacturing
ABS components |
| 9 |
Optel Telecommunication
Ltd., |
- |
Design and development of moulds
and Moulding services for manufacturing injection
moulding components |
| 10 |
Indian Space Research Organisation
(ISRO) |
- |
Design & development of tooling |
| 11 |
National Mineral Water Compnay
(SAOG), Oman |
- |
Review of Project Report on Stretch
Blow Moulding for Mineral Water Bottling. |
| 12 |
Tamilnadu Industrial Investment
Corporation (TIIC) |
- |
Technical feasibility appraisal
on setting up of a mould manufacturing unit |
| 13 |
Reem Batteries Co., Oman |
- |
Consultancy on setting up of injection
moulding unit |
| 14 |
Ener Plastics, U.A.E. |
- |
Training & Consultancy on plastics
processing & testing |
| 15 |
Sintex Industries Ltd. |
- |
Consultancy on polyethylene material |
| 16 |
National Small Industries
Corporation Ltd. |
- |
Consultancy on machine selection
and inspection |
| 17 |
G M Pens International Ltd. |
- |
Computer aided analysis of Pen barrel |
| 18 |
Lucas TVS Ltd. |
- |
Product design and CAE analysis
of automotive components |
| 19 |
Indian Telephone Industries
(ITI) Ltd. |
- |
Consultancy on ABS telephone housing
and line cord |
| 20 |
Sri Lanka – German
Private Sector Project (PSP) |
- |
Technical consultancy on plastic
industries |
| 21 |
M/s. Jain Irrigation System
Ltd., Jalgaon |
- |
Technology Evaluation of Polycarbonate
Sheet Extrusion Plant. |
| 22 |
Optical Fibre Research Centre,
University of Sydney (Australia) |
- |
Technical know-how/training on “Plastics
– Processing & Testing” |
| 23 |
Advanced Business Consultants
(ABC), Muscat, (Oman) |
- |
Joint Consultancy Assignment on
“Plastics Sector Study in Oman”. |
| 24 |
GAIL, Noida |
- |
Third Party Quality Audit of Hydrocarbon
and Petrochemical Products |
| 25 |
Oil India Ltd., Guwahati |
- |
Third party inspection of HDPE Telecom
Duct for OFC application |
| 26 |
Export Inspection Council
(EIC), Ministry of Commerce, Govt. of India |
- |
Testing of UPVC/HDPE pipe for export
to Srilanka |
| 27 |
Gulf Organisation for Industrial
Consulting (GOIC), Qatar. |
- |
Technical knowhow/Training on Plastics
Processing |
| 28 |
Export Development Board,
Government of Srilanka |
- |
Technical knowhow/Training on Plastics
Processing |
| 29 |
TIFAC, Department of Science
and Technology, Government of India |
- |
Testing of Bamboo Based composite
products |
|
|
| RESEARCH & DEVELOPMENT ACTIVITIES |
In the fast changing technology scenario, CIPET is focussing on R&D activities in the following major
areas |
|
Development of Blends, Alloys, Composites and Nanocomposites |
|
Development and evaluation of materials and products for newer applications; |
|
Development of innovative applications in the field of electronics, telecommunications, transport, |
| |
engineering, housing, packaging, agriculture and water management |
|
Plastics Recycling & Waste Management Technologies; |
|
Development of bio-degradable Polymers and testing & evaluation. |
|
|
Some of the R&D projects undertaken by CIPET are mentioned below:
|
| S.No. |
Title of Project |
Project Objectives |
| 1 |
Development of Bitumen packaging polybags in association with CRRI, New Delhi |
Application development of appropriate material/blend for producing polybags for Bitumen packaging |
| 2 |
Development of mechanically and thermally stables biodegradable plastic composites. |
The project envisages to develop biodegradable polymer composites prepared from natural fibres and biodegradable plastics matrices |
| 3 |
Effect of Nanofillers on the performance of Thermoplastic Nanocomposites |
To Study the properties and performance of Nanocomposites with Nanofillers. |
| 4 |
Development of High Performance Thermoplastics & Thermosetting Nanocomposites |
To Develop different types of thermoplastics and thermosetting based Nanocomposites for High performance applications |
| 5 |
Processing of high performance polymer blends and nano-composites. |
Processing, Rheological behaviour of high performance materials such as PEEK, PES, etc. filled with nano-fillers |
| 6 |
Development of polyolefin based nanocomposites. |
The project envisages to develop and characterise polyolefin based nano-composites and study the commercial viability of the developed composites. |
| 7 |
Development of Bio-degradable film and evaluation of bio-degradability of the film |
Development & Evaluation of Developed Bio-degradable film as per International Standards |
| 8 |
Optimisation of Materials and Properties for the development of shoulder pad, front and firing grips using Nylon-6 used in Defence applications |
Project aims at Developing products for defence applications as mentioned in project title |
| 9 |
Life assessment of Tubular Composite structures used in Defence applications |
