Manufacture, Distribution, Import and Export of Polymers and Additives |
 |
 |
|
 |
Intercontinental Polymer Private Limited (IPPL) is an indo-American joint venture involved in the manufacture, distribution, import and export of a wide range of Polymers and Additives. IPPL offers customized, product-specific compounds and provides the highest value proposition to its customers. As a group, the company delivers total solutions right from product design & development to mold flow analysis, tool design, fabrication and molding.
Located in Daman, Indias cost-effective Union Territory, IPPL has been operating under the aegis of a highly professional team of chemical and plastics engineers who have a combined experience of over 45 years in the field. After exploring the rising potential of engineering thermoplastic compounds in India and the world, IPPL has enhanced its capacity by installing the most technically- advanced manufacturing lines. The facility incorporates a fully computerized quality system for monitoring and maintaining consistency at every stage and is backed by a ultramodern testing laboratory. IPPL has associate manufacturing units In USA, Canada, Mexico and China. This helps the company in meeting requirements of engineering thermoplastic compounds in any corner of the world- at competitive prices. For applications in IT, Automobiles, Electrical, Electronics, white Goods and Telecommunication, IPPL also offers complete technical support.
Manufacturing Facilities
Computerised Twin Screw Extruder, Universal Testing Machine, Analogue Izod / Charpy Impact Tester, Melt Flow Index Tester
|
 |
Engineering Plastic Compounds |
Polyamide (Nylon) 66 33% Glass Filled - IPLON |
Product: NYLON 66 - 33% Glass Filled
Grade: N6633GFBK
Colour: Black
|
PROPERTY |
TEST METHOD |
UNIT |
VALUE |
Specific Gravity |
ASTM D |
792 |
----- |
1.39 |
Heat Deflection Temp |
ASTM D |
648 |
at 18.5 Kg/cm² |
220°C |
Tensile Strength at yield |
ASTM D |
638 |
MPa |
170 |
Elongation at break |
ASTM D |
638 |
% |
6 |
Flexural Strength |
ASTM D |
790 |
MPa |
190 |
Modulus of Elasticity (Flexural) |
ASTM D |
790 |
MPa |
6500 |
IZOD Impact Strength |
ASTM D |
256 |
kg cm/cm of Notch |
8/20 * |
|
|
|
* Conditioned Test Specimen
Note: The Values stated above are indicative only, based on our knowledge and experience. These do not constitute a warranty
Processing Conditions
• Pre-Drying Temperature / Time: 80° 100° C / 2 - 4 Hours
• Recommended Melt Temperature: 200° 325° C (Nozzle)
• Recommended Mold Temperature: 80° C
• Injection Pressure: High; Low Back Pressure
• Injection Speed: Medium to High
Applications:
Automotive Parts, Electrical & Electronic Components, Bobbins, Switch Gears, Furniture & Fixtures, Housings of Hand Tools |
|
Polyamide (Nylon) 6 - 30% Glass Filled - IPLON |
Product: NYLON 6 - 33% Glass Filled
Grade: N630GFBK
Colour: Black |
PROPERTY |
TEST METHOD |
UNIT |
VALUE |
Specific Gravity |
ASTM D |
792 |
----- |
1.36 |
Heat Deflection Temp |
ASTM D |
648 |
at 18.5 kg/cm² |
220°C |
Tensile Strength at yield |
ASTM D |
638 |
MPa |
165 |
Elongation at break |
ASTM D |
638 |
% |
7 |
Flexural Strength |
ASTM D |
790 |
MPa |
180 |
Modulus of Elasticity(Flexural) |
ASTM D |
790 |
MPa |
6000 |
IZOD Impact Strength |
ASTM D |
256 |
kg cm/cm of Notch |
10/22 * |
|
* Conditioned Test Specimen
Note: The Values stated above are indicative only, based on our knowledge and experience. These do not constitute a warranty
Processing Conditions
• Pre-Drying Temperature / Time: 80° 100° C / 2 - 4 Hours
• Recommended Melt Temperature: 200° 325° C (Nozzle)
