 |
 |
|
 |
 |
 |
CONTROL UNIT
 |
Microprocessor based control |
|
|
Proportional pressure & speed set digitally from M.M.I |
|
Hydraulic oil temperature display |
|
Data storage memory for 30 Moulds |
|
Adaptive P.I.D. temperature control of all zones |
|
Heaters can be programmed proportional or ON/OFF |
|
Calibration of all analog inputs through digital settings |
|
Core pulling with 6 different programs |
|
Specification of various process parameters with 3 sigma limits |
|
4 level password facility provided |
|
Production count for four and shift |
|
Hourly production history for last 1 month |
|
Running function display |
|
|
Fault diagnosis display on M.M.I |
|
|
Cycle time graphical chart |
CLAMPING UNIT
|
3 Stage mould open / close speed |
|
Moulds safety pressure proportional |
|
Programmable hydraulic ejector in multiple stages |
|
Linear variable transducer for mould open / close stroke control |
|
Pressure, transducer for clamping force control |
INJECTION UNIT
|
Injection speed profiling, 5 stages |
|
Hold on pressure profiling, 4 stages |
|
Refill speed profiling, 3 stages |
|
Screw position control by linear variable transducer |
|
Screw rotation by direct drive hydraulic motor |
|
Suck back before refill & after refill |
|
Auto sprue break |
|
Proportional back pressure position based |
HIGH PERFORMANCE BARRIER SCREW
|
Optimum use of master batch due to better mixing – and homogenous melt |
|
Cooling time reduces as plasticisation performs at low temperature |
|
Sub flight chops-up the solid & melted resin, and then mixes homogeneously |
|
Homogeneous melt and uniform resin mixing results less colour dispersion |
|
Better mixing of resin needs low screw reaction pressure |
OPTIONAL FEATURES
|
Variable delivery pump |
|
Single / double core pulling |
|
Air ejection system arrangement |
DIRECT CLAMPING INJECTION MOLDING MACHINE
|
Central direct clamping mechanism with double injection cylinder systems |
|
Accurate clamping pressure, quick mould close, short cycle time & high productivity |
|
Long mould opening strokes, less restriction on mould thickness |
|
Clamping force distributes evenly onto the mould & platen, more durability assures |
|
|
|