Project aims at life cycle analysis of composite structures for Defence applications |
| 10 |
Development of Contour Plastic Welding System for Disposable NBC Suit. |
The project envisages development of various sealing methods for fabrication of sample suits and various contours. |
| 11 |
Design & Development of Modular Prosthetic Appliances. |
The R&D project has been undertaken with the objective to design and develop modular below knee and above knee prosthetic appliances. The project has been taken in collaboration with Rotary Mysore Mahaveer Artificial Limb Centre, Mysore & District Rehabilitation Centre, Mysore . |
| 12 |
Development of FRP Engine & Nozzle containers. |
The developmental project's objective includes the design and development of FRP engine containers, nozzle containers to be used for liquid propulsion systems. |
| 13 |
Development of Carbon Black Filled LDPE based master batches. |
This project has been carried out for M/s. Sun Petrochemicals Ltd., Mumbai with the objective to develop carbon black field LDPE masterbatches. |
| 14 |
Development of Bubble Dosimeter |
The project for development of Bubble Dosimeter has been undertaken for Defence research laboratory. |
| 15 |
Replacement of Metallic parts at direct action hand pump to plastics with special emphasis on corrosion of part in coastal areas. |
The project has been successfully completed with objectives to produce corrosion resistant parts for use in coastal areas. |
| 16 |
Development of FRP Boats |
The project has been successfully completed for Defence application. |
| 17 |
New curing systems for thermoplastics toughened, thermoset epoxies. |
The project is an Indo-US Joint Initiative to develop silicon based multifunctional epoxies and curing agents to investigate Tg values and other properties with and without thermoplastics modifiers. |
| 18 |
Development of Gas assist system for the conventional injection moulding machines |
The main objective of the project is to develop simple and indigenous system for gas-assist injection moulding for various end-use applications. |
|
CIPET's Interactions
a) Interaction with Bureau of Indian Standards (BIS) and International Organization for
Standards (ISO): |
Testing, Quality Control & Standardization have been one of the core objectives of CIPET's technical services to the plastics and its allied industries in the country. For the past few years, CIPET has consolidated its interaction with Bureau of Indian Standards (BIS) and International Organization for Standards (ISO) in standard development activities pertaining to plastic materials and products. CIPET officials are represented in various Sectional Committees as well as Sub-committees of BIS. Director General, CIPET has been nominated as Chairman for 02 important BIS Sectional Committees i.e. CED 50 (Plastics Piping System Sectional Committee) & PCD 12 (Plastics Sectional Committee). Also, CIPET officials are represented in 13 different Sectional Committees and actively participated in the meetings/deliberations pertaining to testing & quality assurance of plastic materials and products.
As a result of participation of CIPET at ISO TC 61– “Plastics” meetings, Director General, CIPET has been nominated as a Member of Task Group comprising Members from Canada , USA , U.K. and Japan by ISO TC 61/WG-2 for “Terminology on Recycling”. Also, CIPET is participating in the International Ring Test Committee for formulating an ISO Standard for testing of Biodegradability of plastics materials & products.
a) Interaction with National Mission on Bamboo Applications (NMBA), Government of
India.
National Mission on Bamboo Applications (NMBA), India was launched with the initiatives of Planning Commission and Technology Information Forecasting and Assessment Council (TIFAC), Government of India in the year 2003, with the objectives to devise a roadmap/action plan for development of Bamboo Sector in the Country. CIPET has been actively involved as a Mission Partner with NMBA/ TIFAC for exploring possibilities of developing bamboo based polymer composite products inline with the contemplated vision of Government of India to exploit the potential of natural resources like Bamboo across the country. TIFAC/NMBA has been utilisting CIPET's services for testing of various of types of Bamboo based products.
Reckoning the potential of Bamboo fibres as reinforcing filler in thermoplastics materials like PP & PE NMBA sought CIPET's collaborative assistance in validation of process and technology for Bamboo fibre reinforced thermoplastics. NMBA recognised CIPET as the nodal agency for product development, testing, technology adaptation and subsequent transfer of technology to entrepreneurs, since CIPET has excellent infrastructure, expertise and testing facilities under one roof.
