For Sale - UM - 20480 - 1350 Mm Diamat/Welex Sheet Extrusion Line
Specification
Reference Number
UM - 20480Product
1350 Mm Diamat/Welex Sheet Extrusion LineLocation
EuropeProduct Details
100mm Diamat single screw extruder model DE100, 34d plugged vent with 200 kw AC motor,
B.D Plast dual pot screen changer 2013,
Gear pump,
1220 mm wide EDI flex lip die Model R100. No choker bar, heated die lips close approach. Was running PET. 2007
1350 mm wide Welex 3 roll polishing stack with silicone bath, ,haul off with pump group. 450x760x760mm diameter rolls. Chain driven 2007 Close coupled large diameter calender rolls running PET sheet from 300 micron to 1.4 mm thick. Up to 40 m/min.
Motorised height adjustment. Downstack configuration.
Side mounted pump group with additional heat exchanger. Motorised proportional valves.
1350 mm wide 2 roll haul off with pneumatic nip.
Operator boom control panel.
1350 mm wide Mondon dual 2 station turret winder (4 station in total) Max roll diameter 1000 mm.
Tension control, with overhead frame 1999.
Was running 0.2-2 mm sheet
Width from 300 mm to 1350 mm
1450 mm wide roller table
Roll diameters from 1 x 1000 mm or 2 x 600 mm
Max roll weight 1200 kgs
76,152,204 mm cores
Winding speeds from 4 m/min to 35 m/min
1300 mm guillotine.
B.D Plast dual pot screen changer 2013,
Gear pump,
1220 mm wide EDI flex lip die Model R100. No choker bar, heated die lips close approach. Was running PET. 2007
1350 mm wide Welex 3 roll polishing stack with silicone bath, ,haul off with pump group. 450x760x760mm diameter rolls. Chain driven 2007 Close coupled large diameter calender rolls running PET sheet from 300 micron to 1.4 mm thick. Up to 40 m/min.
Motorised height adjustment. Downstack configuration.
Side mounted pump group with additional heat exchanger. Motorised proportional valves.
1350 mm wide 2 roll haul off with pneumatic nip.
Operator boom control panel.
1350 mm wide Mondon dual 2 station turret winder (4 station in total) Max roll diameter 1000 mm.
Tension control, with overhead frame 1999.
Was running 0.2-2 mm sheet
Width from 300 mm to 1350 mm
1450 mm wide roller table
Roll diameters from 1 x 1000 mm or 2 x 600 mm
Max roll weight 1200 kgs
76,152,204 mm cores
Winding speeds from 4 m/min to 35 m/min
1300 mm guillotine.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}