For Sale - UM - 28821 - Colines 5 Layer Cast Film Line
Specification
Reference Number
UM - 28821Product
Colines 5 Layer Cast Film LineYear Of Manufacture
2017Present Condition
Can be seen in running conditionLocation
IndiaProduct Details
Film extrusion lines - Cast film
Manufacturer: Gruppo Colines SpA
Model: POLYCAST®
Year: 2016, Start in 2017
Number of layers: 5
Film structure: ACBCD/BBACD/DCABB (Through Selector Plug)
Material: CPP and CPE (With EVOH)
Film width (mm): 2500
Speed (m/min): 450 m/ min mechanical
Output (Kg/h): 1100kg/h (depending on materials and formulations)
Extruder 1/3/4 Layer ref: D/C/A respectively.
Screw diam 1: 90mm L/D30,
Max throughput capacity: - output 200 kg/h
3 component DOTECO gravimetric dosing Module with vacuum feeders. max screw rpm 132.3
AC motor 102 kW, liquid cooled with flexible transmission joint and encoder for speed control.
Temperature control of barrels by means of Fe-Cost thermocouples
Extrusion barrel & screw made of nitride steel depth up to 0.4mm, lapped inside.
Barrel covered by welded sheet iron with internal stainless-steel mirror for reflecting heat to avoid dispersion. Heating done by ceramic heaters.
Hydraulic screen changer
Parallel axis gear box with ground gears with helical profile and high load coefficient.
Feeding zone provided with sleeve and jacket for thermoregulation by means of liquid.
Extruder 2 Layer ref: B
Screw diam 2: 140mm L/D30
Max throughput capacity: - output 700 kg/h
3 comp DOTECO gravimetric dosing Module with vacuum feeders
Max screw rpm 112.5 -AC motor 276 kW, liquid cooled with flexible transmission joint and encoder for speed control.
Temperature control of barrels by means of Fe-Cost thermocouples
Extrusion barrel & screw made of nitride steel depth up to 0.4mm, lapped inside.
Barrel covered by welded sheet iron with internal stainless-steel mirror for reflecting heat to avoid dispersion. Heating done by ceramic heaters.
Hydraulic screen changer
Parallel axis gear box with ground gears with helical profile and high load coefficient.
Feeding zone provided with sleeve and jacket for thermoregulation by means of liquid.
Flat Extrusion Die: - Make CLOEREN/USA (3000mm wide)
Lip flex range-1.5mm (0.060”)
Additional selector plugs for ACBCD/BBACD/DCABB structures
Computer controlled lip adjustment system
One GemNi™ Plating- enhanced nickel plating for corrosion resistance with nanometer silicon-carbide particles in the nickel matrix for exceptional hardness characteristics.
Chill roll unit:
Primary chill roll 1000mm diam 3100mm wide
Second chill roll 450mm diam
Independent gearboxes and drive of each chill roller effected through two a.c motors with encoders and tangential cooling fans.
Air knife with motorized position
Pneumatic + Electrostatic edge pinning via high voltage electrodes
Air Exhaust fumes removal
Thickness control system: - Automatic thickness profile control system
Thickness gauge Make: SCANTECH
Type of measurement: IR - Model: UL02B-3500
Scantech APC model- APC1-001B
Corona treatment Unit: - Make Me.Ro
Model- MK/T 40k-IGBT/3f
Silicon process roller diam 300mm
Treatment width 2550mm
Generator's output 40kW
Rewinder:
Max reel diameter (mm): 1200mm
Rewinder description: - FLEXIWIND® -automatic double winding station.
Crane for the positioning of the finished reel on cradle/rack and for repositioning shaft.
max film width 2500mm
Core's diam 152mm
Setting and display of winder is realized by Siemens supervision panel with Siemens pro tool development ambient.
Manufacturer: Gruppo Colines SpA
Model: POLYCAST®
Year: 2016, Start in 2017
Number of layers: 5
Film structure: ACBCD/BBACD/DCABB (Through Selector Plug)
Material: CPP and CPE (With EVOH)
Film width (mm): 2500
Speed (m/min): 450 m/ min mechanical
Output (Kg/h): 1100kg/h (depending on materials and formulations)
Extruder 1/3/4 Layer ref: D/C/A respectively.
Screw diam 1: 90mm L/D30,
Max throughput capacity: - output 200 kg/h
3 component DOTECO gravimetric dosing Module with vacuum feeders. max screw rpm 132.3
AC motor 102 kW, liquid cooled with flexible transmission joint and encoder for speed control.
Temperature control of barrels by means of Fe-Cost thermocouples
Extrusion barrel & screw made of nitride steel depth up to 0.4mm, lapped inside.
Barrel covered by welded sheet iron with internal stainless-steel mirror for reflecting heat to avoid dispersion. Heating done by ceramic heaters.
Hydraulic screen changer
Parallel axis gear box with ground gears with helical profile and high load coefficient.
Feeding zone provided with sleeve and jacket for thermoregulation by means of liquid.
Extruder 2 Layer ref: B
Screw diam 2: 140mm L/D30
Max throughput capacity: - output 700 kg/h
3 comp DOTECO gravimetric dosing Module with vacuum feeders
Max screw rpm 112.5 -AC motor 276 kW, liquid cooled with flexible transmission joint and encoder for speed control.
Temperature control of barrels by means of Fe-Cost thermocouples
Extrusion barrel & screw made of nitride steel depth up to 0.4mm, lapped inside.
Barrel covered by welded sheet iron with internal stainless-steel mirror for reflecting heat to avoid dispersion. Heating done by ceramic heaters.
Hydraulic screen changer
Parallel axis gear box with ground gears with helical profile and high load coefficient.
Feeding zone provided with sleeve and jacket for thermoregulation by means of liquid.
Flat Extrusion Die: - Make CLOEREN/USA (3000mm wide)
Lip flex range-1.5mm (0.060”)
Additional selector plugs for ACBCD/BBACD/DCABB structures
Computer controlled lip adjustment system
One GemNi™ Plating- enhanced nickel plating for corrosion resistance with nanometer silicon-carbide particles in the nickel matrix for exceptional hardness characteristics.
Chill roll unit:
Primary chill roll 1000mm diam 3100mm wide
Second chill roll 450mm diam
Independent gearboxes and drive of each chill roller effected through two a.c motors with encoders and tangential cooling fans.
Air knife with motorized position
Pneumatic + Electrostatic edge pinning via high voltage electrodes
Air Exhaust fumes removal
Thickness control system: - Automatic thickness profile control system
Thickness gauge Make: SCANTECH
Type of measurement: IR - Model: UL02B-3500
Scantech APC model- APC1-001B
Corona treatment Unit: - Make Me.Ro
Model- MK/T 40k-IGBT/3f
Silicon process roller diam 300mm
Treatment width 2550mm
Generator's output 40kW
Rewinder:
Max reel diameter (mm): 1200mm
Rewinder description: - FLEXIWIND® -automatic double winding station.
Crane for the positioning of the finished reel on cradle/rack and for repositioning shaft.
max film width 2500mm
Core's diam 152mm
Setting and display of winder is realized by Siemens supervision panel with Siemens pro tool development ambient.
{{comment.DateTimeStampDisplay}}
{{comment.Comments}}