Plastic Processing Machinery Manufacturer for Pipe Extrusion, Blown Films and Blow Moulding

About Us
The company set up operations at Thane (near Mumbai) in 1964 under collaboration with R. H. Windsor of U.K. In 1984, Klockner-Werke of Germany made the company a part of its world-wide operations and renamed it Klockner Windsor India Limited. Subsequent to the disinvestment of equity by Klockner to Mr. Dilip G. Piramal in 1994, the company acquired the status of being member of one of India's largest business houses, the DGP Group, and was initially named as DGP Windsor India limited, since year 2005 been renamed as WINDSOR MACHINES LIMITED.
Windsor by virtue of its long history and extremely high technical competence has established itself as a sound global player in the field of extrusion machinery. Thanks to the erstwhile technical collaborations and its continuous R&D that helped Windsor create a satisfied customer base around the globe.
Windsor's unique philosophy of working on customers' profits has earned the company accolades for being a machinery supplier with lowest running cost (per kilo of polymer produced).

 

Products

   Blown Film Lines

CROWN Series - Monolayer Blown Film Plant
Crown Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm.
General Applications
» Shopping bags, Grocery bags, T-shirt bags etc.
» Liners & lamination film for aluminium foil, jute paper and board
» Liner for woven sacks, Cans and other industrial needs
» Refuse bags, diaper films, packaging of diary products
» Green house films, packaging of frozen foods
» Bags and Pouches for fruits, Vegetables, Groceries, Refuse bags etc.
» Wrappers for food products, Laundry etc.
» Heat sealed sterilized packages for surgical instruments
» Health Care packaging
» Garment bags and fresh producing packaging
» Courier bags 		CROWN Series - Monolayer Blown Film Plant

DUKE Series (Non IBC) - Three Layer Blown Film Co-Extrusion Lines
Duke was the first model of Multilayer co-extrusion Blown Film Plant manufactured in India with German technology way back in 1994. This non IBC three layer line works with effective “layer ratio concept.” The maximum output is 250 kg/hr with a film width of 2100 mm. Extruder range: 50 mm, 55 mm & 60 mm. Winder capacity 800 mm dia x 400 kg weight of the film roll.
General Applications
» Milk film
» Tea packaging
» Rice packaging
» Tomato catch up packaging
» Liquid packaging
» Oil film
» Lamination film
» Stretch cling film 		DUKE Series (Non IBC) - Three Layer Blown Film Co-Extrusion Lines

REX Series (IBC) - Three Layer Blown Film Co-Extrusion Lines
REX is the first of its kind Multilayer Co-extrusion Blown Film Plant manufactured in India in technical collaboration with Kuhne GmbH in 1997. This IBC three layer co-extrusion blown film line works with effective Layer Ratio Concept with output of maximum 650 kg/hr & with maximum film width of 2700mm. Fully automatic winder with auto change over of rolls, capacity 1000mm dia x 1000 kg weight of the film roll & maximum line speed of 150. Range of Extruders: 55mm, 60mm, 75mm, 90mm & 120mm.
General Applications
» Milk film
» Tea packaging
» Rice packaging
» Tomato catch up packaging
» Liquid packaging
» Oil film
» Lamination film
» Stretch cling film 		REX Series (IBC) - Three Layer Blown Film Co-Extrusion Lines

BARON Series (Non IBC / IBC) - Five Layer Blown Film Co-Extrusion Lines
An excellent Five Layer co-extrusion Blown Film Plant with optional IBC and non IBC made in technical collaboration with Kuhne GmbH which is capable of processing Nylon & EVOH. Change over from five layer to three layer film with minimum wastage output ranging from 150 to 300 kg/hr on five layer film, 150 to 350 kg/hr on three layer film.
General Applications
» Frozen meat and fish packaging
» Edible oil packaging
» Coffee packaging
» Almond oil packaging
» Pickle packaging
» Ghee packaging
» Hair oil packaging
» Tomato catch up packaging 		BARON Series (Non IBC / IBC) - Five Layer Blown Film Co-Extrusion Lines
Top

   Pipe Extrusion Lines

KTS Series - Twin Screw Pipe Extrusion Lines for PVC
PVC being a heat sensitive material necessitates a very controlled temperature during processing. This is best possible with closely intermeshing twin screw extruder with relatively less power as compared to single screw. Windsor twin screw extruders are known for the power optimisation and are offered in the range from 110 kg/hr up to 900 kg/hr.
General Applications PVC
» Supplying potable water for rural and urban places
» Casing and column pipes for bore well
» City sewage Pipes
» Domestic plumbing
» Effluent discharge lines
» Electrical conduits
» Sprinkler irrigation system
» Inside housing telecom connections
KTS Series - Twin Screw Pipe Extrusion Lines for PVC  

