For Sale - UM - 22193 - 5 Layer Rajoo Co-Extrusion Blown Film Plant

Specification

Reference Number

UM - 22193

Product

5 Layer Rajoo Co-Extrusion Blown Film Plant

Year Of Manufacture

2005

Location

India

Product Details

Material:-evoh/nylon & also we can run LLDPE/LDPE & HDPE in all layers
Motor hp of each extruders:-Extruder -A/B/C/D/E - 45 KW/30 KW/30 KW/30 KW/45 KW
Dosing units are installed in all extruders
Make of dosing units:-Rajoo ( bri air )
No. of components of each dosing unit one in each dosing system ( but Raw material suck in auto mode )
Volumetric dosing system
Machine can run with IBC unit & without IBC unit ( both )
Air blower motor hp of obc & ibc:-15kw for obc & 5.5 kw ( in ) & 5.5 kw
(out ) for ibc
Chiller TR of ibc and obc:-15 Ton - for IBC & 30 Ton -for OBC
You have to increase or reduce width manually , and no any thickness controller system installed
Treater:-IEEC ( autowatt density corona )
Web guider BST internation
Winder is semi automatic but roll spliced in auto mode
Winder 4 station
Min & max film thickness:-18 mic to 160 mic
Nylon/evoh/eva (min. thickness of these layers possible):-min 3 micron to 15 mic
Average production (kg/hour):-160 kg to 220 kg as per job
Height of take-up tower:-Approx 40 feet
Component volumetric dosing unit
We have to mix all raw materialmanually inor out side drum then auto suck to hopper loader then transfer through hopper loader to main hopper then extruder
Total installed power excluding chillers:-230 kw
Total all heater load:-126 kw










{{comment.Name}} made a post.
{{comment.DateTimeStampDisplay}}

{{comment.Comments}}

COMMENTS

0

There are no comments to display. Be the first one to comment!

*

Name Required.

*

Email Id Required.

Email Id Not Valid.

*

Mobile Required.

Email ID and Mobile Number are kept private and will not be shown publicly.
*

Message Required.

Click to Change image  Refresh Captcha