C) Interaction with Overseas Institutions / Industries
The capabilities and capacities of CIPET are being extended to SAARC, Gulf & Middle-east countries, Southeast Asian Countries, through organising training programmes & by providing technical consultancy services.
CIPET has entered into an MoU with M/s. Q-Panel , USA for setting up of Calibration facility at CIPET – Lucknow to carry out the Calibration of equipments / instruments jointly by CIPET and M/s. Q-Panel Lab Products in South-East Asia.
PUBLICATIONS
|
“International Journal of Plastics Technology (IJPT)” published by CIPET has attained International |
| |
recognition and appreciation from Institutions of developed countries like National Research Council , |
| |
Canada ; RAPRA Technology , UK : University of Auckland , New Zealand . IJPT is abstracted by |
| |
Chemical Abstract Services (CAS) of American Chemical Society, USA and RAPRA Abstracts, UK. |
|
CIPET Bulletin – a quarterly magazine” published regularly with technical articles, latest technological |
| |
information in the field of Plastics Engineering & Technology and synopsis on new developments. |
CIPET Institutional Membership |
With a view to move close together and further the interaction with industries, CIPET propose to register membership from the Industries, Institutions and Professional bodies. CIEPT welcomes
membership for mutual benefit. The objectives of Institutional Membership are as follows |
|
Closer interaction between Industry and CIPET |
|
Disseminate technological developments in plastics engineering & technology to face |
| |
increasing competition globally. |
|
Better utilisation of CIPET capabilities & Services |
|
Exchange technical information |
|
Continuously monitor the quality of services provided by CIPET |
|
Continuos improvement in services through modernisation |
|
Institutional Membership Norms
CIPET Institutional Membership is in three categories as follows:
|
| Category |
Industries/Associations/Institutions |
Fees (Amount in Rupees) |
| |
|
Annual |
Life |
| 1 |
Tiny, Small Scale Industries, Institutions like Engineering Colleges , Polytechnics, Industry Associations and Bodies. |
2,000 |
10,000 |
| 2 |
Medium Scale Industries |
5,000 |
5,000 |
| 3 |
Large Scale Industries and the Corporate Sector. |
10,000 |
2,00,000 |
|
Vision of CIPET
CIPET envisioned to become an apex institution of International repute and assist small and medium enterprises (SMEs) to successfully meet the global challenges in post WTO scenario through training and technology support.
|
|
Assist small and medium scale industries in India to constantly upgrade technology and |
| |
manufacturing processes as to successfully face increasing global competition |
|
Constantly enhancing capacity utilisation of testing, processing/job working, tool room and |
| |
CAD/CAM facilities also through efficient costing and pricing modes. |
|
Collaboration with national and international institutions for faculty and student exchange. |
|
Attainment of Deemed University status for providing graduate & post graduate degrees to |
| |
students of specific long-term programmes. |
|
Business Development Cell (BDC) and Customer Service Centre (CSC) to be firmly established at |
| |
CIPET to foster growing industry requirements. |
|
Pursue Joint Ventures with plastic processing units, testing units and machinery, equipment and |
| |
instrument manufacturers. CIPET's contribution could cover installation, commissioning, training |
| |
and machine maintenance. |
|
Explore and pursue overseas consultancy assignments vigorously as to extend reach and scale of |
| |
activities and also enhance income generation. |
|
Establishing an Application Development Centre: Explore newer application for polymer blends, |
| |
alloys, composites, nanocomposites, recyclates etc. |
|
Recycling of plastics and application development of value added recyclates as well as waste |
| |
management. |
|
Design and development of modular prosthetic appliances at commercially competitive costs. |
|
Establishment of CIPET centres in other underdeveloped regions-South Africa , SAARC, Gulf |
| |
Countries Council (GCC) and common wealth countries. |
|
CIPET to attain the status of certifying and inspection agency for various State and Central Govt. |
| |
agencies pertaining to plastics and allied products for establishing best manufacturing practices. |
|
CIPET would focus on mould making with updated CNC machines contributing to import |
| |
substitutions, saving of foreign exchange and growth of the economy of the country. |
|
Conduct of Entrepreneurship Development Programmes (EDPs) through NGOs with the financial |
| |
assistance from Industrial Development & Financial Institutions. |
|
As the support and service institution, CIPET's mission is to augment interaction with the user industry and entrepreneur for mutual benefit. CIPET would be targeting to embrace wide range of activities in extending technical assistance to the industry to make them competitive and techno-commercially viable in the global market place. |
|
|
| CONTACT US |
|
|
|