Downstream for Twin Screw Extruder for PVC
WINDSOR offers spider dies, right up to 630 mm dia with single head, also dual and quadruple head.
Technical Specifications
- Single Pipe Die Head
- Multiple Pipe Die Head with Single Downstream Equipment
- Dual Pipe Die Head with Dual Downstream Equipment
- Cooling Tank for Single Downstream Equipment
- Cooling Tank for Dual Downstream
- Traction Unit for Single Downstream
- Traction Unit for Dual Downstream
- Cutting Unit for Single Downstream
- Cutting Unit for Dual Downstream
- Planetary Cutting Unit (PCU)
 Downstream for Twin Screw Extruder for PVC  

LX Series - Single Screw Pipe Extrusion Lines for PE/PPR/ABS
General Applications for HDPE
» Potable water
» Waste water
» Slurries
» Compressed gases as well as oils
» Telecom ducts
General Applications for PPR
» Extreme cold & hot water transportation
» Chemicals and Hazardous waste
» Industrial, i.e. transportation of corrosive fluids (like acids) and liquid foods etc.
» Agriculture and Horticulture
» Compressed air plants
» Swimming pools
» Rain Water harvesting and utilization systems
General Applications for ABS
» Capable of handling a wide variety of fluids from refrigerants to moderately hot corrosive liquids
» Transportation of wide range of acids, alkalis
» Slurries
LX Series - Single Screw Pipe Extrusion Lines for PE/PPR/ABS  

Downstream for Single Screw Extruder for PE/PPR/ABS

Technical Specification
- Special Co-extrusion Die Heads
- Cooling Tank for Single Downstream Equipment
- Traction Unit for Single Downstream
- Cutting Unit for Single Downstream
- Planetary Cutting Unit (PCU)
- Coiling Unit
 Downstream for Single Screw Extruder for PE/PPR/ABS  

   Blow Moulding Machines
Windsor's KBM series Blow Moulding Machines are the most reliable, performing and efficient. KBM 20, KBM 30 and KBM 50 are being in the domestic and international market for more than two decades, reaping profits continuously to customers. These KBM series machines are being upgraded at regular intervals for productivity, ease of maintenance and operator friendliness.
General Applications
» Edible oil packaging
» Lubricants packaging
» Packaging of drinking water
» Pharmaceuticals packaging
» Chemicals packaging
» Pesticides and insecticides packaging
» Automobile components
» Toys
Blow Moulding Machines

   Injection Moulding Machines

Sumo Smart

50 tons-350 tons

Sumo Smart RPVC

75 tons-350 tons

Sumo Smart RPVC

50 tons-350 tons

Sumo Shakti
50 tons-350 tons

Mark

100 tons-350 tons

Mark RPVC

100 tons-350 tons

Mark Ranger

180 tons-250 tons
 

Sprint
450 tons-20000 tons

Sprint RPVC

450 tons-13300 tons

Sprint TC

450 tons-13300 tons
 

Castle
50 tons-350 tons
 

Armour
50 tons-350 tons
Products: Monolayer Blown Film Plant | DUKE Series (Non IBC) Three Layer Blown Film Co-Extrusion Lines
REX Series (IBC) Three Layer Blown Film Co-Extrusion Lines | Five Layer Blown Film Co-Extrusion Lines
Twin Screw Pipe Extrusion Lines for PVC | Downstream for Twin Screw Extruder for PVC
Single Screw Pipe Extrusion Lines for PE/PPR/ABS | Special Co-extrusion Die Heads
Cooling Tank | Traction Unit | Cutting Unit | Coiling Unit | Blow Moulding Machines
Top
Contact Us
Company Name
Windsor Machines Limited, Extrusion Division
Contact Person Mr. Manoj Prakash
Address

5403, Phase IV, GIDC Vatva, Ahmedabad - 382 445, INDIA
Contact Number
+91 79 40 200 200, +91 40 200 238, +91 79 2584 1017, 2584 1591/2/3, Intl.- +91 79 40 200 300,
Contact Number
+91 79 25842059, Intl.- +91 79 25842145
Email
Website
www.windsormachines.com
Enquiry
Close Window
Hosted and Maintained By
www.plastemart.com
About Us Products Contact Us