• Recommended Mold Temperature: 80° C
• Injection Pressure: High; Low Back Pressure
• Injection Speed: Medium to High
Applications:
Automotive Parts, Electrical & Electronic Components, Bobbins, Switch Gears, Furniture & Fixtures, Housings of Hand Tools |
|
|
PPO Glass Fiber Reinforced - IPTHER |
Product: PPO 30% Glass Filled
Grade: PPO30GFBK
Colour: Black |
PROPERTY |
TEST METHOD |
UNIT |
VALUE |
Specific Gravity |
ASTM D |
792 |
----- |
1.30 |
Heat Deflection Temp |
ASTM D |
648 |
@18.5 Kg/cm² |
140°C |
Tensile Strength at yield |
ASTM D |
638 |
MPa |
100 |
Elongation at break |
ASTM D |
638 |
% |
1.5 |
Flexural Strength |
ASTM D |
790 |
MPa |
125 |
Modulus of Elasticity (Flexural) |
ASTM D |
790 |
MPa |
6000 |
IZOD Impact Strength |
ASTM D |
256 |
kg cm/cm of Notch |
25 * |
|
* Un-Notched
Note: The Values stated above are indicative only, based on our knowledge and experience. These do not constitute a warranty
Processing Conditions
• Pre- Drying Temperature / Time: 100° - 120° C / 2- 4 Hours
• Recommended Melt Temperature: 280° 300° (Nozzle)
• Recommended Mold Temperature: 80° 120° C
• Injection Pressure: Medium; Low Back Pressure
• Injection Speed: Medium
Applications:
Meter Housings, Appliance Housings, Underwater Applications such as Pump Parts |
|
|
PBT Antistatic/Glass Reinforced - IPLITE |
Product: PBT 30% Glass Filled
Grade: PBT30GFN
Colour: Natural |
PROPERTY |
TEST METHOD |
UNIT |
VALUE |
Specific Gravity |
ASTM D |
792 |
----- |
1.53 |
Heat Deflection Temp |
ASTM D |
648 |
at18.5 Kg/cm² |
205°C |
Tensile Strength at yield |
ASTM D |
638 |
MPa |
125 |
Elongation at break |
ASTM D |
638 |
% |
3 |
Flexural Strength |
ASTM D |
790 |
MPa |
195 |
Modulus of Elasticity (Flexural) |
ASTM D |
790 |
MPa |
7500 |
IZOD Impact Strength |
ASTM D |
256 |
kg cm/cm of Notch |
8 |
|
Note: The Values stated above are indicative only, based on our knowledge and experience. These do not constitute a warranty
Processing Conditions
• Pre-Drying Temperature / Time: 80° 100° C / 2 4 Hours
• Recommended Melt Temperature: 200° 275° (Nozzle)
• Recommended Mold Temperature: 80° C
• Injection Pressure: Medium; Low Back Pressure
• Injection Speed : Medium
Applications: Electrical Insulation, MCB / ELCH Components, Coil Formers, Bobbins, Housings For Lighting & Appliances, Pump Housings, Textile Components |
|
|
PP Glass Fiber Reinforced - IPYLENE |
Product: PP - 20% Talc Filled
Grade: PP20TBK
Colour: Black |
PROPERTY |
TEST METHOD |
UNIT |
VALUE |
Specific Gravity |
ASTM D |
792 |
----- |
1.04 |
Heat Deflection Temp |
ASTM D |
648 |
at 18.5 Kg/cm² |
70° C |
Tensile Strength at yield |
ASTM D |
638 |
MPa |
32 |
Elongation at break |
ASTM D |
638 |
% |
12 |
Flexural Strength |
ASTM D |
790 |
MPa |
40 |
Modulus of Elasticity (Flexural) |
ASTM D |
790 |
MPa |
2440 |
IZOD Impact Strength |
ASTM D |
256 |
kg cm/cm of Notch |
4.5* |
|
* Conditioned Test Specimen
Note: The Values stated above are indicative only, based on our knowledge and experience. These do not constitute a warranty
Processing Conditions
• Pre- Drying Temperature / Time: 50° C / 2hours
• Recommended Melt Temperature: 200° 250° (Nozzle)
• Recommended Mold Temperature: 40° 45° C
• Injection Pressure: Medium; Low Back Pressure
• Injection Speed: Medium
Applications:
Automobile Components, Furniture, Pump Housings Washing Machine Components Defense Applications
|
|
|
Other Products |
• Acrylics
• Thermoplastic Polyester Elastomer
• CA, CAB, CAP
• Hydrocarbon Resin
• PVC Impact Modifier
• PET - Glass filled
• Sulpho Polymer |
|
|
 |
|
|